These chucks have a ratcheting mechanism which allows for easier tightening and releasing of drill bits and other tools.

Use the included spanner wrench to tighten the chuck for up to three times the gripping torque of hand tightening.

The integral arbor is more rigid for greater accuracy than a drill chuck used with a separate arbor.

Adapt standard impact wrenches for drilling applications. These chucks mount directly onto the square-drive spindle of an impact wrench.

A ball-bearing design provides increased gripping force to keep bits from slipping, which allows these chucks to take on high-torque drilling applications. Also known as super chucks.

Convert a power screwdriver or impact driver into a versatile drill. Also known as adapt-a-drive, these chucks have a 1/4" hex shank that fits the hex drive in most power screwdrivers and impact drivers.

Made of stainless steel, these chucks are rust and corrosion resistant.

The Morse taper end fits into a machine spindle and the Jacobs taper end is compatible with a Jacobs taper drill chuck.

Separate Morse taper shank cutting tools from machinery spindles and Morse taper adapters. These tools are also known as drill drifts and drift keys.

The Morse taper end fits into a machine spindle and the threaded end is compatible with a thread-mount drill chuck.

For better control when drilling small holes with a drill press or milling machine, the attachment on these arbors lets you apply light feed pressure with your fingers while the machine rotates the bit.

Use with R8 taper spindles which are most often found on manual milling machines.

No more lost keys—also known as key leashes, use these holders to secure your chuck key to your drill's power cord.

Use these collets to securely hold round-shank tool bits in the R8 spindle of a milling machine.

Install into an ER-11 collet chuck or holder to tightly grip round-shank tool bits in milling machines.

Install into an ER-20 collet chuck or holder to tightly grip round-shank tool bits in milling machines.

Use these collets in milling machines that have an ER-25 collet chuck. With a round face and adjustable body, they compress to grip round-shank drill bits, end mills, reamers, and taps.

When installed into a 3J collet chuck or holder, these collets securely grip round workpieces. They provide a stronger hold on small workpieces than a standard lathe chuck.

Also known as emergency collets, these collets have a machinable face for boring an opening to the exact size and shape you need.

When installed into a 3J collet chuck or holder, these collets securely grip workpieces.

Save time when switching to a new workpiece by changing out the head instead of the entire collet.

These collets tightly grip workpieces when installed into a 5C collet chuck or holder. They provide a stronger hold on small workpieces than a standard lathe chuck.

Install a 5C collet into one of these chucks to hold a workpiece for machining parallel or square edges and drilling crossholes.

Attach taps to auto-reversing tap holders for Jacobs taper shanks.

Also known as tap chucks, these fit into machines that have a Morse taper spindle.

Also known as scroll chucks, these are self centering—all three jaws move in unison, centering the workpiece as they close.

No need to break down a collet set up when a workpiece doesn't fit a 5C collet. Install one of these lathe chuck adapters in your 5C collet chuck or holder and its three jaws will securely grasp the workpiece.

Made from hardened steel, these jaws have a long service life even when performing heavy machining such as roughing cuts.

When hand pressure is released, these wrenches automatically pop out of lathe chucks to keep users and machines safe from harm. Use them to prevent accidents that can occur when someone forgets to remove their wrench before turning on a lathe.

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

Pass wires and rods through the hollow body of these vises.

Each end of the vise has a collet to hold a different tool—turn the collar to close the collets around them.

A rubber-covered body provides a comfortable grip. These vises have a rotating end cap on the handle that allows you to apply constant pressure while turning the body of the vise with your fingertips.

Grip and release parts using 5C collets. Use on milling machines, drill presses, or anywhere else you can mount this fixture.

Used with a 5C collet, these fixtures rotate round, hex, or square workpieces up to 1 1/8" diameter in precise increments. Also known as spindexers or punch formers.

Attach these chucks to your air hose so you can connect the hose to Schrader valves.