McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    21 Products

    7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers

    Image of Product. Flat Chisel Bit Blade (5/8" Wd.). Front orientation. Chisel Bits. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers, Flat Chisel Bit Blade, 5/8" Wide Blade.
    Image of Product. Flat Chisel Bit Blade (1 1/2" Wd.). Front orientation. Chisel Bits. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers, Flat Chisel Bit Blade, 1 1/2" Wide Blade.
    Image of Product. Offset Chisel Bit Blade. Front orientation. Chisel Bits. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers, Offset Chisel Bit Blade.

    Flat Chisel Bit Blade

    (5/8" Wd.)

    Flat Chisel Bit Blade (1

    1/2" Wd.)

    Offset Chisel Bit

    Blade

    Image of Product. Blank Chisel Bit Blade. Front orientation. Chisel Bits. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers, Blank Chisel Bit Blade.
    Image of Product. Scaler Chisel Bit Blade. Front orientation. Chisel Bits. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers, Scaler Chisel Bit Blade.

    Blank Chisel

    Bit Blade

    Scaler Chisel

    Bit Blade

    Image of Attribute. Front orientation. Contains Annotated. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers.
    Image of Attribute. Front orientation. Contains Annotated. 7/16" Octagonal-Shank Chisel Bits for Quick-Change Chiseling Hammers.
    Use with air-powered hammers.
    Shank
    Blade
    Wd.
    Overall
    Lg.
    Type
    Size
    Lg.
    Material
    Compatible Tools
    Each
    Flat Chisel Bit Blade
    5/8"4"Octagon7/16"9/32"SteelSuperior Pneumatic 90000, Superior Pneumatic 900010000000000000
    5/8"7"Octagon7/16"9/32"SteelSuperior Pneumatic 90000, Superior Pneumatic 90001000000000000
    1 1/2"12"Octagon7/16"9/32"SteelSuperior Pneumatic 90000, Superior Pneumatic 90001000000000000
     
    Offset Chisel Bit Blade
    3/4"3 1/2"Octagon7/16"9/32"SteelSuperior Pneumatic 90000, Superior Pneumatic 90001000000000000
     
    Blank Chisel Bit Blade
    1/2"3"Octagon7/16"9/32"SteelSuperior Pneumatic 90000, Superior Pneumatic 90001000000000000
     
    Scaler Chisel Bit Blade
    1/2"3 1/2"Octagon7/16"9/32"SteelSuperior Pneumatic 90000, Superior Pneumatic 90001000000000000
     

    0.495" Octagonal-Shank Chisel Bits for Needle Scalers

    Image of Product. Flat Chisel Bit Blade (3/4" Wd.). Front orientation. Chisel Bits. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers, Flat Chisel Bit Blade, 3/4" Wide Blade.
    Image of Product. Flat Chisel Bit Blade (1 3/8" Wd.). Front orientation. Chisel Bits. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers, Flat Chisel Bit Blade, 1 3/8" Wide Blade.
    Image of Product. Flat Chisel Bit Blade (2" Wd.). Front orientation. Chisel Bits. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers, Flat Chisel Bit Blade, 2" Wide Blade.

    Flat Chisel Bit

    Blade (3/4" Wd.)

    Flat Chisel Bit

    Blade (1 3/8" Wd.)

    Flat Chisel Bit

    Blade (2" Wd.)

    Image of Product. Flat Chisel Bit Blade (3" Wd.). Front orientation. Chisel Bits. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers, Flat Chisel Bit Blade, 3" Wide Blade.
    Image of Product. Offset Chisel Bit Blade. Front orientation. Chisel Bits. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers, Offset Chisel Bit Blade.

    Flat Chisel Bit

    Blade (3" Wd.)

    Offset Chisel Bit Blade

    Image of Attribute. Front orientation. Contains Annotated. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers.
    Image of Attribute. Front orientation. Contains Annotated. 0.495" Octagonal-Shank Chisel Bits for Needle Scalers.
    Shank
    Blade
    Wd.
    Overall
    Lg.
    Type
    Size
    Lg.
    Material
    Compatible Tools
    Each
    Flat Chisel Bit Blade
    3/4"7"Octagon0.495"51/64"SteelChicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Jet JAT-801, Nitto Kohki CH-240000000000000
    3/4"7"Octagon0.495"1 5/32"SteelIngersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1000000000000
    1 3/8"7"Octagon0.495"51/64"SteelChicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Jet JAT-801, Nitto Kohki CH-24000000000000
    1 3/8"7"Octagon0.495"1 5/32"SteelIngersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1000000000000
    1 3/8"12"Octagon0.495"51/64"SteelChicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Jet JAT-801, Nitto Kohki CH-24000000000000
    1 3/8"12"Octagon0.495"1 5/32"SteelIngersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1000000000000
    2"7"Octagon0.495"51/64"SteelChicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Jet JAT-801, Nitto Kohki CH-24000000000000
    3"7 1/2"Octagon0.495"51/64"SteelChicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Jet JAT-801, Nitto Kohki CH-24000000000000
     
    Offset Chisel Bit Blade
    1 3/8"7"Octagon0.495"51/64"SteelChicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Jet JAT-801, Nitto Kohki CH-24000000000000
    1 3/8"7"Octagon0.495"1 5/32"SteelIngersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1000000000000
    1 3/8"18"Octagon0.495"17/32"SteelIngersoll-Rand 182LNA1, Nitto Kohki CH-24000000000000
     

    Nonsparking 0.495" Octagonal-Shank Chisel Bits for Needle Scalers

    Image of Product. Front orientation. Chisel Bits. Nonsparking 0.495" Octagonal-Shank Chisel Bits for Needle Scalers.
    Image of Attribute. Front orientation. Contains Annotated. Nonsparking 0.495" Octagonal-Shank Chisel Bits for Needle Scalers.
    Image of Attribute. Front orientation. Contains Annotated. Nonsparking 0.495" Octagonal-Shank Chisel Bits for Needle Scalers.
    Made of aluminum bronze that is Factory Mutual approved, this chisel bit inhibits sparking and is nonmagnetic and corrosion resistant. It satisfies OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use with Air-Powered Needle Scalers/Chiseling Hammers.
    Warning: Do not use this tool in direct contact with acetylene.
    Shank
    Blade
    Wd.
    Overall
    Lg.
    Type
    Size
    Lg.
    Material
    Each
    Flat Chisel Bit Blade
    2"7 3/4"Octagon0.495"5/8"Aluminum Bronze00000000000000
     

    Quick-Change Chiseling Air Hammers

    Image of Product. Front orientation. Air Hammers. Quick-Change Chiseling Air Hammers, Straight Grip.
    Image of Product. Front orientation. Air Hammers. Quick-Change Chiseling Air Hammers, Pistol Grip.

    Straight Grip

    Pistol Grip

    Designed for fast-hitting and light striking, these hammers allow easy chisel changes—pull back on the retainer to insert or remove the chisel. Use for scaling, trimming, cutting, chipping, piercing, and peening. These tools are not suitable for driving rivets.
    Piston Stroke—Piston stroke determines the hammering power. The longer the stroke, the greater the power.
    Air Inlet
    For 7/16" Octagon
    Chisel Shank
    Blows per
    min.
    Piston
    Stroke
    Average Air Consumption,
    ft³/min
    Recommended Operating
    Air Pressure, psi
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Overall
    Lg.
    Wt.,
    lb.
    Housing
    Material
    Barrel
    Material
    Each
    Straight Grip—Lever Speed Control
    0 to 13,0003/4"4901/4
    		NPT
    		Female1/4"7 1/4"1.3Aluminum
    		Steel00000000000000
     
    Pistol Grip—Button Speed Control
    0 to 13,0003/4"4901/4
    		NPT
    		Female1/4"6"1.3Aluminum
    		Steel0000000000000
     
    Chisels for 0-13,000 Blows per Minute Hammers
    Image of Product. Blank Chisel Bit Blade. Front orientation. Chisel Bits. Quick-Change Chiseling Air Hammers, Blank Chisel Bit Blade, 1/2" Wide Blade, Octagonal Shank.
    Image of Product. Flat Chisel Bit Blade (5/8" Wd.). Front orientation. Chisel Bits. Quick-Change Chiseling Air Hammers, Flat Chisel Bit Blade, 5/8" Wide Blade, Octagonal Shank.
    Image of Product. Flat Chisel Bit Blade (1 1/2" Wd.). Front orientation. Chisel Bits. Quick-Change Chiseling Air Hammers, Flat Chisel Bit Blade, 1 1/2" Wide Blade, Octagonal Shank.

    Blank Chisel

    Bit Blade

    Flat Chisel Bit Blade

    (5/8" Wd.)

    Flat Chisel Bit Blade (1

    1/2" Wd.)

    Image of Product. Offset Chisel Bit Blade. Front orientation. Chisel Bits. Quick-Change Chiseling Air Hammers, Offset Chisel Bit Blade, 3/4" Wide Blade, Octagonal Shank.
    Image of Product. Scaler Chisel Bit Blade. Front orientation. Chisel Bits. Quick-Change Chiseling Air Hammers, Scaler Chisel Bit Blade, 1/2" Wide Blade, Octagonal Shank.
    Image of Attribute. Front orientation. Contains Annotated. Quick-Change Chiseling Air Hammers, 9/32" Long Shank.

    Offset Chisel Bit

    Blade

    Scaler Chisel

    Bit Blade

    9/32" Long Shank

    Blade
    Wd.
    Overall
    Lg.
    Shank Type
    Shank
    Lg.
    Material
    Each
    Blank Chisel Bit Blade
    1/2"3"7/16" Octagon9/32"Steel0000000000000
     
    Flat Chisel Bit Blade
    5/8"4"7/16" Octagon9/32"Steel000000000000
    5/8"7"7/16" Octagon9/32"Steel000000000000
    1 1/2"12"7/16" Octagon9/32"Steel000000000000
     
    Offset Chisel Bit Blade
    3/4"3 1/2"7/16" Octagon9/32"Steel000000000000
     
    Scaler Chisel Bit Blade
    1/2"3 1/2"7/16" Octagon9/32"Steel000000000000
     

    Air-Powered Scrapers/Chippers

    Image of Product. Front orientation. Scrapers. Air-Powered Scrapers/Chippers.
    Remove weld flux and spatter as well as perform a variety of light chipping applications.
    Piston Stroke—Piston stroke determines the force of a scraper; the longer the stroke, the greater the force.
    Blade
    Air Inlet
    For
    Chisel Shank
    Overall
    Lg.
    Wd.
    Lg.
    Material
    Shape
    Edge
    Flexibility
    Blade
    Replaceable
    Handle
    Material
    Blows per
    min.
    Piston
    Stroke
    Average Air Consumption,
    ft³/min
    Recommended Operating
    Air Pressure, psi
    For Air
    Hose ID
    Pipe
    Size
    Thread
    Type
    Gender
    Type
    Lg.
    Wt.,
    lb.
    Housing
    Material
    Each
    12"1"6 1/8"SteelAngledStraightRigidYesSteel4,0001 1/8"7853/8"3/8
    		NPT
    		Female0.495" Octagon17/32", 51/64"3.8Steel00000000000000
     
    Replacement Parts
    Image of Product. Flat Chisel Bit Blade (1 3/8" Wd.). Front orientation. Chisel Bits. Air-Powered Scrapers/Chippers.
    Image of Product. Flat Chisel Bit Blade (2" Wd.). Front orientation. Chisel Bits. Air-Powered Scrapers/Chippers.
    Image of Product. Flat Chisel Bit Blade (3/4" Wd.). Front orientation. Chisel Bits. Air-Powered Scrapers/Chippers.
    Image of Product. Offset Chisel Bit Blade. Front orientation. Chisel Bits. Air-Powered Scrapers/Chippers.

    Flat Chisel Bit

    Blade (1 3/8" Wd.)

    Flat Chisel Bit

    Blade (2" Wd.)

    Flat Chisel Bit

    Blade (3/4" Wd.)

    Offset Chisel Bit Blade

    Image of Attribute. Front orientation. Contains Annotated. Chisel Bits. Air-Powered Scrapers/Chippers.
    Image of Attribute. Front orientation. Contains Annotated. Chisel Bits. Air-Powered Scrapers/Chippers.
    Blade
    Wd.
    Overall
    Lg.
    Shank Type
    Shank
    Lg.
    Material
    Each
    Flat Chisel Bit Blade
    3/4"7"0.495" Octagon51/64"Steel0000000000000
    1 3/8"7"0.495" Octagon51/64"Steel000000000000
    1 3/8"12"0.495" Octagon51/64"Steel000000000000
    2"7"0.495" Octagon51/64"Steel000000000000
    3"7 1/2"0.495" Octagon51/64"Steel000000000000
     
    Offset Chisel Bit Blade
    1 3/8"7"0.495" Octagon51/64"Steel000000000000
    1 3/8"18"0.495" Octagon17/32"Steel000000000000
     
    back to top