Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Also known as open wedge sockets, these end fittings require only a torque wrench to install.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The pins have flush ends to prevent snagging and accidental disengagement.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

The wide end of these links has more room for attachments than standard figure-eight links.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

These have a removable half-link to attach large rings, links, and other closed fittings.

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

Screw these hooks into place and secure with the included nut.

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Prevent accidental release and keep the tip from snagging.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

These slings attach quickly and securely to loads with lift attachments.

Hang these pulleys from hooks, screws, and bolts.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.