The tank is corrosion resistant.

Quiet enough for office areas, yet powerful enough for demanding jobs.

Our smallest wet/dry vacuum cleaners, use these for minor spills and messes.

The steel housing makes this vacuum cleaner more durable than other plug-in drum-top vacuum cleaners.

Rated for environments where hazardous material is present, these continuous-duty vacuum cleaners provide powerful suction.

Get the power of a plug-in wet/dry vacuum cleaner without the hassle of a cord.

These vacuum cleaners work well for cleaning machinery and workstations.

More powerful than the standard backpack vacuum cleaner, this vacuum converts to a blower with the included blower nozzle.

Capacity is 1 quart.

The flexible hose provides access to blind holes in tanks, bins, and barrels.

Carry this lightweight vacuum cleaner on your back for comfortable mobility while cleaning.

Use as either a vacuum or a blower—change the airflow direction to switch functions. Use to clean up dirt, dust, metal chips, and glass.

To maintain clean rooms, use this vacuum cleaner that has an ULPA filter that is 99.99% efficient at 0.12 microns.

This vacuum cleaner is grounded and prevents buildup from electrostatic discharge that can damage sensitive electronic equipment.

Made of stainless steel, the tank on this vacuum cleaner is corrosion resistant so it can be used both indoors and outdoors. Works well for fleet maintenance.

These vacuum cleaners are rated for environments where hazardous material is present.

These vacuum cleaners are suitable for use in clean rooms rated to both Federal Standard and ISO classes. A micro filter protects the HEPA filter, which is 99.97% efficient at 0.3 microns.

Remove coolant, sludge, slurries, and metal chips from sumps and other liquid reservoirs.

This cleaner sprays cleaning solution onto carpet and upholstery and then recovers the dirty solution into the removable tank.

Remove muck, debris, and sediment (even small pebbles and leaves) from underwater surfaces. This vacuum cleaner uses water pressure from a garden hose to create suction for vacuuming.

Connect vacuum hose and fittings.

Add brushes, crevice tools, blower nozzles, extension wands, and other attachments to your vacuum hose.

Keep food processing areas tidy with these dust pans—they have metal and chemical additives that will set off metal detectors and show up on an X-ray if they fall into your line.

Avoid cross contamination by using different colors for specific areas.

Plastic bristles resist chemicals.

Soft, flexible horsehair bristles are good for fine sweeping on hardwood flooring and tile.

These brooms have soft, flexible bristles that sweep away fine to medium dust and dirt on nonporous surfaces such as tile, wood, and smooth concrete.

Bristles are made from chemical-resistant materials.

Chemical-resistant plastic bristles are flexible and narrow, making them a good choice for a variety of spills in small spaces.

Reduce the possibility of cross contamination by designating colors to certain areas of your facility.

The cartridges in these collectors are 98% efficient for particles 1 micron and larger—great for picking up fine dust such as graphite and talc.

Use these components to put together a duct system to collect sawdust, chips, shavings, and granular material from woodworking operations.

Slip these sleeves over any wool, microfiber, or feather duster to prolong its life while attracting and holding dust.

Replace your old rags and cloths with these secure-fitting gloves that are good for dusting rounded surfaces. They have specially treated layers of microfiber that attract and hold dust like a magnet.

Extract the dust from your blasting cabinet to increase effectiveness and improve visibility.

Lift the front door to load and remove parts.

Magnetized on all sides, these wand-like tools remove steel chips from machinery, the floor, and your clothing. Pull the plunger to demagnetize and drop the chips into your collection bin.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

Magnets on these catchers attach to metal surfaces and contain metal chips created during drilling.

For use with a wide range of threaded hole diameters, these sets include multiple retrievers. Insert the retriever into a tapped hole and pull out to remove chips.

Clean parts with compressed air without propelling fluids and debris all over your shop. These vacuum/blowers quickly blow coolant, oil, and chips off your parts while a vacuum sucks them into a removable drum for recycling or disposing of them.

Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts.

Bend this hose in any direction and it will hold its shape without support.

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.

The smooth interior prevents dust from getting trapped and building up inside the hose.

A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.

Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.

Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).

The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.

A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.

Often used in machine shops, these cleaners remove oil and coolant mist from the air.

Brushes are made of FDA listed materials so they can be used for food and beverage conveying.

These brushes have a stainless steel backing for corrosive environments.

Bristles control static buildup.

To simplify installation, bristles come stapled into a holder.

Mount brushes by inserting them into a holder. Holders can be cut with scissors.

Connect this receiver to your PC for use with a Starrett wireless transmitter.

Use these cables to connect measuring tools with SPC data output directly to a PC.

Analyze data, perform calculations, and print results from measuring tools with SPC data output.

Send measurement data via Bluetooth to PCs, smartphones, and tablets.

Connect this receiver to your PC for use with a Mitutoyo wireless transmitter.

Use these cables to connect measuring tools with SPC data output directly to a PC.