Mount Type Mount Type |
---|
![]() | Adhesive |
System of Measurement System of Measurement |
---|
|
Color Color | Show |
---|
![]() | Semi-Clear |
Color Color | Hide |
---|
Spring Type Spring Type |
---|
![]() | Die |
Rate Rate |
---|
Maximum Load Maximum Load |
---|
|
Hardness Rating Hardness Rating |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Deflection @ Maximum Load Deflection @ Maximum Load |
---|
|
Profile Profile |
---|
![]() | Flat |
Flexibility Flexibility |
---|
![]() | Very Flexible |
Nonmarking Nonmarking |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
More
With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant. All of this trim has a hard rating to withstand high levels of impact. It's also nonmarking.
Very flexible trim can be bent around tight corners.
Adhesive-back trim allows for easy installation. Made of UHMW and PEEK, it has good wear resistance.
For technical drawings and 3-D models, click on a part number.
Outside | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Length, ft. | Each | |
UHMW Plastic | ||||||||||
1/2" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 15 | 0000000 | 00000 |
1" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 15 | 0000000 | 00000 |
2" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 15 | 0000000 | 00000 |
6" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 3 | 0000000 | 00000 |
12" | 0.022" | Very Flexible | Hard | 0° to 120° | No | Yes | Semi-Clear | 3 | 0000000 | 00000 |
A quieter, more vibration-resistant alternative to traditional steel die springs, these polyurethane springs resist oxidation, oil, and abrasion in high-load, high-pressure applications.
Deflection is the distance the spring compresses, expressed as a percentage of its length.
As you squeeze a die spring, it gets harder to push. Rate is the amount of force required for every inch of compression. The higher the rate, the harder it is to compress the spring.
For technical drawings and 3-D models, click on a part number.
Lg. | Compressed Lg. @ Max. Load | Deflection @ Max. Load | Max. Load, lbs. | Rate, lbs./in. | Material | Hardness | Temperature Range, °F | Each | |
For 11/16" Hole Dia. (For 3/16" Shaft Dia.) | |||||||||
---|---|---|---|---|---|---|---|---|---|
1" | 0.85" | 15% | 470 | 1,880 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 00000 |
1.25" | 1.06" | 15% | 365 | 1,460 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
1.5" | 1.28" | 15% | 315 | 1,260 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
For 3/4" Hole Dia. (For 1/4" Shaft Dia.) | |||||||||
1" | 0.85" | 15% | 555 | 2,220 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
1.25" | 1.06" | 15% | 425 | 1,700 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
1.5" | 1.28" | 15% | 365 | 1,460 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
For 7/8" Hole Dia. (For 3/8" Shaft Dia.) | |||||||||
1" | 0.85" | 15% | 755 | 3,020 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
1.25" | 1.06" | 15% | 590 | 2,360 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
1.5" | 1.28" | 15% | 475 | 1,900 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 000000 | 0000 |
2" | 1.7" | 15% | 340 | 1,360 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
For 1" Hole Dia. (For 1/2" Shaft Dia.) | |||||||||
1" | 0.85" | 15% | 875 | 3,500 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
1.25" | 1.06" | 15% | 580 | 2,320 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
1.5" | 1.28" | 15% | 555 | 2,220 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
2" | 1.7" | 15% | 425 | 1,700 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
For 1 3/8" Hole Dia. (For 3/4" Shaft Dia.) | |||||||||
1.25" | 1.06" | 15% | 1,280 | 5,120 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
1.5" | 1.28" | 15% | 1,100 | 4,400 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
2" | 1.7" | 15% | 820 | 3,280 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
For 1 3/4" Hole Dia. (For 1" Shaft Dia.) | |||||||||
1.25" | 1.06" | 15% | 1,940 | 7,760 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
1.5" | 1.28" | 15% | 1,605 | 6,420 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 0000 |
2" | 1.7" | 15% | 1,175 | 4,700 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 00000 |
2.5" | 2.13" | 15% | 935 | 3,740 | Polyurethane Rubber | Durometer 95A | -50 to 180° F | 0000000 | 00000 |