About Rounded Head Screws
More
About Flat Head Screws
More
18-8 Stainless Steel Narrow Cheese Head Slotted Screws
More corrosion resistant than steel, and almost as strong, these 18-8 stainless steel screws have a narrower head than pan head screws to fit into tight spaces. They’re often used in electrical panels and next to flanges and raised surfaces in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals. A deep slot gives you more driving power and keeps the screwdriver from slipping. Length is measured from under the head.
Passivated screws are finished with an extra layer of rust protection.
ISO 1207 (formerly DIN 84), DIN 920, and DIN 922 screws meet international standards for fastener dimensions.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Threading | Head Dia., mm | Head Ht., mm | Finish | Tensile Strength, psi  | Specifications Met | Pkg. Qty. | Pkg. | |
Flat Tip—18-8 Stainless Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
M1.2 × 0.25 mm | |||||||||
| 2 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 000000 |
| 3 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 0000 |
| 4 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 00000 |
| 5 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 00000 |
| 6 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 00000 |
| 8 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 10 | 000000000 | 00000 |
| 10 | Fully Threaded | 2.30 | 0.80 | Passivated | 70,000 | DIN 84, ISO 1207 | 5 | 000000000 | 0000 |
Metric 18-8 Stainless Steel Slotted Flat Head Screws
These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. All are passivated for added protection against oxidation and corrosion. They’re angled under the head to sit flush within countersunk holes. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.