System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Housing ID For Housing ID |
---|
|
OD OD |
---|
|
ID ID |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Seal Type Seal Type |
---|
|
Ball Bearing Type Ball Bearing Type |
---|
![]() | ![]() |
Standard | With Retaining Ring |
For Load Direction For Load Direction |
---|
![]() | Radial |
Trade Number Trade Number | Show |
---|
|
Trade Number Trade Number | Hide |
---|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Maximum Temperature Maximum Temperature |
---|
|
Lubricant Lubricant |
---|
|
Lubrication Lubrication |
---|
|
Construction Construction |
---|
|
Cage Material Cage Material |
---|
|
Seal Material Seal Material |
---|
|
More
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Bearings with retaining ring have a removable retaining ring that holds the bearing inside a housing.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6306-2RS | 30mm | 72mm | 19mm | Steel | 6,500 | 3,600 | 6,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 000000 |
Retaining Ring, mm | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6306-2RS | 30mm | 72mm | 19mm | 78.6 | 1.7 | Steel | 6,650 | 3,550 | 6,300 | Lubricated | -40° to 210° | ABEC-1 | 0000000 | 000000 |
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6306-2RS | 30mm | 72mm | 19mm | Steel | 4,600 | 3,150 | 5,700 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6306-2RS | 30 | 72 | 19 | Steel | 6,650 | 3,550 | 6,300 | Lubricated | -30° to 240° | ABEC-3 | 00000000 | 000000 |