Clear All
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
OD OD |
|---|
ID ID |
|---|
For Housing ID For Housing ID |
|---|
|
|
|
For Load Direction For Load Direction |
|---|
 | Radial |
Bearing Type Bearing Type |
|---|
 | Roller |
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
Lubrication Lubrication |
|---|
|
Roller Bearing Type Roller Bearing Type |
|---|
|
Construction Construction |
|---|
|
For Shaft Surface Smoothness (Ra) For Shaft SurfaceSmoothness (Ra) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
Lubricant Lubricant |
|---|
|
About Ball and Roller Bearings
More
Precision Needle-Roller Bearings
Bearing
Shaft Liner
Install these bearings directly onto hardened and ground shafts. They have higher load capacity, speed, and accuracy than standard needle-roller bearings.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants.
Shaft liners allow you to use the bearing on unhardened and unground shafts.
For technical drawings and 3-D models, click on a part number.
Bearings | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Radial Load Cap., lbs. | Optional Shaft Liners | |||||||||||||
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range., °F | Each | For Shaft Dia. | Each | ||
Open | ||||||||||||||
| 5/8" | 1 1/8" | 3/4" | Steel | 3,900 | 4,800 | 21,000 | Required | 16 | 0° to 245° | 0000000 | 000000 | 3/8" | 000000 | 000000 |
| 3/4" | 1 1/4" | 3/4" | Steel | 4,500 | 6,000 | 17,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1/2" | 000000 | 00000 |
| 7/8" | 1 3/8" | 3/4" | Steel | 4,700 | 6,700 | 15,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 5/8" | 000000 | 00000 |
| 1" | 1 1/2" | 3/4" | Steel | 5,200 | 7,900 | 13,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 3/4" | 000000 | 00000 |
| 1 1/8" | 1 5/8" | 1" | Steel | 7,600 | 13,200 | 12,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 7/8" | 000000 | 00000 |
| 1 1/4" | 1 3/4" | 1" | Steel | 7,900 | 14,200 | 11,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1" | 000000 | 00000 |
| 1 3/8" | 1 7/8" | 1" | Steel | 8,400 | 15,900 | 10,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1 1/8" | 000000 | 00000 |
| 1 1/2" | 2 1/16" | 1" | Steel | 8,100 | 16,000 | 9,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1 1/4" | 000000 | 00000 |
| 1 3/4" | 2 5/16" | 1" | Steel | 9,900 | 19,700 | 7,600 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1 1/2" | 000000 | 00000 |
| 5mm | 10mm | 10mm | Steel | 590 | 430 | 39,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | __ | 000000 | 00 |
| 6mm | 12mm | 12mm | Steel | 850 | 700 | 36,500 | Required | 4 | 0° to 245° | 0000000 | 00000 | __ | 000000 | 00 |
| 8mm | 15mm | 12mm | Steel | 890 | 920 | 29,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 5mm | 0000000 | 0000 |
| 10mm | 17mm | 12mm | Steel | 1,050 | 1,200 | 27,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 7mm | 0000000 | 0000 |
| 12mm | 19mm | 16mm | Steel | 2,000 | 2,450 | 25,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 9mm | 0000000 | 0000 |
| 14mm | 22mm | 16mm | Steel | 2,250 | 2,600 | 24,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 10mm | 0000000 | 0000 |
| 15mm | 23mm | 16mm | Steel | 2,700 | 2,850 | 23,500 | Required | 4 | 0° to 245° | 0000000 | 00000 | 12mm | 0000000 | 0000 |
| 18mm | 26mm | 16mm | Steel | 2,800 | 3,650 | 21,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 15mm | 0000000 | 00000 |
| 20mm | 28mm | 20mm | Steel | 4,150 | 5,350 | 21,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 17mm | 0000000 | 00000 |
| 25mm | 33mm | 16mm | Steel | 3,350 | 5,000 | 17,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 20mm | 0000000 | 00000 |
| 30mm | 40mm | 20mm | Steel | 5,100 | 8,100 | 14,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 25mm | 0000000 | 00000 |
Sealed | ||||||||||||||
| 5/8" | 1 1/8" | 1" | Steel | 4,300 | 4,300 | 6,100 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 3/8" | 0000000 | 00000 |
| 3/4" | 1 1/4" | 1" | Steel | 4,950 | 5,400 | 5,100 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1/2" | 0000000 | 00000 |
| 7/8" | 1 3/8" | 1" | Steel | 5,250 | 6,000 | 4,400 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 5/8" | 0000000 | 00000 |
| 1" | 1 1/2" | 1" | Steel | 5,800 | 7,100 | 3,800 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 3/4" | 0000000 | 00000 |
| 1 1/8" | 1 5/8" | 1 1/4" | Steel | 8,700 | 12,200 | 3,400 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 7/8" | 0000000 | 00000 |
| 1 1/4" | 1 3/4" | 1 1/4" | Steel | 9,000 | 13,100 | 3,000 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1" | 0000000 | 00000 |
| 1 1/2" | 2 1/16" | 1 1/4" | Steel | 10,300 | 15,500 | 2,500 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1 1/4" | 0000000 | 00000 |