For Shaft Diameter For Shaft Diameter |
|---|
Thickness Thickness |
|---|
OD OD |
|---|
ID ID |
|---|
|
Washer Material Washer Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Washers for Needle-Roller Thrust Bearings
Washer
Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Thick. | Washer Material | Specifications Met | Each | |
| 1/4" | 0.687" | 0.095" | Steel | __ | 00000000 | 00000 |
| 1/4" | 11/16" | 0.032" | Steel | __ | 00000000 | 0000 |
| 5/16" | 3/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 5/16" | 3/4" | 1/16" | Steel | __ | 00000000 | 0000 |
| 3/8" | 0.812" | 0.063" | Steel | __ | 00000000 | 0000 |
| 3/8" | 13/16" | 0.032" | Steel | __ | 00000000 | 0000 |
| 1/2" | 0.937" | 0.063" | Steel | __ | 00000000 | 0000 |
| 1/2" | 0.937" | 0.095" | Steel | __ | 00000000 | 0000 |
| 1/2" | 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 9/16" | 1" | 1/32" | Steel | __ | 00000000 | 0000 |
| 9/16" | 1" | 1/16" | Steel | __ | 00000000 | 0000 |
| 5/8" | 1 1/8" | 0.032" | Steel | __ | 0000000 | 0000 |
| 5/8" | 1 1/8" | 0.063" | Steel | __ | 00000000 | 0000 |
| 5/8" | 1 1/8" | 0.095" | Steel | __ | 00000000 | 0000 |
| 3/4" | 1 1/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 3/4" | 1 1/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 7/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 7/8" | 1 11/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1" | 1 9/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/8" | 1 3/4" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/4" | 1 15/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 3/8" | 2 1/16" | 0.126" | Steel | __ | 0000000 | 00000 |
| 1 1/2" | 2 3/16" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 1/2" | 2 3/16" | 0.126" | Steel | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.032" | Steel | __ | 0000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.063" | Steel | __ | 00000000 | 0000 |
| 1 3/4" | 2 1/2" | 0.126" | Steel | __ | 00000000 | 0000 |
| 2" | 2 3/4" | 0.032" | Steel | __ | 0000000 | 0000 |
| 2" | 2 3/4" | 0.126" | Steel | __ | 0000000 | 00000 |
| 2 1/8" | 2 7/8" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 1/8" | 2 7/8" | 1/16" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3" | 0.126" | Steel | __ | 00000000 | 0000 |
| 2 1/4" | 3 1/8" | 3/32" | Steel | __ | 00000000 | 00000 |
| 2 1/2" | 3 1/4" | 0.032" | Steel | __ | 00000000 | 0000 |
| 2 3/4" | 3 5/8" | 1/32" | Steel | __ | 00000000 | 0000 |
| 2 3/4" | 3 5/8" | 1/16" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.032" | Steel | __ | 00000000 | 00000 |
| 3" | 3 3/4" | 0.126" | Steel | __ | 00000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/32" | Steel | __ | 00000000 | 00000 |
| 3 1/4" | 4 1/8" | 1/8" | Steel | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 1/32" | Steel | __ | 00000000 | 00000 |
| 3 3/4" | 4 5/8" | 3/32" | Steel | __ | 00000000 | 00000 |
| 4 1/8" | 5" | 1/32" | Steel | __ | 00000000 | 00000 |
| 4 1/8" | 5" | 3/32" | Steel | __ | 00000000 | 00000 |
| 4mm | 14mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 5mm | 15mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 6mm | 19mm | 2.75mm | Steel | __ | 00000000 | 00000 |
| 8mm | 21mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 8mm | 21mm | 2.75mm | Steel | __ | 00000000 | 00000 |
| 10mm | 24mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 10mm | 24mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 12mm | 26mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 12mm | 26mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 15mm | 28mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 15mm | 28mm | 2.75mm | Steel | __ | 0000000 | 0000 |
| 17mm | 30mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 17mm | 30mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 18mm | 31mm | 1mm | Steel | __ | 0000000 | 0000 |
| 20mm | 35mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 20mm | 35mm | 2.75mm | Steel | __ | 0000000 | 00000 |
| 25mm | 42mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 25mm | 42mm | 3mm | Steel | __ | 0000000 | 00000 |
| 30mm | 47mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 30mm | 47mm | 3mm | Steel | __ | 0000000 | 00000 |
| 35mm | 52mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 35mm | 52mm | 3.5mm | Steel | __ | 0000000 | 00000 |
| 40mm | 60mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 40mm | 60mm | 3.5mm | Steel | __ | 00000000 | 00000 |
| 45mm | 65mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 45mm | 65mm | 4mm | Steel | __ | 0000000 | 00000 |
| 50mm | 70mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 50mm | 70mm | 4mm | Steel | __ | 0000000 | 00000 |
| 55mm | 78mm | 1mm | Steel | DIN 5405-3, ISO 303 | 0000000 | 0000 |
| 55mm | 78mm | 5mm | Steel | __ | 0000000 | 00000 |
| 60mm | 85mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 60mm | 85mm | 4.75mm | Steel | __ | 00000000 | 00000 |
| 65mm | 90mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 65mm | 90mm | 5.25mm | Steel | __ | 00000000 | 00000 |
| 70mm | 95mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 0000 |
| 70mm | 95mm | 5.25mm | Steel | __ | 00000000 | 00000 |