Attach conduit to a knockout in an outlet box or enclosure.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Join different sizes of conduit.

Ground conduit by running a ground wire through the attached lug.

Join pieces of conduit.

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Join pieces of conduit.

Connect different sizes of conduit.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Join pieces of conduit.

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

Attach conduit to a knockout in an outlet box or enclosure.

Connect different sizes of conduit.

Make tight bends in machine and equipment wiring.

Visually identify different runs of wire and cable in machine and equipment wiring.

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Also known as Type A, this conduit meets the demands of continuous motion while sealing out liquid when used with liquid-tight fittings.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Transition between types of conduit.

Often used as an alternative to cable ties, wire duct guides and organizes short runs of electrical wiring in enclosures, control panels, and machines.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

Route power, data, and control cable rated up to 600 volts AC/DC.

The triangular shape fits into corners.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.

These cable ramps handle heavy pedestrian and equipment traffic.