Steel Bellows | McMaster-Carr

Choose a Category

Clear All

	Shape Shape

Round

Tapered Round

Rectangle

Square

	Extended Length Extended Length

Less than 10"

10" to 24.9"

25" to 49.9"

	System of Measurement System of Measurement

Inch

	ID ID

	End Style End Style

	Cuff

	Material Material	Show

Steel

	Material Material	Hide

	Flexibility Flexibility

	Rigid

	Capacity Capacity

Less than 1,000 lbs.

1,000 to 1,999 lbs.

2,000 to 3,999 lbs.

4,000 lbs. or greater

	Width Width

	Power Source Power Source

Electric

Air

Manual

	Protects Against Protects Against

	Construction Construction

Coiled

	Length Length

	Minimum Height Minimum Height

5"-21"

5"-28"

5"-30"

6"-28"

6"-31 1/2"

6"-42"

6 1/2"-42 1/2"

7"-32"

8"-32"

8"-43 1/2"

8"-44"

8 1/2"-33 1/2"

8 1/2"-38 1/2"

9"-42 1/2"

9"-48"

9 1/2"-54"

11 1/2"-41 1/2"

12"-45 1/2"

	Travel Length Travel Length

	Retracted Length Retracted Length

1/2"

3/4"

1 3/8"

	Lift Mechanism Lift Mechanism

Hydraulics

Air Bag

	Material Thickness Material Thickness

0.01"

0.015"

0.02"

	Adjustment Type Adjustment Type

Foot

Hand

	OD OD

	Motor Input Voltage Motor Input Voltage

120V AC

480V AC

	Base Length Base Length

	Base Width Base Width

View catalog pages (4)

Forward

How can we improve?

63 Products

Metal Telescoping Bellows

Made of coiled spring steel, these bellows protect equipment from hot and sharp chips. Slide them over moving parts, such as rods and shafts, and their spring action will hold them in place as they extend and retract between two parallel surfaces. Choose a bellows with an ID that's at least 1/4" larger than the diameter of the item to be covered.

		Length
ID	OD	Extended	Retracted	Travel	Material	Material Thick.		Each
Protects Against Abrasive Grit, Coolant, Cutting Fluid, Dust, Metal Chips, Oil, Solvents, Sparks, Synthetic Oil
1/2"	1"	4"	1/2"	3 1/2"	Spring Steel	0.01"	00000000	000000
3/4"	1 3/8"	10"	3/4"	9 1/4"	Spring Steel	0.01"	00000000	00000
1"	1 3/4"	10"	1"	9"	Spring Steel	0.015"	00000000	00000
1 1/4"	2 1/16"	1 ft.	1 3/8"	10 5/8"	Spring Steel	0.015"	00000000	00000
1 1/2"	2 1/4"	10"	1 3/8"	8 5/8"	Spring Steel	0.015"	00000000	00000
1 1/2"	2 3/8"	1 1/2 ft.	2"	16"	Spring Steel	0.015"	00000000	00000
1 3/4"	2 3/4"	3 ft.	3"	33"	Spring Steel	0.015"	00000000	000000
2 1/4"	3 5/8"	3 ft.	3"	33"	Spring Steel	0.02"	00000000	000000

Electric Stationary Lift Tables

Hand-Operated with External Motor

Hand-Operated with Internal Motor

Foot-Operated with Internal Motor

Bellows

An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables															Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Elevation Speed, in./sec.	Material	Duty Cycle	Motor Phase	Motor Full Load Current	Plug Type	Power Cord Lg., ft.	Control Cord Lg., ft.	Specifications Met		Each		Each
Hand-Operated with 120V AC External Motor
550	32"	19 1/2"	6"-28"	2 1/4	Steel	9 cycles per hour	Single	8.4A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	0000000	000000000	0000000	0000000
660	40"	20"	9 1/2"-54"	3 1/4	Steel	9 cycles per hour	Single	8.4A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	00000000
1,100	25 1/2"	18"	8 1/2"-33 1/2"	1 3/4	Steel	9 cycles per hour	Single	8.4A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	000000
1,100	40"	20"	6"-31 1/2"	2	Steel	9 cycles per hour	Single	8.4A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	000000
1,650	40"	20"	6"-31 1/2"	1 1/2	Steel	9 cycles per hour	Single	8.4A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	000000
Hand-Operated with 120V AC Internal Motor
2,000	48"	28"	8 1/2"-38 1/2"	1 1/4	Steel	9 cycles per hour	Single	10.8A	Three Prong	8	10	ANSI MH 29.1, NEMA 12	0000000	00000000	0000000	000000
2,000	48"	36"	8 1/2"-38 1/2"	1 1/4	Steel	9 cycles per hour	Single	10.8A	Three Prong	8	10	ANSI MH 29.1, NEMA 12	0000000	00000000	0000000	000000
3,000	48"	28"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	000000
3,000	48"	36"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	000000
5,000	56"	32"	9"-48"	3/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	00000000
5,000	72"	48"	9"-48"	3/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	00000000
Hand-Operated with 480V AC Internal Motor
3,000	48"	28"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	000000
3,000	48"	36"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	000000
5,000	56"	32"	9"-48"	3/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	00000000
5,000	72"	48"	9"-48"	3/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 4	00000000	00000000	0000000	00000000
Foot-Operated with 120V AC Internal Motor
3,000	48"	28"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	000000
3,000	48"	36"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	000000
5,000	56"	32"	9"-48"	3/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	00000000
5,000	72"	48"	9"-48"	3/4	Steel	9 cycles per hour	Single	14.5A	Three Prong	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	00000000
Foot-Operated with 480V AC Internal Motor
3,000	48"	28"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	000000
3,000	48"	36"	9"-42 1/2"	1 1/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	000000
5,000	56"	32"	9"-48"	3/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	00000000
5,000	72"	48"	9"-48"	3/4	Steel	9 cycles per hour	Three	2.2A	__	8	10	ANSI MH 29.1, NEMA 1	00000000	00000000	0000000	00000000

Turntable-Top Electric Stationary Lift Tables

Round

Square

Bellows

The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables															Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Elevation Speed, in./sec.	Tabletop Ga.	Turntable Dia.	Material	Duty Cycle	Motor Full Load Current	Plug Type	Control Cord Lg., ft.	Specifications Met		Each		Each
Round with 120V AC Motor
2,000	__	__	11 1/2"-41 1/2"	1 1/4	11	43"	Steel	9 cycles per hour	14.5A	Three Prong	10	ANSI MH 29.1, NEMA 1	0000000	000000000	0000000	0000000
3,000	__	__	12"-45 1/2"	1 1/4	11	43"	Steel	9 cycles per hour	14.5A	Three Prong	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	000000
Square with 120V AC Motor
3,500	48"	48"	8"-43 1/2"	3/4	7	43"	Steel	20 cycles per hour	17A	Three Prong	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	000000

Electric Stationary Lift Tables for Tight Spaces

With External Motor

With Internal Motor

Bellows

These tables are compact, yet provide the lifting capacity of standard lift tables. They have an electric motor and a hydraulic pump to perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables																Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Elevation Speed, in./sec.	Tabletop Ga.	Material	Duty Cycle	Motor Phase	Motor Full Load Current	Plug Type	Power Cord Lg., ft.	Control Cord Lg., ft.	Specifications Met		Each		Each
With 120V AC External Motor
500	25"	12"	5"-30"	1 3/4	7	Steel	12 cycles per hour	Single	8.4A	Three Prong	10	10	ANSI MH 29.1, NEMA 1	0000000	000000000	0000000	0000000
With 120V AC Internal Motor
2,000	42"	18"	6"-42"	1	7	Steel	12 cycles per hour	Single	8.4A	Three Prong	10	10	ANSI MH 29.1, NEMA 1	0000000	00000000	0000000	000000

Long-Tabletop Electric Stationary Lift Tables

Bellows

An extra-large tabletop provides plenty of room for oversized loads. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables															Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Elevation Speed, in./sec.	Tabletop Ga.	Material	Duty Cycle	Motor Full Load Current	Plug Type	Power Cord Lg., ft.	Control Cord Lg., ft.	Specifications Met		Each		Each
With 120V AC Motor
2,000	96"	48"	6 1/2"-42 1/2"	3/4	7	Steel	12 cycles per hour	8.4A	Three Prong	10	10	ANSI MH 29.1, NEMA 1	0000000	000000000	0000000	000000000
6,000	96"	48"	8"-44"	1/2	7	Steel	12 cycles per hour	8.4A	Three Prong	10	10	ANSI MH 29.1, NEMA 1	0000000	000000000	0000000	00000000

Stationary Air-Lift Tables

Bellows

Tables come ready to operate with no hydraulics, motors, or pumps to maintain and no electrical connection required. These tables connect to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables													Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Tabletop Ga.	Material	Air Pressure, psi	Flow Rate	Air Inlet Pipe Size	Air Inlet Thread Type	Air Inlet Gender		Each		Each
2,000	48"	48"	8"-32"	3	Steel	80	15 cfm @ 80 psi	1/4	NPT	Female	00000000	000000000	0000000	0000000
4,000	48"	48"	8"-32"	3	Steel	80	15 cfm @ 80 psi	1/4	NPT	Female	00000000	00000000	0000000	000000

Design-Your-Own Stationary Air-Lift Tables

Choose your table based on capacity, then choose the type of control that best suit your application. You'll also need a tabletop. No hydraulics, motors, or pumps to maintain and no electrical connection required, just connect these tables to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Frame

Frame

Bellows

Capacity, lbs.	Lg.	Wd.	Ht.	Frame Ga.	Material	Air Pressure, psi	Flow Rate	Air Inlet Pipe Size	Air Inlet Thread Type	Air Inlet Gender		Each
1,000	35 1/2"	47"	7"-32"	3	Steel	80	15 cfm @ 80 psi	1/2	NPT	Female	000000	000000000
2,000	35 1/2"	47"	7"-32"	3	Steel	80	15 cfm @ 80 psi	1/2	NPT	Female	000000	00000000
3,000	35 1/2"	47"	7"-32"	3	Steel	80	15 cfm @ 80 psi	1/2	NPT	Female	000000	00000000

Lift Table Bellows

000000

Each

0000000

Tabletop

Lg.	Wd.	Thick.	Material		Each
36"	48"	1/4"	Steel	000000	0000000

Foot-Operated Stationary Lift Tables

Bellows

Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.

Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.

Warning: Never use to lift people.

Lift Tables										Lift Table Bellows
Capacity, lbs.	Lg.	Wd.	Ht.	Elevation per Stroke	Tabletop Ga.	Material	Specifications Met		Each		Each
440	25 1/2"	19 1/2"	5"-21"	1/2"	13	Steel	ANSI MH 29.1	0000000	000000000	0000000	0000000
550	32"	19 1/2"	5"-28"	1/2"	13	Steel	ANSI MH 29.1	0000000	00000000	0000000	000000
660	40"	20"	9 1/2"-54"	3/4"	10	Steel	ANSI MH 29.1	0000000	00000000	0000000	00000000
1,100	40"	20"	6"-31 1/2"	1/2"	10	Steel	ANSI MH 29.1	0000000	00000000	0000000	000000
1,650	40"	20"	6"-31 1/2"	3/8"	10	Steel	ANSI MH 29.1	0000000	00000000	0000000	000000

Terms and Conditions and Privacy Policy