Grip, bend, and twist wire and other small workpieces. Also known as needle-nose and chain-nose pliers, these tools have long, tapered jaws.

Extra-long handles enable access in hard-to-reach areas.

Tips almost twice as wide as those of standard long-nose pliers give you a better grip on your work. These are also known as duckbill and flat-nose pliers.

Additional features, such as wire terminal crimpers and wire stripping holes, enable you to perform a variety of electrical wiring and installation work with a single tool.

With thinner tips than standard long-nose pliers, these stainless steel tools fit into tight spaces and are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Colorful plastic grips make these tools stand out, so they're less likely to be misplaced.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

The grips drain static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Slide the pivot point of the jaws to a range of positions and squeeze the handles to grip.

You don't have to move the pivot point on these pliers—squeeze the handles and the jaws adjust to fit your workpiece.

Move the curved jaws to 15 positions for fine adjustment. These pliers have a bottom jaw that is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

Avoid damaging workpieces without sacrificing gripping power and adjustability.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Sets contain an assortment of pliers styles. These tools are steel.

Insulated grips protect against accidental contact with live electrical circuits. These assorted pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

Adjust the pivot point to switch between two different jaw opening sizes.

The narrow jaws fit into tight spaces, and the slip joint allows you to switch between two different jaw opening sizes.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Extra-long handles enable access to hard-to-reach areas. Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.

Avoid the potential for an arc flash or short circuit that can occur when using conventional insulated tools with metal components. Completely metal-free, these pliers are plastic with ceramic cutting blades. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to pull, bend, and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to pull, bend, and cut wire.

Lock the jaws in a vise-like grip around a workpiece and these pliers stay clamped in place to leave your hands free.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws around a workpiece and they stay clamped in a vise-like grip.

Long jaws reach workpieces in recessed areas. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines.

Curved jaws grip bolt heads and nuts with rounded corners. These pliers lock in a vise-like grip and stay clamped in place, leaving your hands free.

Change out worn or broken springs in the handle of your locking pliers.

Reach around closely spaced components and other obstructions.

Extra-long handles enable access to hard-to-reach areas. These pliers are shaped to reach around closely spaced components and other obstructions.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. They are shaped to reach around closely spaced components and other obstructions.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers and shaped to reach around closely spaced components and other obstructions.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. Designed for looping and bending wire, they are also known as round-nose pliers.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Also known as round-nose pliers, use them for looping and bending wire.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. Also known as miniature and electronics pliers, they have a round nose for looping and bending wire.

Move the curved jaws to 25 positions for fine adjustment and a firm grip on round objects, such as oil filters, connectors, and PVC pipe. Push and hold the button to adjust the jaws, and then release the button to lock them in place. They're also known as cannon plug pliers.

Curved, serrated jaws firmly grip hose and tube for installation and removal without damage.

Also known as hemostats, these tongs enable intricate work in tight spaces and the jaws can be locked closed. The handle has interlocking teeth that allow you to adjust the clamping pressure.

Turn the knob to adjust the opening size.

Squeeze the handles and the jaws will automatically adjust to fit your workpiece.

Angled jaws clamp sheets, bars, and U-channels at 90°.

Mount to the top of your workbench.

The long, pivoting jaws let you clamp farther into your workpiece and in tight spots.

Squeeze the handles to open the clamp; release and the spring holds it tightly in place.

The long, narrow jaws clamp farther into a workpiece and in tight spots.

Press the lever to lock the clamp onto material.

Extend the handle to reach the clamp into tight spaces.

Set includes 12 clamps and the installation pliers required for positioning and removal.

Also known as diagonal-cutting pliers.

Leverage points in both the jaws and the handle give you more power with less effort.

These cutters are stainless steel, which provides excellent corrosion resistance.

The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).

These tools divert static electricity faster than our other static-control wire cutters.

The specially designed internal spring provides constant, uniform tension for superior performance.