Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface.

The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

Pair a body with two faces of different materials to create the perfect striking tool. Use mallets to drive chisels and strike work without damaging its surface.

Match a mallet body with different face materials to create the perfect striking tool. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use mallets to drive chisels and strike work without damaging its surface.

The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. All are suitable for driving chisels and striking work without damaging its surface.

The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use them to drive and remove nails.

Strike work in tight spaces where standard hammers don't have room to swing. The steel face on these hammers is hard enough to demolish material and drive pins, punches, and masonry drills.

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. A fluorescent orange color makes them easy to see. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.

Drive nails with the flat, steel face and remove them with the claw on the other end of the head.

These palm-sized tools fit in tight spaces and use air to deliver a powerful strike where swinging a hammer is not possible. Replace faces when they are worn, or switch to a face with a different material or hardness.

Also known as upholstery and pin hammers, these tools have a small head for driving tacks and pins in confined areas.

Similar to a sledge hammer but with a longer, slimmer head, these tools are used to drive spikes or punch out pins. They're also known as spike mauls.

Also known as jeweler's hammers, these have smooth steel faces for precise forming and finishing work on delicate metal workpieces.

Pry, shape, chip, and cut masonry and stone.

Match the handle to the head opening size and shape of your tool. Insert the handle into the opening and use the included wedges to secure it.

Extend the life of your hammer's handle by preventing it from cracking if you swing and miss. These protectors cushion just below the head where most wear occurs.