For temporary storage of oil- and solvent-soaked towels and brushes, these containers protect flammable contents from potential fire sources and spontaneous combustion.

Mount these containers to the wall to avoid using valuable floor space.

Store leftover hazardous liquids until they can be properly discarded. The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Plastic cans are for aggressive chemicals and corrosives.

The open top makes these easier to fill than jugs, while the spout gives more control when pouring.

Styles A and C have a lid and threaded spout cap to reduce spills.

Style F have a lid to reduce spills. They also have a thumb-operated flow-control valve that can be locked in the open position for easy pouring. You can use them with oil and other lubricants.

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

These batch cans come with loose fitting dust covers to protect contents from dust and debris.

For technical drawings and 3-D models, click on a part number.

Styles A and B are made of rubber for better crush resistance than plastic pails.

Style C have a straight back that lays flat against the wall when hung with the optional bracket.

Keep contents secure with these pails and tight-fitting lids.

Lids with tear tab have a tamper-evident sealing ring with tab.

Lids with telescoping spout allow controlled pouring.

Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.

Aluminum containers are lightweight, corrosion resistant, and good for general use.

Containers with a side-mount gauge allow you to see the material inside of them when looking from the top.

Glass lids resist corrosion. They’re primarily used to eliminate air bubbles in woodworking projects that use harsh chemicals, which would deteriorate plastic lids. Glass lids are less durable than acrylic lids.

Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.

Replacement lids do not include hardware or seal.

Replacement manifold assemblies include a manifold, vacuum gauge, washer, O-ring, and hex nut.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Style A, B, and C sprayers have a trigger that locks for continuous spray.

Style A sprayers have a filter in the tank to prevent clogs.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Sprayers with a filter prevent clogs.

Sprayers with an extended handle let you pump, pick up, and put down sprayers without bending over, saving you from back strain.

Sprayers with a spray shield focus your spray so that chemicals go only where intended.

These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

The nozzle on this foamer injects air to make cleaners and disinfectants foam. It can also be used as a sprayer. The trigger locks for continuous spraying.

Replacement trigger and wand kits do not include nozzles.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure that the tank, seal, wand, and nozzle are suitable for your application.

Easily insert and remove parts from these cans. Good for small cleaning jobs, they save space and solution. A fusible link closes the cover in the event of a fire.