System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Housing ID For Housing ID |
---|
|
OD OD |
---|
|
ID ID |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Seal Type Seal Type |
---|
|
Ball Bearing Type Ball Bearing Type |
---|
![]() | ![]() |
Standard | With Retaining Ring |
For Load Direction For Load Direction |
---|
![]() | Radial |
Trade Number Trade Number | Show |
---|
|
Trade Number Trade Number | Hide |
---|
Ring Material Ring Material |
---|
|
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Maximum Speed Maximum Speed |
---|
|
Ball Material Ball Material |
---|
|
Lubrication Lubrication |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Static Radial Load Capacity Static Radial Load Capacity |
---|
|
Construction Construction |
---|
|
More
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Bearings with retaining ring have a removable retaining ring that holds the bearing inside a housing.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6202-2Z | 15mm | 35mm | 11mm | Steel | 1,750 | 840 | 20,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Retaining Ring, mm | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6202-2Z | 15mm | 35mm | 11mm | 39.7 | 1.12 | Steel | 1,800 | 840 | 22,000 | Lubricated | -20° to 230° | ABEC-1 | 0000000 | 000000 |
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6202-2Z | 15 | 35 | 11 | Steel | 1,800 | 840 | 22,000 | Lubricated | -30° to 240° | ABEC-3 | 0000000 | 000000 |
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction. Use them in applications where precision movement is required, such as pick-and-place and automated indexing conveyor systems. Shields keep out dust and contaminants.
Shielded bearings dissipate heat better than sealed bearings, but don’t keep out as much dust.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | |||||||||||||
6202-2Z | 15 | 35 | 11 | Steel | 1,160 | 540 | 9,400 | 15 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 0000000 |
Bearings are 440C stainless steel for good corrosion resistance.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6202-2Z | 15mm | 35mm | 11mm | 440C Stainless Steel | 1,150 | 770 | 20,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 000000 |