Filter by
Shank Thread Size
Shank Thread Direction
DFARS Compliance
About Rod Ends
More
Oil-Embedded Ball Joint Rod Ends with Grease Fitting
An oil-embedded bronze insert slowly releases lubricant to the rod end. Relubrication is recommended but not required. Connect your grease gun to the fitting to relubricate. Made of zinc-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID, mm | Max. Ball Swivel | O'all Wd., mm | O'all Thick., mm | Shank Center Lg., mm | Shank Thread Lg., mm | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| M8 × 1.25 mm | 8 | 18° | 22 | 12 | 42 | 25 | 4,000 | Zinc-Plated Carbon Steel | 0000000 | 000000 | |
| M10 × 1.5 mm | 10 | 17° | 27 | 14 | 48 | 29 | 6,250 | Zinc-Plated Carbon Steel | 0000000 | 00000 | |
| M12 × 1.75 mm | 12 | 17° | 30 | 16 | 54 | 33 | 7,750 | Zinc-Plated Carbon Steel | 0000000 | 00000 |