Protect equipment while limiting environmental impact. These multipurpose lubricants quickly break down in water. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect equipment.

Formulated to handle high loads and temperatures, these multipurpose lubricants are NSF registered H1 for incidental food contact. Use them in high-pressure applications, such as gears, hinges, ovens, and dryers.

These lubricants foam when applied, so they don’t drip while sinking into roller chain and other moving metal parts. They dry to form a film that prevents dust, dirt, and corrosion.

For use in food-processing and preparation areas, use these lubricants to cut through dirt, grease, and rust, and to protect chain and other moving metal parts.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

For use in food-processing and preparation areas, this grease is rated for incidental contact with food.

A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment.

This grease performs well in a wide range of bearing types.

Lubricate the ball and roller bearings that support your highest loads, such as wheels and heavy equipment.

Lubricate ball and roller bearings for high-load applications in wet environments, such as water processing, steel mills, and mining.

Tackier than gear box grease, this grease sticks to open gears and roller chain.

Made with moisture-resistant aluminum thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. It is NSF registered H1 for incidental food contact.

Also known as damping grease, apply this grease where precision adjustment is required. It limits speed for smooth, exact movement.

This grease stands up to the high speeds typically found in automated applications.

Formulated for use on soft metal, such as aluminum, copper, and brass, these lubricants won’t stain. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

A high sulfur concentration provides the lubricity required to protect tools and stainless steel work surfaces, but these lubricants will stain other metal. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier.

For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used for shallow drilling, reaming, and tapping, as well as on saw blades.

Use these lubricants with magnetic-base drill presses to cool machining cycles, improving workpiece surface finishes and extending tool life.

Remove heat from long machining cycles with hard metal. These coolants prevent workpiece corrosion and distortion to improve cutting accuracy.

Use this oil in food-processing and preparation areas.

Thin enough to penetrate inside chain pins and links, yet tacky so it stays in place, use this oil to lubricate chain and roller chain.

For use in worm gears, this oil stands up to high pressure. Use it in food-processing and preparation areas where incidental contact with food is possible.

Mix these treatments with gasoline or oil to improve engine performance.

This stabilizer contains nano-sized additives, which penetrate small surface imperfections to reduce wear and heat, extending the life of both the oil and the engine while improving performance.

Increase the pressure mineral oil can withstand in low-speed, high-pressure applications, such as gears, plain bearings, and ways.

For use in food-processing and preparation areas, this oil is NSF registered H1 for incidental food contact.

Primarily for use in automotive applications, this oil also works well with most machinery.

Use this oil where zinc compatibility or environmental issues are a concern.

For use in food-processing and preparation areas, this oil is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental food contact.

For long-lasting lubrication in vacuum pumps, this oil is slow to evaporate.

Keep air-powered tools running longer. This oil prevents corrosion and has wear-resistant and extreme-pressure properties. It absorbs water to reduce condensation and prevent buildup.

Made with graphite and nickel, these lubricants can be used in environments with extreme heat and harsh chemicals where antiseize lubricants with copper can't. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Often used with engine bolts and heavily-loaded, slow-moving gears, these lubricants are formulated with moly (molybdenum disulfide) to prevent parts from locking together under high loads and pressure.

These corrosion-resistant lubricants come with a traceable lot number and material report. The addition of nickel prevents dissimilar metals, such as brass and steel, from locking together.

Easy to apply and mess-free, this tape won't run or rub off of threaded connections. Made with PTFE for excellent lubricity, it prevents threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Keep cylinder hones clean.