About Threaded Studs and Rods
More
About Lifting with Hoist Rings
More
About Nuts, Materials, and Finishes
More
About Hex Head Screws and Bolts
More
Steel Heavy Hex Head Screws for High-Pressure Applications
These Grade B7 steel screws are nearly twice as strong as our stainless steel screws for high-pressure applications. Also known as pressure bolts, they meet the high-pressure and high-temperature regulations of ASTM A193 and are used to secure pressure tanks, valves, and flanges. Length is measured from under the head. Screws should be used with ASTM A194 nuts.
Partially threaded screws come with precise threaded and unthreaded portions, allowing you to place only the stronger unthreaded portion (grip) in joints subjected to sideways forces.
For technical drawings and 3-D models, click on a part number.
Screws | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Steel Hex Nuts | ||||||||||||
Lg. | Threading | Thread Spacing | Thread Lg. | Grip Lg. | Wd. | Ht. | Tensile Strength, psi | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
ASTM Grade B7 Steel | |||||||||||||
1 1/8"-8 | |||||||||||||
2 1/2" | Fully Threaded | Fine | __ | __ | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 000000 | 1 | 000000000 | 00000 |
2 3/4" | Fully Threaded | Fine | __ | __ | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
3" | Fully Threaded | Fine | __ | __ | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
3 1/4" | Fully Threaded | Fine | __ | __ | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
3 1/2" | Fully Threaded | Fine | __ | __ | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
4" | Partially Threaded | Fine | 2 1/2" | 1 1/2" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
4 1/4" | Partially Threaded | Fine | 2 1/2" | 1 3/4" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
4 1/2" | Partially Threaded | Fine | 2 1/2" | 2" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
4 3/4" | Partially Threaded | Fine | 2 1/2" | 2 1/4" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
5" | Partially Threaded | Fine | 2 1/2" | 2 1/2" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
5 1/2" | Partially Threaded | Fine | 2 1/2" | 3" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
6" | Partially Threaded | Fine | 2 1/2" | 3 1/2" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
6 1/2" | Partially Threaded | Fine | 2 3/4" | 3 3/4" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
7" | Partially Threaded | Fine | 2 3/4" | 4 1/4" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
8" | Partially Threaded | Fine | 2 3/4" | 5 1/4" | 1 13/16" | 11/16" | 125,000 | ASTM A193 | 000000000 | 00000 | 1 | 000000000 | 0000 |
Medium-Strength Steel Threaded Rods—Grade B7
Grade B7, these threaded rods have a tensile strength about one and a half times stronger than low-strength steel rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
For technical drawings and 3-D models, click on a part number.
Lg. | Tensile Strength, psi | Hardness | Specifications Met | Each | |
1 1/8"-8 | |||||
---|---|---|---|---|---|
5" | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 00000 |
6" | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 0000 |
7" | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 00000 |
8" | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 00000 |
1ft. | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 00000 |
3ft. | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 00000 |
6ft. | 125,000 | Rockwell C35 | ASTM A193 | 000000000 | 000000 |
Rotating Eyebolts—For Lifting
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | |||||||
---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | Vertical Capacity, lbs. | Color | Each | |
Powder-Coated Steel | ||||||||
1 1/8"-8 | 1 13/32" | 1 13/32" | 5" | 1 29/32" | 7,050 | Pink | 00000000 | 0000000 |
Hoist Rings—For Lifting
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel hoist rings have mild corrosion resistance.
Hoist rings that are CE marked meet European safety standards.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Machined Black-Oxide Steel | ||||||||
---|---|---|---|---|---|---|---|---|
1 1/8"-8 | 2 5/16" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 0000000 |