Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

These receptacles are for light-duty use.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Charge mobile devices without an adapter.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Prevent damage to electronic equipment caused by spikes in voltage.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Attach these general purpose receptacles to DIN rail to bring power closer to where you need it.

Also known as hospital-grade receptacles, these have an extra-tight fit when mated to withstand high vibration. They prevent damage to electronic equipment caused by spikes in current. Mount to DIN rail.

Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch.

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

Protect screw-together M12 connectors when not in use.

Protect harsh environment M12 connectors when not in use.

Plug these connectors into hazardous location devices. Using a NAMUR signal, they operate at a low current and voltage, so they prevent the risk of sparks and ignition in volatile areas.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Protect mini connectors when not in use.

These connectors withstand corrosion and abrasion. They're often used with 18 mm and 30 mm proximity switches and limit switches.

Join two connectors that both have internal threads.

Rated IP69K, these M16 connectors protect against dust, debris, and hot, high-pressure jets of water at high volumes.

The largest signal/power connectors we offer, these are often used with conveyors, cooling fans, and grinders.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

Push these connectors together to quickly create signal and data connections in tight spaces. All are smaller than M5 and M8 connectors. They also need less space to mate than screw-together connectors, which require two hands to twist them in place.

Join M8 connections to M12 connections.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

Protect connections while maintaining access. The base and hood latch together securely yet can be quickly detached for equipment repair or replacement.

Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.

Carry up to four times the current of standard Compact Latching Connectors. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Caps are watertight to protect safe-break plugs when not in use.

Caps are watertight to protect hazardous location safe-break plugs when not in use.

Protect Mil. Spec. connectors when not in use.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Protect high-current connectors when not in use.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.

Stack as many connectors on top of each other as needed—the housings clamp together to form a secure attachment.

Choose a socket that works with your Siemens servomotor system.

Use these connectors in vehicles and other agricultural and construction equipment. They have a sealed nylon housing that resists dust and temporary submersion.

Each set includes one plug and one socket. These connectors withstand moisture, harsh engine fluids, and high temperatures. Also known as weather-pack connectors.

Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.

Connectors lock into place for a secure connection in high-vibration environments. They power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Each set includes one male plug and one female socket that withstands the high temperatures and high current found in welding applications.