Filter by
Bearing Type
For Load Direction
Bearing Trade Number
DFARS Compliance
About Ball and Roller Bearings
More
Set Screw Collar Ball Bearings
With Retaining Ring
Slip these bearings onto a shaft and secure with the included set screws, no special tools required. All have an extended inner ring for additional shaft support.
Bearings with a black-oxide steel ring have some corrosion resistance.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Bearings with a retaining ring have a removable retaining ring that holds the bearing inside a housing.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | ABEC Rating | Each | |
Sealed (Lubricated) | ||||||||||||||
Black-Oxide Steel—With Retaining Ring | ||||||||||||||
| ER210 | 50mm | 90mm | 28.6mm | 62.7mm | 51.6mm | 96mm | 2.4mm | 7,850 | 5,200 | 3,550 | -20° to 220° | ABEC-1 | 0000000 | 0000000 |