Selecting Compatible Lead Screws and Nuts
More
Solid-Surface Square Turntables
Add rotational positioning to machinery and equipment. Turntables are lubricated to provide smoother, quieter motion compared to similar unlubricated turntables.
For technical drawings and 3-D models, click on a part number.
Bearing | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Overall Ht. | Material | Type | Material | Lubrication Port | Mounting Fasteners Included | Each | |
Lubricated | ||||||||||
10,000 | 8.5" | 8.5" | 2.5" | Painted Steel | Ball | Steel | Grease Fitting | No | 000000000 | 0000000 |
Square Extreme-Capacity Turntables
Add a rotational positioning to machinery and equipment. Mount with standard Grade 5 or stronger hex head bolts (not included).
For technical drawings and 3-D models, click on a part number.
Lockable Turntables
Lock into one of four positions. To unlock, pull the ring on the spring-loaded locking pin. Turntables add rotational positioning to machinery and equipment.
For technical drawings and 3-D models, click on a part number.
Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Overall Ht. | Material | Type | Material | Mounting Fasteners Included | Each | |
Lubricated | |||||||||
30,000 | 8.5" | 8.5" | 2.88" | Painted Steel | Ball | Steel | No | 000000 | 0000000 |
End Supports for Lead Screws and Ball Screws
A set of ball bearings reduces friction and secures the end of a ball or lead screw. Note: The end of your ball or lead screw must be machined before installing it into an end support.
For technical drawings and 3-D models, click on a part number.
End supports for combined radial and thrust loads handle radial loads (perpendicular to the lead screw) and thrust loads (parallel to the lead screw).
Combined Load Cap., lbs. | Face Mounting Holes | Top Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | Ht. | Center Ht. | Wd. | Dp. | Static | Dynamic | No. of Mounting Holes | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Ht. | Dia. | Ctr.-to-Ctr. Wd. | Temperature Range, °F | Each | |
Alloy Steel | |||||||||||||||
1 49/64" | 5 5/8" | 2 13/16" | 8 1/2" | 4 5/32" | 15,000 | 9,000 | 10 | 13/16" | 6 5/8" | 3 5/8" | 1 1/32" | 6 5/8" | -40° to 210° | 00000000 | 000000000 |
Bearing Separators
Clamping
Screw
Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included) to remove them from the shaft.
Separators can be used with Face-Grip Pullers. Select a face-grip puller with a leg thread size that matches the thread size of your separator.
Separators with a clamping screw use screw tension to force separator plates under bearings when there isn’t enough space for them to fit.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
---|---|---|---|---|---|---|
Spreader Opening | Size | Pitch | Lg. | Wd. | Each | |
Steel Separators with Clamping Screw | ||||||
1 3/16"-5 3/4" | M18 | 1.5 mm | 14 1/4" | 8 1/2" | 00000000 | 0000000 |