Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

Mounted on a tripod, these lights stand higher for greater visibility than other strobe lights.

Screw into a standard medium-base light socket.

These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

These lights cycle through three different flashing patterns.

These lights cycle through three different flashing patterns.

Quickly position these portable flashing lights using the magnetic base to draw attention to hazards in areas such as docks and railroad crossings. They are battery operated, so they do not need to be wired or plugged in.

These lights can switch between continuous, flashing, or revolving.

Carry these lights around with you and place them wherever needed. They can switch between being continuous or flashing.

Make a custom panel light with your choice of light and lens cap color.

You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

The buzzer warns workers of hazards even when they’re outside a direct line of sight.

Lights combine high-visibility strobes with a buzzer that warns workers of hazards even when they’re outside a direct line of sight.

The revolving motion of the light makes these more visible than flashing lights.

These make great doorbells when used with a push button.

When water contacts the sensor, it triggers a buzzer to alert personnel to a leak or overflow hazard. Frequently used to monitor sinks, pipe lines, tubs, and sump pumps.

Buzzers are UL listed for use in environments where flammable gases, combustible dust, and combustible fibers may be present.

Apply air or steam pressure to produce a shrill tone and alert workers. Signal continues as long as pressure is applied.

Horns are UL and C-UL listed for indoor and outdoor use in Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Division 2 hazardous locations.

Sirens can emit both continuous and pulse tones—pulse tones alternate on/off to draw greater attention than continuous tones.

These horns have disposable canisters that can be replaced when the propellant is gone.

Arm and disarm these alarms with a key.

Arm and disarm these alarms with a programmable code.

Just like the bells you hear at service stations, these bells ring when a vehicle drives over the attached hose.

A chime announces when someone passes through the infrared light beam and a counter keeps track of each entrance and exit.

Mount the M22 male thread on the bottom of the light through a hole and then secure using the included nut.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens.

Choose from seven colors, including nontraditional colors such as magenta and turquoise, for a custom four-light stack light.

These lights emit three colors from a single lens and can be mounted in tight spaces where a tower will not fit.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

Get notified about equipment issues even when you aren't around your machines. These lights connect to your computer via Ethernet, allowing you to set up email alerts when there is a problem with a machine, server, or conveyor.