Width Width |
---|
|
|
|
Shape Shape |
---|
![]() | ![]() |
Sheet and Bar | Film |
Hardness Rating Hardness Rating |
---|
|
Component Component |
---|
|
Tensile Strength Tensile Strength |
---|
|
Performance Properties Performance Properties |
---|
|
More
More
More
More
There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required. This vinyl-coated polyester foam has closed-cell construction, which restricts water, air, and gases from being absorbed. Sheets are washable and moisture and bacteria resistant.
Protect drawer beds and tools from scratches and dents.
Wd. | Thick. | Material | Color | Surface Construction | Max. Lg., ft. | Per Ft. | |
24" | 1/8" | Plastic | Black | Smooth | 100 | 0000000 | 00000 |
Not only will these liners protect your tools from scratches and dents, they’re treated to also protect against rust.
Wd. | Thick. | Material | Color | Surface Construction | Max. Lg., ft. | Per Ft. | |
40" | 3/32" | Plastic | Black | Ribbed | 30 | 0000000 | 000000 |
Line toolboxes and drawers to cushion and protect small parts.
Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts. Cut the liner to fit any size drawer.
The cutting guide allows you to cut a straight edge with a utility knife.
Wd. | Dp. | Thick. | Material | Color | Each | |
17 3/4" | 36 5/8" | 1/32" | Plastic | Black | 0000000 | 000000 |
Wd. | Dp. | Ht. | Thick. | Material | Color | Each | |
2 3/8" | 2 3/8" | 2" | 1/16" | Plastic | Black | 0000000 | 00000 |
3 1/2" | 2 3/8" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
3 1/2" | 3 1/2" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
4 5/8" | 3 1/2" | 1 7/8" | 1/16" | Plastic | Black | 0000000 | 0000 |
4 5/8" | 4 5/8" | 1 7/8" | 1/16" | Plastic | Black | 0000000 | 0000 |
4 3/4" | 2 3/8" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
7 1/8" | 3 1/2" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
9 1/2" | 3 1/2" | 2" | 1/16" | Plastic | Black | 0000000 | 0000 |
Material | Color | Each | |
Plastic | Red | 0000000 | 00000 |
Add these mats to workstations, walkways, and shelves in your sanitary facility for a cushioned, slip-resistant surface. They’re also called ergonomic mats. They have metal and chemical additives, so if part of the mat gets into your line, it’ll set off metal detectors and show up on X-rays. These mats help you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility. They’re also FDA compliant for direct contact with food.
Surface projections on both sides of these mats cushion hard floors and reduce the strain of standing for long periods. They also add traction so you don’t slip. In addition to work areas, they’re often used to line shelves and utility carts. The projections are spread out to let air and liquids flow through, so bacteria doesn’t grow in between them.
Made from EPDM rubber, these mats are durable and hold up to abrasion. They won’t break down from frequent washdowns with water, cleaners, and harsh sanitizers. Use different colors in different areas of your facility to reduce the risk of cross-contamination. Each side is a different color to make sure that you always use the same side for food contact. Color coding is often used to help plants follow Good Manufacturing Practices (GMPs).
Width | Length | Thickness | Mat Hardness | Material | Edge Profile | For Use Outdoors | Specifications Met | Color | Each | |
Projections | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
21" | 27" | 5/8" | Firm | EPDM Rubber | Flat | Yes | FDA Compliant 21 CFR 177.2600 | Blue/Black | 0000000 | 000000 |
21" | 27" | 5/8" | Firm | EPDM Rubber | Flat | Yes | FDA Compliant 21 CFR 177.2600 | Red/Black | 0000000 | 00000 |
21" | 27" | 5/8" | Firm | EPDM Rubber | Flat | Yes | FDA Compliant 21 CFR 177.2600 | White/Black | 0000000 | 00000 |
21" | 27" | 5/8" | Firm | EPDM Rubber | Flat | Yes | FDA Compliant 21 CFR 177.2600 | Yellow/Black | 0000000 | 00000 |
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Wd. | Overall Thick. | Material | Adhesive Type | Temp. Range, °F | Each | |
15 ft. | ||||||
---|---|---|---|---|---|---|
White—FEP Plastic | ||||||
1" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
2" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 00000 |
4" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 00000 |
25" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
108 ft. | ||||||
White—FEP Plastic | ||||||
1" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
2" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
4" | 0.01" | Vinyl Plastic | Acrylic | -20° to 200° | 00000000 | 000000 |
A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment. It is also known as PET and PETE.
Widely used as packaging, this polyester film absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.