Clear All
System of Measurement System of Measurement |
|---|
|
Lubricant Lubricant |
|---|
|
Plain Bearing Type Plain Bearing Type |
|---|
 | Thrust |
Material Material |
|---|
|
For Load Direction For Load Direction |
|---|
 | Thrust |
Lubrication Lubrication |
|---|
|
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
Lubrication Method Lubrication Method |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Plain Bearings
More
High-Load Ultra-Low-Friction Oil-Embedded Thrust Bearings
Use these bearings for frequent starts and stops in high-load applications. For low friction coefficients, they release a thin layer of an embedded PTFE lubricant during startup friction. Increased iron content makes them stronger and more resistant to shock loads than standard bearings. However, these bearings operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
| OD, mm | Thickness, mm | Dynamic Thrust Load Capacity | Lubrication | Lubrication Method | Temperature Range, °F | Each | |
863 Bearing Bronze Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 6mm Shaft Dia. | |||||||
| 12 | 1.5 | 310 lbs. @ 120 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 00000 |
For 8mm Shaft Dia. | |||||||
| 16 | 1.5 | 410 lbs. @ 120 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 10mm Shaft Dia. | |||||||
| 18 | 1.5 | 420 lbs. @ 120 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 18 | 2 | 420 lbs. @ 120 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 12mm Shaft Dia. | |||||||
| 24 | 2 | 620 lbs. @ 120 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 24 | 3 | 620 lbs. @ 120 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 14mm Shaft Dia. | |||||||
| 28 | 2 | 1,400 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 15mm Shaft Dia. | |||||||
| 30 | 2 | 1,550 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 30 | 3 | 1,550 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 16mm Shaft Dia. | |||||||
| 32 | 2 | 1,650 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 32 | 3 | 1,650 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 18mm Shaft Dia. | |||||||
| 36 | 2 | 1,850 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 36 | 3 | 1,850 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 20mm Shaft Dia. | |||||||
| 40 | 2 | 2,050 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 40 | 3 | 2,050 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 24mm Shaft Dia. | |||||||
| 48 | 3 | 2,450 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 48 | 4 | 2,450 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 25mm Shaft Dia. | |||||||
| 50 | 3 | 2,550 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
| 50 | 4 | 2,550 lbs. @ 60 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 0000 |
For 30mm Shaft Dia. | |||||||
| 60 | 4 | 6,200 lbs. @ 30 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 00000 |
| 60 | 5 | 6,200 lbs. @ 30 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 00000 |
For 40mm Shaft Dia. | |||||||
| 60 | 4 | 4,550 lbs. @ 30 rpm | Lubricated | Embedded | -60° to 300° | 0000000 | 00000 |