System of Measurement
    System of Measurement
    Inch
    Metric
    Plain Bearing Type
    Plain Bearing Type
    Flanged
    Material
    Material
    Bronze
    Lubrication
    Lubrication
    Lubricated
    Bearing Type
    Bearing Type
    Plain
    For Load Direction
    For Load Direction
    Combined
    Radial and
    Thrust
    Shaft Mount Type
    Shaft Mount Type
    Slip Fit
    Dynamic Radial Load Capacity
    Dynamic Radial Load Capacity
    1,250 lbs. @ 30 rpm
    1,650 lbs. @ 30 rpm
    1,850 lbs. @ 30 rpm
    2,250 lbs. @ 30 rpm
    2,300 lbs. @ 30 rpm
    2,450 lbs. @ 30 rpm
    2,500 lbs. @ 30 rpm
    2,700 lbs. @ 30 rpm
    2,750 lbs. @ 30 rpm
    2,800 lbs. @ 30 rpm
    3,000 lbs. @ 30 rpm
    3,100 lbs. @ 30 rpm
    3,150 lbs. @ 30 rpm
    3,450 lbs. @ 30 rpm
    3,750 lbs. @ 30 rpm
    4,450 lbs. @ 30 rpm
    4,500 lbs. @ 30 rpm
    4,950 lbs. @ 30 rpm
    5,000 lbs. @ 30 rpm
    6,500 lbs. @ 30 rpm
    7,750 lbs. @ 30 rpm
    8,000 lbs. @ 30 rpm
    8,250 lbs. @ 30 rpm
    8,750 lbs. @ 30 rpm
    14,250 lbs. @ 30 rpm
    550 lbs. @ 60 rpm
    590 lbs. @ 60 rpm
    600 lbs. @ 60 rpm
    620 lbs. @ 60 rpm
    660 lbs. @ 60 rpm
    690 lbs. @ 60 rpm
    740 lbs. @ 60 rpm
    750 lbs. @ 60 rpm
    780 lbs. @ 60 rpm
    790 lbs. @ 60 rpm
    870 lbs. @ 60 rpm
    930 lbs. @ 60 rpm
    950 lbs. @ 60 rpm
    990 lbs. @ 60 rpm
    1,000 lbs. @ 60 rpm
    1,100 lbs. @ 60 rpm
    1,150 lbs. @ 60 rpm
    1,200 lbs. @ 60 rpm
    1,250 lbs. @ 60 rpm
    1,300 lbs. @ 60 rpm
    1,350 lbs. @ 60 rpm
    1,500 lbs. @ 60 rpm
    1,550 lbs. @ 60 rpm
    1,750 lbs. @ 60 rpm
    1,850 lbs. @ 60 rpm
    1,900 lbs. @ 60 rpm
    1,950 lbs. @ 60 rpm
    2,000 lbs. @ 60 rpm
    2,150 lbs. @ 60 rpm
    2,250 lbs. @ 60 rpm
    2,300 lbs. @ 60 rpm
    2,500 lbs. @ 60 rpm
    3,000 lbs. @ 60 rpm
    4,000 lbs. @ 60 rpm
    13 lbs. @ 120 rpm
    17 lbs. @ 120 rpm
    18 lbs. @ 120 rpm
    31 lbs. @ 120 rpm
    37 lbs. @ 120 rpm
    39 lbs. @ 120 rpm
    46 lbs. @ 120 rpm
    49 lbs. @ 120 rpm
    55 lbs. @ 120 rpm
    60 lbs. @ 120 rpm
    70 lbs. @ 120 rpm
    75 lbs. @ 120 rpm
    90 lbs. @ 120 rpm
    95 lbs. @ 120 rpm
    110 lbs. @ 120 rpm
    115 lbs. @ 120 rpm
    125 lbs. @ 120 rpm
    140 lbs. @ 120 rpm
    145 lbs. @ 120 rpm
    155 lbs. @ 120 rpm
    160 lbs. @ 120 rpm
    170 lbs. @ 120 rpm
    185 lbs. @ 120 rpm
    195 lbs. @ 120 rpm
    230 lbs. @ 120 rpm
    245 lbs. @ 120 rpm
    250 lbs. @ 120 rpm
    290 lbs. @ 120 rpm
    310 lbs. @ 120 rpm
    370 lbs. @ 120 rpm
    390 lbs. @ 120 rpm
    430 lbs. @ 120 rpm
    440 lbs. @ 120 rpm
    460 lbs. @ 120 rpm
    490 lbs. @ 120 rpm
    500 lbs. @ 120 rpm
    560 lbs. @ 120 rpm
    590 lbs. @ 120 rpm
    620 lbs. @ 120 rpm
    650 lbs. @ 120 rpm
    740 lbs. @ 120 rpm
    750 lbs. @ 120 rpm
    1,000 lbs. @ 120 rpm
    For Shaft Type
    For Shaft Type
    Round
    Maximum Temperature
    Maximum Temperature
    Less than 250° F
    250° to 499° F
    Minimum Temperature
    Minimum Temperature
    -49° to 0° F
    Greater than 0° F
    Lubricant
    Lubricant
    SAE 30 Oil
    Flange Thickness Tolerance
    Flange Thickness Tolerance
    -0.005"
    -0.0025"
    0.0025"
    0.005"
    -0.127mm
    -0.1mm
    -0.064mm
    0.064mm
    0.1mm
    0.127mm
    Lubrication Method
    Lubrication Method
    Embedded
    DFARS (Defense Acquisition Regulations Supplement)
    DFARS (Defense Acquisition
    Regulations Supplement)
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    205 Products