Thick side plates allow this chain to handle greater capacity than standard chain.

This treated steel chain has over eight times the capacity of stainless steel chain.

Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain.

A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants.

This treated steel chain has over six times the capacity of stainless steel chain.

This chain is made of steel.

This steel chain handles higher loads than stainless steel chain.

Also known as side bow chain, this chain has extra clearance between components for flexing from side to side on systems with curved tracks and sprockets that aren’t exactly aligned.

Made of treated steel, these links offer increased corrosion resistance over steel attachment links.

Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.

This treated steel chain has over seven times the capacity of stainless steel chain.

Connect attachments to this metric chain without disassembling it. In addition to letting you add attachments with extension pins or rods for conveyance or elevation applications, the hollow pins on this chain weigh less than standard pins.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Drive the end through the eye and weld or flatten the extended end to resist opening. These links are also known as cold shuts.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

For security, these connectors must be cut off to be removed.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

A pear-shaped link and hook for chain shortening allow you to create an adjustable-length chain sling.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The pins have flush ends to prevent snagging and accidental disengagement.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A lip on the shackle keeps the pin from falling out when loosened.

Minimize twisting and knotting of rope and chain.

A lip on the shackle keeps the screw from falling out when loosened.

A lip on the shackle keeps the pin from falling out when loosened.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

Mount these links in a drilled hole to secure small items such as pens. Links can also be attached as the end of a pull chain.