System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Housing ID For Housing ID |
---|
|
OD OD |
---|
|
ID ID |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Seal Type Seal Type |
---|
|
Ball Bearing Type Ball Bearing Type |
---|
![]() | Standard |
For Load Direction For Load Direction |
---|
![]() | Combined Radial and Thrust |
Trade Number Trade Number | Show |
---|
|
Trade Number Trade Number | Hide |
---|
Construction Construction |
---|
|
Maximum Speed Maximum Speed |
---|
|
Cage Material Cage Material |
---|
|
Lubrication Lubrication |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
ABEC Rating ABEC Rating |
---|
|
Contact Angle Contact Angle |
---|
|
Dynamic Combined Load Capacity Dynamic CombinedLoad Capacity |
---|
|
Maximum Radial Clearance Maximum Radial Clearance |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Radial Clearance Minimum Radial Clearance |
---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
---|
|
More
The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads.
Double-row bearings handle thrust loads in both directions.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Double Row | |||||||||||||
Sealed | |||||||||||||
3205-2RS | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 8,500 | Lubricated | 30° | -20° to 230° | ABEC-3 | 00000000 | 000000 |