System of Measurement System of Measurement |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
|
For Housing ID For Housing ID |
|---|
|
OD OD |
|---|
|
ID ID |
|---|
|
Bearing Type Bearing Type |
|---|
 | Ball |
Seal Type Seal Type |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
For Load Direction For Load Direction |
|---|
 | Radial |
Trade Number Trade Number | Show |
|---|
|
Trade Number Trade Number | Hide |
|---|
Inner Ring Type Inner Ring Type |
|---|
| Standard |
Ring Material Ring Material |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
Lubricant Lubricant |
|---|
|
Lubrication Lubrication |
|---|
|
Ball Material Ball Material |
|---|
|
Construction Construction |
|---|
|
About Ball and Roller Bearings
More
Ball Bearings
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
| 6208-2RS | 40mm | 80mm | 18mm | Steel | 6,500 | 4,000 | 5,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 000000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
| 6208-2RS | 40mm | 80mm | 18mm | Steel | 5,050 | 3,650 | 5,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
| 6208-2RS | 40 | 80 | 18 | Steel | 7,300 | 4,250 | 5,600 | Lubricated | -30° to 240° | ABEC-3 | 00000000 | 000000 |