These rings fit around the entire can, offering a tighter lock than clips.

Also known as Type I safety cans, these have a single opening for both filling and pouring.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring.

Carry and store petroleum-based liquids in these sturdy cans.

A galvanized finish protects these waste containers from rust.

Open these plastic waste containers with your foot to discard trash without touching the lid.

Add these 7" tall waste containers to tables, shelves, and small spaces.

Mount these containers to the wall to avoid using valuable floor space.

Shipped flat so you can keep plenty of extras on hand, these cardboard containers have a self-locking base for fast assembly.

Keep outdoor smoking areas tidy with these weather-resistant containers. The narrow neck restricts oxygen flow to extinguish internal fires, while the broad base provides stability.

Safely dispose of used light bulbs by recycling them. Containers include a paid shipping label to send the bulbs to a recycling facility.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.

These containers are marked with a recycling symbol to distinguish them from waste containers.

Fill these containers with your dead batteries, then attach the included paid shipping label to send them to a recycling facility.

Fill these containers with up to 25 lbs. of disposable masks to prevent cross-contamination in your facility, then seal and send them to a recycling facility with the pre-paid shipping label.

Made of plastic to resist harsh acids and corrosives, these safety cans have a self-closing cap to prevent spills and a trigger handle to empty contents with one hand.

Dispose of needles, razor blades, and other sharp objects with these sealable containers. They are also known as sharps containers and are puncture resistant.

Insert scalpel and then press the button to remove the blade.

Safely dispose of static-charged waste. When placed on a grounded floor, these containers drain static charges from the waste into the floor.

Store, pour, and carry up to 1 gallon.

Flatten these carboys for convenient storage.

Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.

The open top makes these easier to fill than jugs, while the spout gives more control when pouring.

Also known as milk cans, these have a narrow mouth for controlled pouring.

These plastic batch cans meet NSF/ANSI 2 sanitary standards for food environments.

A threaded opening 4" from the bottom allows you to drain a drum without moving it.

These drums are seamless, making them more durable than other plastic drums.

A plastic liner and lid allow these drums to be used with wet and dry materials.

These drums are corrosion resistant and are UN-compliant for shipping.

Clamp lids onto sanitary stainless steel drums using these leverlock closing rings, which create a tight seal and are easy to put on and take off.

Seal lids onto sanitary drums. These silicone seals are FDA compliant for direct contact with food.

Tubs are made of galvanized steel for corrosion resistance.

These 300 series stainless steel pails meet NSF/ANSI standards and are commonly used in food-processing applications.

This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.

The bottom of these tanks is sloped to ensure easy and complete drainage.

Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.

These sprayers are small enough to use with one hand.

Carry these sprayers comfortably on your back using the padded shoulder straps.

These hand-held sprayers give a positive charge to liquid disinfectant, causing it to wrap around and cling to all surfaces it touches for an even coat.

Wheel these electric-powered sprayers wherever needed to disinfect surfaces and equipment in bathrooms, schools, gyms, and worksites without any manual pumping.

Fill the reservoir, attach the propellant cartridge, and spray.

Disinfect bathrooms, desks, doors, and other small areas and items with these portable sprayers.

Spray liquids with these fillable bottles—the head twists on and off to make filling easy.

Moisten swabs and wipes by pushing down on the top.

Turn these bottles upside down and press the flange to dispense.

Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid.

Add a lid to safely ship with these pails.

Add a tight-fitting, snap-lock lid to safely ship hazardous materials in these sturdy pails.

Also known as closed-head pails, these round jugs have a small top opening. They safely ship hazardous liquids.

Prevent the absorption of harsh solvents, cleaning agents, and adhesives to safely ship hazardous liquids. There is a security ring on the lid that separates when the jug is opened.

The jug in these kits holds its shape as liquid is dispensed. It comes with a cardboard box for protection.

Easily insert and remove parts from these cans.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Deliver a mist of oil using shop air.

Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.