System of Measurement System of Measurement |
---|
|
Capacity Capacity | Show |
---|
|
Capacity Capacity | Hide |
---|
Lid Type Lid Type |
---|
|
Mouth ID Mouth ID |
---|
|
|
|
Lid Color Lid Color |
---|
![]() | Semi- Clear | ![]() | White |
![]() | Black | ![]() | Green |
![]() | Clear | ||
Maximum Temperature Maximum Temperature |
---|
|
Clarity Clarity |
---|
|
Height Height |
---|
|
|
|
Finish Finish |
---|
|
These sprayers are small enough to spray with one hand. Pump the sprayer to pressurize, then squeeze the trigger. They are often used with degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, nozzle and pump are suitable for your application.
Cap., oz. | Dia. | Ht. | Tank Material | Seal Material | Nozzle Material | Pump Material | Color | Fill Opening Dia. | Graduation Marks | Features | Each | ||
Mist/Stream Dispensing | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | 64 | 8" | 11 1/4" | Polypropylene Plastic | Buna-N Rubber | Polypropylene Plastic | Polypropylene Plastic | Semi-Clear | 1 3/4" | 1/2 pt. 0.5 L | On/Off Thumb Control | 00000000 | 000000 |
Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids. Not for use with fuels or solvents.
Containers and lids are all interchangeable.
Cap. | Dia. | Ht. | Mouth OD | Graduation Marks | Material | Color | Max. Temp., °F | Each | |
64 oz. | 6 5/8" | 8 3/4" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 000000 |
Dispense flammable liquids with these FM-approved push-top dispensers. Excess liquid drains back into the dispenser through a mesh flame-arrester plate.
Style D has thick walls, so it’s more durable than other bottles.
Mouth | Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
LDPE Plastic | ||||||||||||
64 oz. / 1,900 ml | 4 1/2" | 11" | 1 1/2" | 1" | Semi-Clear | Threaded | LDPE Plastic | Semi-Clear | No | 175° | 000000 | 000000 |
Mouth | Lid | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Wd. | Dp. | Ht. | OD | ID | Grad. Marks | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
64 oz. / 1,900 ml | 4 1/2" | 4 1/2" | 10 5/8" | 2 1/8" | 1 1/2" | 100 ml | Clear | Threaded | HDPE Plastic | White | No | 155° | 0000000 | 000000 |
Mouth | Lid | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Wd. | Dp. | Ht. | OD | ID | Grad. Marks | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
64 oz. / 1,900 ml | 5" | 3 3/4" | 9 3/4" | 2 1/4" | 1 15/16" | 8 oz., 200 ml | Semi-Clear | Tight Fitting | Polypropylene Plastic | White | Yes | 160° | 0000000 | 00000 |
These bottles are fluorinated to resist absorption of contents.
Mouth | Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
HDPE Plastic | ||||||||||||
64 oz. / 1,900 ml | 4 3/4" | 9 7/8" | 1 1/2" | 1 1/16" | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | No | 245° | 0000000 | 000000 |
Styles C, S, and T have durable, thick walls.
Mouth | Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
HDPE Plastic | ||||||||||||
64 oz. / 1,900 ml | 4 3/4" | 9 5/8" | 2 1/2" | 2 1/8" | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | No | 245° | 0000000 | 000000 |
Polypropylene Plastic | ||||||||||||
64 oz. / 1,900 ml | 4 3/4" | 9 5/8" | 2 1/2" | 2 1/8" | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | Yes | 275° | 0000000 | 00000 |
Mouth | Lid | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht | OD | ID | Color | Type | Material | Color | Seal Material | Autoclavable | Max. Temp., °F | Each | |
Polycarbonate Plastic | |||||||||||||
64 oz. / 1,900 ml | 5" | 9 3/8" | 2 3/4" | 2 3/8" | Clear | Threaded | Polypropylene Plastic | Black | Buna-N Rubber | No | 225° | 000000 | 000000 |
Mouth | Lid | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Wd. | Dp. | Ht | OD | ID | Color | Type | Material | Color | Seal Material | Autoclavable | Max. Temp., °F | Each | |
PVC Plastic | ||||||||||||||
64 oz. / 1,900 ml | 4 5/8" | 4 5/8" | 7 1/2" | 2 7/8" | 2 5/8" | Clear | Threaded | Phenolic Plastic | Black | Coated Paper | No | 175° | 00000000 | 000000 |
Mouth | Lid | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Wd. | Dp. | Ht | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
HDPE Plastic | |||||||||||||
64 oz. / 1,900 ml | 6" | 3 3/8" | 9 1/2" | 2 1/2" | 2" | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | No | 245° | 0000000 | 000000 |
Mouth | Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
HDPE Plastic | ||||||||||||
64 oz. / 1,900 ml | 5 7/8" | 6 1/4" | 4 3/4" | 4" | Semi-Clear | Threaded | Polypropylene Plastic | White | No | 230° | 0000000 | 00000 |
Mouth | Lid | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht | OD | ID | Color | Type | Material | Color | Seal Material | Autoclavable | Max. Temp., °F | Each | |
Polypropylene Plastic | |||||||||||||
64 oz. / 1,900 ml | 5" | 8 3/8" | 2 3/4" | 2 1/4" | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | Silicone Rubber | Yes | 275° | 000000 | 000000 |
Styles A and B have a perforated lip for attaching a tag.
Capacity | Mouth | Lid | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
oz. | ml | Dia. | Ht. | OD | ID | Grad. Marks | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
LDPE Plastic | ||||||||||||||
64 | 1,900 | 4 3/4" | 9 3/4" | 2 1/2" | 2 3/16" | 100 ml | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | No | 175° | 0000000 | 000000 |
Capacity | Mouth | Lid | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
oz. | ml | Wd. | Dp. | Ht. | OD | ID | Grad. Marks | Color | Type | Material | Color | Seal Material | Autoclavable | Max. Temp., °F | Each | |
HDPE Plastic | ||||||||||||||||
64 | 1,900 | 4" | 5 1/4" | 8 1/4" | 2 1/2" | 2 5/16" | 100 ml | Semi-Clear | Threaded | Polypropylene Plastic | Semi-Clear | LDPE Plastic | No | 230° | 00000000 | 000000 |
These jars are fluorinated to resist the absorption of contents.
Capacity | Mouth | Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
oz. | ml | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
HDPE Plastic | |||||||||||||
64 | 1,900 | 4 3/4" | 9 5/8" | 3 7/8" | 3 1/2" | Semi-Clear | Threaded | Polypropylene Plastic | White | No | 245° | 00000000 | 000000 |
Jars with PTFE seals are more chemical resistant than jars with coated paper seals.
Capacity | Mouth | Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
oz. | ml | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., °F | Each | |
Coated Paper Seal | |||||||||||||
Soda-Lime Glass | |||||||||||||
64 | 1,900 | 4 1/4" | 8 1/2" | 3 1/4" | 2 3/4" | Clear | Threaded | Phenolic Plastic | Black | No | Not Rated | 0000000 | 000000 |
PTFE Plastic Seal | |||||||||||||
Soda-Lime Glass | |||||||||||||
64 | 1,900 | 4 1/4" | 8 3/8" | 3 1/4" | 2 3/4" | Clear | Threaded | Phenolic Plastic | Green | No | Not Rated | 0000000 | 00000 |
Also known as mason jars, these have a tin-plated lid that forms a vacuum seal when heated.
Amber jars are good for light-sensitive contents.
Capacity | Mouth | Lid | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
oz. | ml | Dia. | Ht. | OD | ID | Grad. Marks | Color | Type | Material | Seal Material | Autoclavable | Max. Temp., °F | Pkg. Qty. | Pkg. | |
Soda-Lime Glass | |||||||||||||||
64 | 1,900 | 4 1/2" | 9 1/4" | 3 3/8" | 2 15/16" | 1/2 pt., 250 ml | Clear | Threaded | Tin-Plated Steel | HDPE Plastic | No | 240° | 6 | 0000000 | 000000 |
Capacity | Mouth | Lid | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
oz. | ml | Dia. | Ht. | OD | ID | Grad. Marks | Color | Type | Material | Seal Material | Autoclavable | Max. Temp., °F | Pkg. Qty. | Pkg. | |
Soda-Lime Glass | |||||||||||||||
64 | 1,900 | 4 1/2" | 9 1/4" | 3 3/8" | 2 15/16" | 1/2 pt., 250 ml | Amber | Threaded | Tin-Plated Steel | HDPE Plastic | No | 240° | 2 | 0000000 | 000000 |
Style G are tin-plated steel and are used to store oils and other solvents that can’t be stored in plastic.
Mouth | Lid | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Seal Material | Autoclavable | Max. Temp., °F | Each | |
Soda-Lime Glass | |||||||||||||
64 oz. | 5" | 10 1/2" | 1 1/2" | 1" | Clear | Threaded | Phenolic Plastic | Black | PTFE Plastic | No | 175° | 0000000 | 000000 |
Mouth | Lid | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Wd. | Dp. | Ht. | OD | ID | Type | Material | Seal Material | Autoclavable | Each | |
Tin-Plated Steel | |||||||||||
64 oz. | 5 1/4" | 3 1/2" | 7 3/4" | 1 1/4" | 15/16" | Threaded | Tin-Plated Steel | Coated Paper | No | 0000000 | 00000 |
Often used in break rooms and cafeterias, these dispensers make it easy to serve beverages to a few people or a crowd.
Styles C and D are for cold beverages. They meet NSF/ANSI standards.
Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap. | Dia. | Ht. | Material | Color | Type | Material | Color | Specifications Met | Each | |
C | 64 oz. | 5 1/2" | 9 3/4" | Plastic | Clear | Loose Fitting | Plastic | Clear | NSF/ANSI 2 | 000000 | 000000 |
Organize bottles of various shapes and sizes.
Screw mount holders fasten to the wall with screws.
Holders for bottles up to 3 3/4" dia. hold water bottles, spray bottles, and aerosol cans.
For technical drawings and 3-D models, click on a part number.