System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Housing ID For Housing ID |
---|
|
OD OD |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Seal Type Seal Type |
---|
|
Ball Bearing Type Ball Bearing Type |
---|
![]() | Standard |
For Load Direction For Load Direction |
---|
![]() | Radial |
Trade Number Trade Number | Show |
---|
|
Trade Number Trade Number | Hide |
---|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
---|
|
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Lubricant Lubricant |
---|
|
Maximum Radial Clearance Maximum Radial Clearance |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Radial Clearance Minimum Radial Clearance |
---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
---|
|
Shaft Mount Type Shaft Mount Type |
---|
|
Shield Material Shield Material |
---|
|
Static Radial Load Capacity Static Radial Load Capacity |
---|
|
ABEC Rating ABEC Rating |
---|
|
More
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6310-2Z | 50mm | 110mm | 27mm | Steel | 13,900 | 8,100 | 6,000 | Lubricated | -20° to 230° | ABEC-1 | 00000000 | 000000 |
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing. The ceramic balls generate less heat than steel balls, so they require lubrication less frequently. Shields keep out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6310-2Z | 50 | 110 | 27 | Steel | 15,200 | 8,300 | 9,700 | Lubricated | -20° to 245° | ABEC-1 | 0000000 | 0000000 |