Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

These sockets fit the nuts found on water and gas valves.

Grip the indentations around the outside of tri-groove fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

Turn the knob to adjust the jaws and fit a range of fastener sizes.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

A rubber insert grips the plug to prevent damage.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra length allows access to fasteners on long bolts.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Lock your socket into the extension to prevent accidental disengagement..

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

These sockets are made to withstand the high torque and force of impact tools.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Lock your socket into the extension to prevent accidental disengagement.

The handle is covered in rubber for a comfortable grip.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

The shaft on these wrenches extends and locks.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

No need to pull the socket off the tool—push a button to release.

Bolts and threaded rod pass through these wrenches when used with bolt-through sockets.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Pivot the head for access to fasteners in tight spots.

The L shape provides clearance when reaching over obstructions.

Bend around obstructions to turn hard-to-reach fasteners.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Trust the precision of your measurements—these wrenches are accurate to ±2%.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Turn sockets from above when there's not room to swing a standard wrench handle.

Anchor these multipliers for added stability.

These tools are suitable for general shop, maintenance, and automotive work.

Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.