Material Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
For Use With For Use With |
|---|
|
|
For Minimum Coating Thickness For MinimumCoating Thickness |
|---|
|
About Gears
More
Condenser and Evaporator Fin-Straightening Kits
Kits include a handle and six interchangeable heads to fit a variety of fin spacings. Use them to clean as well as straighten fins on condensers and evaporators to keep cold air flowing.
Additional heads are sold separately.
Condenser and Evaporator Fin-Straightening Combs
Each comb fits two different fin spacings. Use them to clean as well as straighten fins on condensers and evaporators to keep cold air flowing.
Adhesive-Back Slotted Wire Duct with Snap-On Cover
Faster to install than standard slotted wire duct, attach this wire duct to flat, clean surfaces with the adhesive back. This duct is often used as an alternative to cable ties to guide and organize short runs of electrical wiring in enclosures, control panels, and machines. Fingers hold wire and cable in, yet allow you to direct them in and out of the duct (remove fingers to enlarge the opening size). The cover snaps on and is removable. This duct meets UL 94 V-0 for flame retardance.
For longer runs, lengths can be mounted end-to-end, but they are not connectable.
For technical drawings and 3-D models, click on a part number.
| Ht. | Wd. | Slot Wd. | Material | Mount Type | Specifications Met | Choose a Color | 3 1/4 ft. | 6 ft. | 6 1/2 ft. | |
| 5/8" | 1/2" | 0.2" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | Gray | 0000000 | |||
| 1" | 1/2" | 0.2" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | Gray | 0000000 | |||
| 1" | 1" | 0.4" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 1 1/2" | 1" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 1 1/2" | 1 1/2" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 2 1/4" | 1 1/2" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 2 1/4" | 2 1/4" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 2 1/4" | 3" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 3" | 1" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 3" | 1 1/2" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 3" | 2 1/4" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 3" | 3" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 3" | 4" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 4" | 3" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 | ||||
| 4" | 4" | 0.31" | PVC | Adhesive Back | CSA Certified, UL 94 V-0, UL Recognized Component | 0000000 |
Flexible Slotted Wire Duct
Route wire and cable around curves with this bendable wire duct. It is often used as an alternative to cable ties to guide and organize short runs of electrical wiring in enclosures, control panels, and machines. Fingers on this slotted wire duct overlap to form a canopy and allow you to direct wire and cable in and out.
| Ht. | Wd. | Lg. | Slot Wd. | Material | Mount Type | Mounting Hole Dia. | No. of Mounting Holes | Mounting Fasteners Included | Choose a Color | Each | |
| 1/2" | 1/2" | 19 3/4" | 0.29" | Polypropylene | Adhesive Back, Screw On | 0.16" | 20 | No | Gray | 00000000 | 00000 |
| 3/4" | 1/2" | 19 3/4" | 0.29" | Polypropylene | Adhesive Back, Screw On | 0.18" | 10 | No | 00000000 | 0000 | |
| 1" | 1" | 19 3/4" | 0.29" | Polypropylene | Adhesive Back, Screw On | 0.16" | 20 | No | Gray | 00000000 | 00000 |
| 1 3/8" | 1" | 19 3/4" | 0.29" | Polypropylene | Adhesive Back, Screw On | 0.17" | 10 | No | 00000000 | 00000 | |
| 1 3/4" | 1 3/8" | 19 3/4" | 0.29" | Polypropylene | Adhesive Back, Screw On | 0.25" | 10 | No | 00000000 | 00000 | |
| 2" | 2" | 19 3/4" | 0.29" | Polypropylene | Adhesive Back, Screw On | 0.16" | 20 | No | Gray | 00000000 | 00000 |
Narrow-Slotted Wire Duct with Snap-On Cover
Narrower slots and fingers create more access and routing points than on standard slotted wire duct. Often used as an alternative to cable ties, this wire duct routes short runs of electrical wiring in enclosures, control panels, and machines. The cover snaps on and is removable. This duct meets UL 94 V-0 for flame retardance.
For longer runs, lengths can be mounted end-to-end, but they are not connectable.
For technical drawings and 3-D models, click on a part number.
| Ht. | Wd. | Slot Wd. | Material | Mount Type | Mounting Hole Dia. | Mounting Fasteners Included | Specifications Met | Choose a Color | 3 1/4 ft. | 6 1/2 ft. | |
| 1" | 1" | 0.2" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 1 1/2" | 1" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 1 1/2" | 1 1/2" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 2 1/4" | 1 1/2" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 2 1/4" | 2 1/4" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 2 1/4" | 3" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 3" | 1" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 3" | 1 1/2" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 3" | 2 1/4" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 3" | 3" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 3" | 4" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 4" | 3" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 | |||
| 4" | 4" | 0.16" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 00000000 |
Slotted Wire Duct with Snap-On Cover
Often used as an alternative to cable ties, wire duct guides and organizes short runs of electrical wiring in enclosures, control panels, and machines. Fingers on this slotted wire duct hold wire and cable in, yet allow you to direct them in and out of the duct (remove fingers to enlarge the opening size). The cover snaps on and is removable. This duct meets UL 94 V-0 for flame retardance.
For longer runs, lengths can be mounted end-to-end, but they are not connectable.
Cut-to-length wire duct is best when your project requires a custom size.
Finished wire duct is sized to fit standard enclosures, saving you the hassle of measuring and cutting. Because there's no cutting, the ends are smooth for a finished look. The mounting holes are centered along the rail, so you don't have to calculate or plan like you would when cutting down long runs of wire duct.
For technical drawings and 3-D models, click on a part number.
| Ht. | Wd. | Slot Wd. | Material | Mount Type | Mounting Hole Dia. | Mounting Fasteners Included | Specifications Met | Color | 3 1/4 ft. Lg. | 6 ft. Lg. | 6 1/2 ft. Lg. | |
| 5/8" | 1/2" | 0.2" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | Gray | 0000000 | |||
| 1" | 1/2" | 0.2" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | Gray | 0000000 | |||
| 1" | 1" | 0.4" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 1 1/2" | 1" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 1 1/2" | 1 1/2" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 2 1/4" | 1 1/2" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 2 1/4" | 2 1/4" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 2 1/4" | 3" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 3" | 1" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 3" | 1 1/2" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 3" | 2 1/4" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 3" | 3" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 3" | 4" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 4" | 3" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 | ||||
| 4" | 4" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | 0000000 |
| Ht. | Wd. | Slot Wd. | Material | Mount Type | Mounting Hole Dia. | Mounting Fasteners Included | Specifications Met | Color | 6 1/4" Lg. | 10 1/4" Lg. | 18" Lg. | 22" Lg. | 29 3/4" Lg. | |
| 1 1/2" | 1" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | Gray | 0000000 | |||||
| 1 1/2" | 1 1/2" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | Gray | 0000000 | |||||
| 2 1/4" | 1 1/2" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | Gray | 0000000 | |||||
| 2 1/4" | 2 1/4" | 0.31" | PVC | Screw On | 0.2" | No | UL Recognized Component, UL 94 V-0, CSA Certified | Gray | 0000000 |
Threads per Inch and Thread Pitch Identifiers
Determine threads per inch and thread pitch on a variety of external and internal threads.
Folded | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | For Threads per Inch | For Thread Pitch | No. of Identifiers | Lg. | Wd. | Manufacturer | Manufacturer Model No. | Each | |
Inch | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 | __ | 30 | 2 3/4" | 1/2" | __ | __ | 0000000 | 000000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84 | __ | 51 | 2 1/4" | 2 1/4" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 48, 50, 56, 60 | __ | 30 | 2 3/4" | 1/2" | __ | __ | 000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40 | __ | 22 | 2 3/4" | 1/2" | __ | __ | 000000 | 00000 |
Inch/Metric | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF/Metric | External/Internal | 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 28, 29, 30, 32, 34, 36, 38, 40, 42 | 0.4 mm, 0.5 mm, 0.7 mm, 0.75 mm, 0.8 mm, 0.9 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm | 51 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF/Metric | External/Internal | 4, 6, 8, 10, 11, 11 1/2, 12, 13, 16, 20, 28, 32, 40, 56 | 0.5 mm, 0.75 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm | 28 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
Metric | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | Metric | External/Internal | __ | 0.25 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.45 mm, 0.5 mm, 0.55 mm, 0.6 mm, 0.65 mm, 0.7 mm, 0.75 mm, 0.8 mm, 0.85 mm, 0.9 mm, 1 mm, 1.1 mm, 1.2 mm, 1.25 mm, 1.3 mm, 1.4 mm, 1.5 mm, 1.6 mm, 1.7 mm, 1.75 mm, 1.8 mm, 1.9 mm, 2 mm, 2.5 mm | 28 | 2 1/2" | 1/2" | Starrett | 156M | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | Metric | External/Internal | __ | 0.25 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.45 mm, 0.5 mm, 0.55 mm, 0.6 mm, 0.65 mm, 0.7 mm, 0.75 mm, 0.8 mm, 0.85 mm, 0.9 mm, 1 mm, 1.1 mm, 1.2 mm, 1.25 mm, 1.3 mm, 1.4 mm, 1.5 mm, 1.6 mm, 1.7 mm, 1.75 mm, 1.8 mm, 1.9 mm, 2 mm, 2.5 mm | 28 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | Metric | External/Internal | __ | 0.4 mm, 0.5 mm, 0.7 mm, 0.75 mm, 0.8 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm | 20 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
Pipe Size | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods | BSW | External/Internal | 4, 4 1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 40, 48, 60 | __ | 28 | 2 3/4" | 3/4" | Mitutoyo | 188-102 | 000000 | 00000 |
| Screws, Bolts, Threaded Rods | BSW | External/Internal | 4, 4 1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60, 62 | __ | 28 | 2 3/4" | 5/8" | __ | __ | 0000000 | 00000 |
Acme | |||||||||||
Stainless Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | Acme | External/Internal | 1, 1 1/3, 1 1/2, 1 3/4, 2, 2 1/2, 3, 3 1/2, 4, 5, 6, 7, 8, 9, 10, 12 | __ | 16 | 4 3/4" | 1" | __ | __ | 0000000 | 000000 |
Thread Identifier Sets
Set includes calipers and gauges to identify external and internal threads.
Container | |||||||
|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | Type | Material | Includes | Each | |
Inch, Metric, Pipe Size | |||||||
Steel | |||||||
| Screws, Bolts, Threaded Rods, Nuts, Pipe | NPT, UNC, UNF, BSPT, BSPP, Metric | External/Internal | Folding Case | Plastic | Caliper, Instruction Book, Two Steel Angle Gauges, Two Steel Gauges | 000000 | 000000 |
Acme Thread Identifiers
Identify Acme threads and use as a guide while grinding and cutting Acme threads to a 29° included angle.
| For Use With | For Thread Location | For Threads per Inch | Wd. | Ht. | Thick. | Each | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| Screws, Bolts, Threaded Rods | External | 1, 1 1/3, 1 1/2, 1 3/4, 2, 2 1/2, 3, 4, 5, 6, 7, 8, 9, 10 | 3 3/8" | 1 5/8" | 7/64" | 0000000 | 000000 |
Pipe Thread and Thread Pitch Identifiers
In addition to checking NPT and BSPT pipe sizes, use the two included gauges for measuring thread pitch.
| For Thread Type | For Pipe Size | For Gender | Wd. | Ht. | Thick. | Thread Size Identifier Material | Thread Pitch Identifier Material | Color | Each | |
| BSPT, NPT | 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Female, Male | 9" | 4 1/4" | 1/4" | Plastic | Steel | Blue | 000000 | 00000 |
Wire and Sheet Metal Size Identifiers
Read gauge numbers on one side of these identifiers and their decimal equivalents on the other.
American wire gauge identifier shows the same markings as Brown & Sharpe gauges.
U.S. steel wire gauge identifier shows the same markings as Washburn & Moen and American Steel and Wire Co. gauges.
| For Gauge Type | For Use On | For Sheet Metal Gauge | For Electrical Wire Gauge | For Steel Wire Gauge | For Wire Dia./Sheet Thick. | Dia. | Each | |
Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| U.S. Standard Iron and Steel Gauge | Iron, Steel | 36 ga., 35 ga., 34 ga., 33 ga., 32 ga., 31 ga., 30 ga., 29 ga., 28 ga., 27 ga., 26 ga., 25 ga., 24 ga., 23 ga., 22 ga., 21 ga., 20 ga., 19 ga., 18 ga., 17 ga., 16 ga., 15 ga., 14 ga., 13 ga., 12 ga., 11 ga., 10 ga., 9 ga., 8 ga., 7 ga., 6 ga., 5 ga., 4 ga., 3 ga., 2 ga., 1 ga., 0 ga. | __ | __ | 0.007", 0.0078", 0.0085", 0.0093", 0.01", 0.0109", 0.0125", 0.014", 0.0156", 0.017", 0.0187", 0.0218", 0.025", 0.028", 0.0312", 0.0343", 0.0375", 0.0437", 0.05", 0.056", 0.0625", 0.07", 0.078", 0.0937", 0.109", 0.125", 0.14", 0.156", 0.172", 0.1875", 0.203", 0.2187", 0.234", 0.25", 0.263", 0.281", 0.3125" | 3 1/4" | 0000000 | 000000 |
| American Wire Gauge | Aluminum, Brass, Copper | __ | 36 ga., 35 ga., 34 ga., 33 ga., 32 ga., 31 ga., 30 ga., 29 ga., 28 ga., 27 ga., 26 ga., 25 ga., 24 ga., 23 ga., 22 ga., 21 ga., 20 ga., 19 ga., 18 ga., 17 ga., 16 ga., 15 ga., 14 ga., 13 ga., 12 ga., 11 ga., 10 ga., 9 ga., 8 ga., 7 ga., 6 ga., 5 ga., 4 ga., 3 ga., 2 ga., 1 ga., 0 ga. | __ | 0.005", 0.0056", 0.0063", 0.007", 0.008", 0.009", 0.01", 0.011", 0.012", 0.014", 0.016", 0.018", 0.02", 0.022", 0.025", 0.028", 0.032", 0.036", 0.04", 0.045", 0.051", 0.057", 0.064", 0.072", 0.081", 0.091", 0.102", 0.114", 0.128", 0.144", 0.162", 0.182", 0.204", 0.229", 0.257", 0.289", 0.325" | 3 1/4" | 00000000 | 00000 |
| U.S. Steel Wire Gauge | Steel | __ | __ | 36 ga., 35 ga., 34 ga., 33 ga., 32 ga., 31 ga., 30 ga., 29 ga., 28 ga., 27 ga., 26 ga., 25 ga., 24 ga., 23 ga., 22 ga., 21 ga., 20 ga., 19 ga., 18 ga., 17 ga., 16 ga., 15 ga., 14 ga., 13 ga., 12 ga., 11 ga., 10 ga., 9 ga., 8 ga., 7 ga., 6 ga., 5 ga., 4 ga., 3 ga., 2 ga., 1 ga., 0 ga. | 0.007", 0.0076", 0.0086", 0.0093", 0.0101", 0.0109", 0.0125", 0.014", 0.0156", 0.0172", 0.0187", 0.0218", 0.025", 0.0281", 0.0312", 0.0348", 0.0375", 0.0437", 0.05", 0.0562", 0.0625", 0.0703", 0.0781", 0.0937", 0.1093", 0.126", 0.1406", 0.1562", 0.1718", 0.1875", 0.2031", 0.2187", 0.2343", 0.25", 0.2656", 0.2812", 0.3125" | 3 1/4" | 00000000 | 00000 |
Threads per Inch and Thread Pitch Size Checkers
Inspect fasteners and verify threads with this checker. It includes three wires for each of the pitch diameters. Select the wire that best fits the threads; then calculate the pitch diameter with the equations provided.
Wire | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | For Threads per Inch | For Thread Pitch | For Acme Threads per Inch | No. of Wires | Lg. | Material | Container | Container Material | Each | |
Inch/Metric/Acme | ||||||||||||
| Screws, Bolts, Threaded Rods, Pipe | NPT, UNC, UNF, Metric, Acme | External | 3, 3 1/2, 4, 4 1/2, 5, 5 1/2, 6, 7, 7 1/2, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40, 44, 48 | 0.5 mm, 0.6 mm, 0.7 mm, 0.75 mm, 0.8 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm | 3, 4, 5, 6, 8, 10, 12, 14, 16 | 48 | 2 3/4" | Stainless Steel | Pouch | Vinyl | 000000 | 000000 |
90° Airflow Blowguns
Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.
Air Inlet | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Nozzle Lg. | Air Consumption | Volume | Max. Inlet Pressure, psi | Pipe Size | Thread Type | Air Inlet Gender | Body Material | Nozzle Tip Material | Each | |
Straight | ||||||||||
| 12" | Not Rated | Not Rated | 120 | 1/4 | NPT | Female | Chrome-Plated Steel | Aluminum | 0000000 | 000000 |
| 24" | Not Rated | Not Rated | 120 | 1/4 | NPT | Female | Chrome-Plated Steel | Aluminum | 0000000 | 00000 |
| 36" | Not Rated | Not Rated | 120 | 1/4 | NPT | Female | Chrome-Plated Steel | Aluminum | 0000000 | 00000 |
| 48" | Not Rated | Not Rated | 120 | 1/4 | NPT | Female | Chrome-Plated Steel | Aluminum | 0000000 | 00000 |
Wet-Coating-Thickness Gauges
Measure the thickness of wet coatings such as paint. These gauges display readings in mils on one side and microns on the other side. For readings in mils, one mil equals 0.001".
For Coating Thick. | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Coating Type | Mil | Microns | Wd. | Lg. | Material | Specifications Met | Each | |
For Use On Aluminum, Copper, Plastic, Stainless Steel, Steel | ||||||||
| Nonconductive, Nonmagnetic | 1-118 | 25-3,000 | 2 5/8" | 3" | Aluminum | ASTM D4414, ISO 2808 | 000000 | 000000 |
Gear Tooth Pitch Identifiers
When replacing a gear, use these gauges to identify pressure angle, pitch, and module.
| For Gear Type | For System of Measurement | For Pitch | For Module | Number of Identifiers | Material | Each | |
For 14 1/2° Pressure Angles | |||||||
|---|---|---|---|---|---|---|---|
| Spur Gears | Inch | 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 48, 64, 80 | __ | 22 | Steel | 0000000 | 000000 |
| Spur Gears | Metric | __ | 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 2.75, 3, 3.25, 3.5, 3.75, 4, 4.5, 5 | 16 | Steel | 0000000 | 00000 |
For 14 1/2° and 20° Pressure Angles | |||||||
| Spur Gears, Bevel Gears, Helical Gears, Miter Gears | Inch | 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32 | __ | 22 | Stainless Steel | 0000000 | 000000 |
| Spur Gears, Bevel Gears, Helical Gears, Miter Gears | Metric | __ | 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8 | 26 | Stainless Steel | 0000000 | 000000 |