System of Measurement System of Measurement |
|---|
|
Grip Range Grip Range |
|---|
|
|
Collet Type Collet Type |
|---|
 | ER-16 |
For Holding For Holding |
|---|
|
Face Type Face Type |
|---|
 | Round |
Overall Length Overall Length |
|---|
|
Maximum Body Diameter Maximum Body Diameter |
|---|
|
Material Material |
|---|
|
For Use With For Use With |
|---|
|
Approximate Diameter Compression Approximate DiameterCompression |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
ER-16 Collets
Install into an ER-16 collet chuck or holder to tightly grip round-shank tool bits in milling machines.
For technical drawings and 3-D models, click on a part number.
| Size | Grip Range | Workpiece Dia. Tolerance | Max. Body Dia. | Approximate Dia. Compression | Overall Lg. | Material | Each | |
Round | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/32" | 0.027"-0.031" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 000000 |
| 1/16" | 0.047"-0.063" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 3/32" | 0.078"-0.094" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 1/8" | 0.109"-0.125" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 5/32" | 0.125"-0.156" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 3/16" | 0.156"-0.187" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 7/32" | 0.187"-0.219" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 1/4" | 0.219"-0.250" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 9/32" | 0.250"-0.281" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 5/16" | 0.281"-0.312" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 11/32" | 0.312"-0.344" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 3/8" | 0.344"-0.375" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |
| 13/32" | 0.375"-0.406" | -0.0001" to 0.0001" | 0.677" | 1/32" | 1.06" | Hardened Steel | 00000000 | 00000 |