System of Measurement System of Measurement |
---|
|
For Shaft Diameter For Shaft Diameter |
---|
|
For Housing ID For Housing ID |
---|
|
OD OD |
---|
|
ID ID |
---|
|
Bearing Type Bearing Type |
---|
![]() | Ball |
Seal Type Seal Type |
---|
|
For Load Direction For Load Direction |
---|
![]() | Radial |
Trade Number Trade Number | Show |
---|
|
Trade Number Trade Number | Hide |
---|
Ring Material Ring Material |
---|
|
ABEC Rating ABEC Rating |
---|
|
For Shaft Type For Shaft Type |
---|
![]() | Round |
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
Lubrication Lubrication |
---|
|
Flange OD Flange OD |
---|
|
Maximum Speed Maximum Speed |
---|
|
Maximum Radial Clearance Maximum Radial Clearance |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Radial Clearance Minimum Radial Clearance |
---|
|
Radial Clearance Trade Number Radial ClearanceTrade Number |
---|
|
Shield Material Shield Material |
---|
|
More
Bearings are 440C stainless steel for good corrosion resistance.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
689-2Z | 9mm | 17mm | 5mm | 440C Stainless Steel | 290 | 120 | 43,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 00000 |
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Trade No. | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
689-2Z | 9mm | 17mm | 5mm | 19mm | 1.1mm | 440C Stainless Steel | 290 | 120 | 43,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 000000 |