Material Material |
---|
|
System of Measurement System of Measurement |
---|
|
Capacity Capacity | Show |
---|
|
Capacity Capacity | Hide |
---|
For Use With For Use With |
---|
|
Lid Material Lid Material |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Lid Type Lid Type |
---|
|
Specifications Met Specifications Met |
---|
|
Seal Material Seal Material |
---|
|
Hose Material Hose Material |
---|
|
Removes Particle Size Down To Removes ParticleSize Down To |
---|
|
Easily fill these cans through the detachable wide-mouth funnel, then remove the threaded plug to empty. A flame arrester protects against outside ignition.
Plug | |||||||||
---|---|---|---|---|---|---|---|---|---|
Capacity, gal. | Dia. | Ht. | Color | Funnel Material | Thread Type | Pipe Size | Specifications Met | Each | |
Steel | |||||||||
3 | 11 3/4" | 12 1/4" | Red | Zinc-Plated Steel | NPT | 3/4 | FM Approved | 0000000 | 0000000 |
These carboys are fluorinated to prevent contents from being absorbed.
Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.
Capacity | Mouth | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
gal. | ml | Wd. | Dp. | Ht. | OD | ID | Color | Faucet Material | Seal Material | Autoclavable | Max. Temp., °F | Each | |
PET Plastic | |||||||||||||
3 | 11,350 | 7 1/2" | 7 1/2" | 19 1/2" | 2 1/8" | 1 3/4" | Clear | PET Plastic | Fluoroelastomer Rubber | No | 140° | 0000000 | 000000 |
The open top makes these easier to fill than jugs, while the spout gives more control when pouring.
These metal batch cans meet NSF/ANSI 2 for sanitary design in food-processing environments.
Galvanized steel is more corrosion resistant than tin-plated steel.
Capacity | Dia. | Ht. | Bottom ID | Gauge | Autoclavable | Each | ||
Galvanized Steel | ||||||||
---|---|---|---|---|---|---|---|---|
B | 3 gal. | 11 1/4" | 10 1/4" | 8 1/2" | 28 | No | 000000 | 000000 |
Styles A and B are made of rubber for better crush resistance than plastic pails.
Capacity, gal. | Dia. | Ht. | Bottom ID | Color | Autoclavable | Max. Temp., °F | Each | |
Rubber | ||||||||
---|---|---|---|---|---|---|---|---|
3 | 12 1/2" | 10 1/2" | 7 1/8" | Black | No | 160° | 000000 | 000000 |
Capacity, gal. | Dia. | Ht. | Bottom ID | Graduation Marks | Color | Autoclavable | Max. Temp., °F | Each | |
Rubber | |||||||||
---|---|---|---|---|---|---|---|---|---|
3 | 12 1/2" | 10 1/2" | 7 1/8" | 1/2 gal. | Black | No | 160° | 000000 | 000000 |
Lid | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, gal. | Dia. | Ht. | Bottom ID | Graduation Marks | Color | Type | Material | Autoclavable | Max. Temp., °F | Each | |
Polyethylene Plastic with Polyethylene Plastic Lid | |||||||||||
3 | 11 1/2" | 11" | 8" | 1 qt., 1 gal. | Semi-Clear | Tight Fitting | Polyethylene Plastic | No | 130° | 0000000 | 000000 |
Bottom Inside | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Capacity, gal. | Wd. | Dp. | Ht. | Wd. | Dp. | Color | Autoclavable | Max. Temp., °F | Each | |
Polyethylene Plastic | ||||||||||
3 | 11 3/4" | 12 1/2" | 10 1/4" | 8 1/4" | 8 1/4" | White | No | 130° | 000000 | 000000 |
Pails are often used in food-processing applications.
Style A has been treated to prevent degradation caused by the growth of stain- and odor-causing bacteria and is FDA compliant for direct contact with food. It has a second handle at the bottom for easy pouring. The optional lid for Style A clips onto the back of the pail.
Style | Capacity, gal. | Material | Dia. | Ht. | Bottom ID | Color | Autoclavable | Max. Temp., °F | Specifications Met | Each | |
A | 3 | Polypropylene Plastic | 11 1/2" | 11 3/4" | 9 1/4" | Purple | Yes | 170° | FDA Compliant 21 CFR 176.170, FDA Compliant 21 CFR 177.1500, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1660 | 0000000 | 000000 |
For Pail | Lid | ||||||||
---|---|---|---|---|---|---|---|---|---|
Capacity, gal. | Dia. | Type | Material | Color | Autoclavable | Max. Temp., °F | Specifications Met | Each | |
3 | 11 1/2" | Loose Fitting | Polypropylene Plastic | Purple | Yes | 170° | FDA Compliant 21 CFR 176.170, FDA Compliant 21 CFR 177.1500, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1660 | 0000000 | 00000 |
Often used in food-processing applications, this plastic pail can be located using metal detectors. It has a second handle at the bottom for easy pouring.
The optional lid clips onto the back of the pail.
Pails | Optional Lids | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, gal. | Dia. | Ht. | Bottom ID | Color | Autoclavable | Max. Temp., °F | Specifications Met | Each | Lid Type | Each | ||
Polypropylene Plastic | ||||||||||||
3 | 11 1/2" | 11 3/4" | 9 1/4" | Blue | Yes | 170° | FDA Compliant 21 CFR 176.170, FDA Compliant 21 CFR 177.1500, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1660 | 0000000 | 000000 | Loose Fitting | 0000000 | 000000 |
This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.
Capacity, gal. | Dia. | Ht. | Bottom ID | Graduation Marks | Color | Autoclavable | Max. Temp., °F | Each | |
Rubber | |||||||||
---|---|---|---|---|---|---|---|---|---|
3 | 12 1/2" | 10 1/2" | 7 1/8" | 1/2 gal. | Black | No | 160° | 000000 | 000000 |
Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.
Aluminum containers are lightweight, corrosion resistant, and good for general use.
18-8 stainless steel containers have excellent corrosion resistance and are commonly used in laboratories.
Containers with a side-mount gauge allow you to see the material inside of them when looking from the top.
Glass lids resist corrosion. They’re primarily used to eliminate air bubbles in woodworking projects that use harsh chemicals, which would deteriorate plastic lids. Glass lids are less durable than acrylic lids.
Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.
Replacement lids do not include hardware or seal.
Replacement manifold assemblies include a manifold, vacuum gauge, washer, O-ring, and hex nut.
Containers | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gauge | Hose | Replacement Lids | |||||||||||||||||
Cap. | Dia. | Ht. | Bottom ID | Vacuum Range, in. of Hg | Accuracy | Grad. Marks, in. of Hg | Lg. | Thread Size | Gender | For Connection Style | For Flared Angle | For Tube OD | Max. Temp., °F | Removes Particle Size Down To | Includes | Each | Each | ||
Aluminum with Top-Mount Gauge | |||||||||||||||||||
Acrylic Plastic Lid with Silicone Rubber Seal | |||||||||||||||||||
3 gal. | 10 3/4" | 9" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 0000000 | 0000000 | 000000 |
Aluminum with Side-Mount Gauge | |||||||||||||||||||
Glass Lid with Silicone Rubber Seal | |||||||||||||||||||
3 gal. | 10 1/4" | 9 3/4" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 000000 | 00 |
Acrylic Plastic Lid with Silicone Rubber Seal | |||||||||||||||||||
3 gal. | 10 3/4" | 9" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
18-8 Stainless Steel with Top-Mount Gauge | |||||||||||||||||||
Acrylic Plastic Lid with Silicone Rubber Seal | |||||||||||||||||||
3 gal. | 10 3/4" | 11" | 9" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 000000 | 00 |
3 gal. | 11 1/4" | 8 3/4" | 10 1/2" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
18-8 Stainless Steel with Side-Mount Gauge | |||||||||||||||||||
Glass Lid with Silicone Rubber Seal | |||||||||||||||||||
3 gal. | 10 3/4" | 11" | 10" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
3 gal. | 11 1/4" | 8 3/4" | 10 1/2" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
Acrylic Plastic Lid with Silicone Rubber Seal | |||||||||||||||||||
3 gal. | 11 1/4" | 8 3/4" | 10 1/2" | 30 to 0 | ±5% | 0.5 | 5 ft. | 7/16"-20 UNF | Female | Flared | 37°, 45° | 1/4" | 150° | 50 microns | 50 Micron Air Filter, Lid | 0000000 | 000000 | 0000000 | 00000 |
Gauge Mounting Location | Each | |
Side | 0000000 | 000000 |
Removes Particle Size Down To | Each | |
50 microns | 0000000 | 00000 |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Replacement trigger and wand kits do not include nozzles.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Styles A-C have a trigger that locks for continuous spray.
Style A have a filter in the wand to prevent clogs.
Sprayers | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fill Opening | Repair Kits | Replacement Trigger and Wand Kits | ||||||||||||||
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Color | Hose Lg. | Wand Lg. | Dia. | Includes | Each | Each | Each | |||
Mist/Stream Dispensing | ||||||||||||||||
A | 3 | 7 5/8" | 24" | Epoxy-Coated Galvanized Steel | Buna-N Rubber | Blue | 41" | 15" | 2" | __ | 0000000 | 000000 | 0000000 | 000000 | 000000 | 000000 |
Cone/Flat/Stream Dispensing | ||||||||||||||||
B | 3 | 7" | 25" | Stainless Steel | Viton® Fluoroelastomer Rubber | __ | 40" | 18" | 5 1/4" | Shoulder Strap | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
Push down on the spring-loaded drain plate to submerge and agitate to clean parts. The drain plate acts as a flame arrester in the event of a fire.
Drain Plate | ||||||||
---|---|---|---|---|---|---|---|---|
Cap., gal. | OD | O'all Ht. | Dia. | Material | Material | Specifications Met | Each | |
For Solvent-Based Solutions | ||||||||
3 | 13 1/2" | 6" | 12 1/8" | Steel | Steel | FM Approved | 000000 | 0000000 |