3/8 Conduit | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

7,488 Products

Medium-Wall (IMC) and Thick-Wall (Rigid) Steel Conduit and Fittings

Adapters for Medium-Wall (IMC) and
Thick-Wall (Rigid) Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Join pieces of conduit.

Grommets for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Reducing Washers for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Bushings for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Join different sizes of conduit.

Grounding Clamps for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Ground conduit by running a ground wire through the attached lug.

Raintight Reducing Washers for Medium-Wall
(IMC) and Thick-Wall (Rigid) Steel Conduit

Seal out moisture while reducing the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Medium-Wall (IMC) Steel Conduit

Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.

Thick-Wall (Rigid) Steel Conduit

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Rigid PVC Conduit and Fittings

Connectors for Rigid PVC Conduit

Join pieces of conduit.

Adapters for Rigid PVC Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Access Ports for Rigid PVC Conduit

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Reducing Adapters for Rigid PVC Conduit

Connect different sizes and genders of conduit.

Rigid PVC Conduit

This is also known as PVC Schedule 40 conduit.

Rigid Aluminum Conduit and Fittings

Connectors for Rigid Aluminum Conduit

Join pieces of conduit.

Adapters for Rigid Aluminum Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Bushings for Rigid Aluminum Conduit

Connect different sizes of conduit.

Rigid Aluminum Conduit

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Hazardous Location Conduit Fittings

Hazardous Location Conduit Connectors

Join pieces of conduit.

Hazardous Location Conduit Access Ports

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Hazardous Location Conduit Adapters

Attach conduit to a knockout in an outlet box or enclosure.

Hazardous Location Conduit Bushings

Connect different sizes of conduit.

Rigid Stainless Steel Conduit and Fittings

Adapters for Rigid Stainless Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Rigid Stainless Steel Conduit

Join pieces of conduit.

Rigid Stainless Steel Conduit

Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.

Thin-Wall (EMT) Conduit and Fittings

Adapters for Thin-Wall (EMT) Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Thin-Wall (EMT) Steel Conduit

Join pieces of conduit.

Grommets for Thin-Wall (EMT) Steel Conduit

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Reducers for Thin-Wall (EMT) Steel Conduit

Connect different sizes of conduit.

Thin-Wall (EMT) Steel Conduit

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Thin-Wall (EMT) Stainless Steel Conduit

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Adapters for Thin-Wall (EMT) Stainless Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Thin-Wall (EMT) Stainless Steel Conduit

Join pieces of conduit.

Adapters for Choose-a-Color
Thin-Wall (EMT) Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Choose-a-Color
Thin-Wall (EMT) Steel Conduit

Join pieces of conduit.

Choose-a-Color Thin-Wall (EMT) Steel Conduit

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

Access Ports for Metal Conduit

Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Service Entrance Weatherheads

Create a connection point to route overhead service wire and cable from utility poles to electrical meters, bringing power to buildings.

Liquid-Tight Flexible Conduit and Fittings

Fittings for Liquid-Tight Flexible Metal Conduit

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Liquid-Tight Flexible Metal Conduit

When used with liquid-tight fittings, this conduit seals out liquid. The steel core provides crush resistance, and the cover is UV light resistant.

Extreme-Temperature Liquid-Tight
Flexible Metal Conduit

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Oil-Resistant Liquid-Tight Flexible Metal Conduit

In addition to resisting oil, this conduit resists lubricants and grease.

Food Industry Liquid-Tight Flexible Metal Conduit

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Harsh Environment Liquid-Tight Flexible Metal Conduit

The toughest liquid-tight flexible metal conduit we offer, this resists oil, chemicals, and extreme temperature fluctuations.

Adapters for Liquid-Tight Flexible Plastic Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Liquid-Tight Flexible Plastic Conduit

Join pieces of conduit.

Abrasion-Resistant Liquid-Tight Flexible Plastic Conduit

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

Liquid-Tight Flexible Plastic Conduit

The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.

Flexible Conduit and Fittings

Flexible Metal Conduit

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Adapters for Flexible Metal Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Flexible Metal Conduit

Join pieces of conduit.

Adapters for Flexible Metal Conduit and Armored Cable

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Grommets for Flexible Metal
Conduit and Armored Cable

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

Flexible Metal Conduit for Fiber Optic Cable

Protect fiber optic cable with this small-diameter conduit.

Adapters for Flexible Plastic Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Flexible Plastic Conduit

Join pieces of conduit.

Grommets for Flexible Plastic Conduit

Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.

Reducers for Flexible Plastic Conduit

Connect different sizes of conduit.

Flexible Plastic Conduit

Make tight bends in machine and equipment wiring.

Crush-Resistant Flexible Plastic Conduit

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Choose-a-Color Flexible Plastic Conduit

Visually identify different runs of wire and cable in machine and equipment wiring.

Adapters for Choose-a-Color Flexible Plastic Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Choose-a-Color Flexible Plastic Conduit

Join pieces of conduit.

Clips for Flexible Plastic Conduit

Hold flexible plastic conduit in place along walls and machines.

Shielded Flexible Conduit and Fittings

Fittings for Shielded Flexible Plastic Conduit

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

Shielded Flexible Plastic Conduit

Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.

Conduit Fitting Locknuts

Locknuts for Metal Conduit Fittings

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Locknuts for Plastic Conduit Fittings

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.

Continuous-Flex Conduit and Fittings

Continuous-Flex Liquid-Tight Plastic Conduit

Also known as Type A, this conduit meets the demands of continuous motion while sealing out liquid when used with liquid-tight fittings.

Fittings for Continuous-Flex Liquid-Tight Plastic Conduit

These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.

Fittings for Continuous-Flex Plastic Conduit

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Continuous-Flex Plastic Conduit

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

Conduit Adapters

Conduit Reducing Adapters

Transition between conduit sizes and types.

Conduit Adapters

Transition between types of conduit.

Wire Duct

Slotted Wire Duct with Snap-On Cover

Often used as an alternative to cable ties, wire duct guides and organizes short runs of electrical wiring in enclosures, control panels, and machines.

Adhesive-Back Slotted Wire Duct with Snap-On Cover

Faster to install than standard slotted wire duct, attach this to flat, clean surfaces.

Narrow-Slotted Wire Duct with Snap-On Cover

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

Flexible Slotted Wire Duct

Route wire and cable around curves with this bendable wire duct.

Solid Wire Duct with Snap-On Cover

This wire duct completely encloses wire and cable.

Raceway

Low-Profile Raceway

Route power, data, and control cable rated up to 600 volts AC/DC.

Wrap-Around Low-Voltage Raceway

Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Corner-Mount Wrap-Around Low-Voltage Raceway

The triangular shape fits into corners.

Easy-Access Low-Voltage Raceway

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

Multichannel Low-Profile Raceway

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

Raceway

This raceway system is also known as wireway and wire trough.

Dust-Resistant Raceway

Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.

Corrosion-Resistant Washdown Raceway

In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.

Weather-Resistant Enclosed Trough Raceway

With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.

Oil-Tight Enclosed Trough Raceway

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Cable Ramps

Light Duty Drop-Over Interlocking Cable Ramps

Use in areas with light pedestrian traffic.

Bendable Drop-Over Interlocking Cable Ramps

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Drop-Over Interlocking Cable Ramps

These cable ramps handle heavy pedestrian and equipment traffic.

Lay-In Interlocking Cable Ramps

Lay your cable in the slit on the top so it stays off the floor.

Multichannel Interlocking Cable Ramps

Multiple channels let you separate different types of cable and cords.

Cable Ramps

Protect cable from carts, pedestrians, and other light indoor traffic.

Drive-Over Cable Ramps

These cable ramps are strong enough to withstand equipment traffic.

Wide-Span Cable Ramps

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Cable Protection Tape

Reduce tripping hazards when running cable and cords through a pedestrian area.

Corrugated Sleeving

Slit Corrugated Sleeving

A slit along the length makes this sleeving easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

High-Strength Slit Corrugated Sleeving

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

Flame-Retardant Slit Corrugated Sleeving

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

Heat-Reflective Slit Corrugated Sleeving

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Corrugated Sleeving

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

Heat-Reflective Corrugated Sleeving

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

Two-Piece Interlocking Corrugated Sleeving

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Hinged Interlocking Corrugated Sleeving

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Expandable Sleeving

High-Temperature Expandable Sleeving

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Expandable Sleeving

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Fray-Resistant Expandable Sleeving

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Interference-Shielding Expandable Sleeving

Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Flame-Retardant Expandable Sleeving

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Abrasion-Resistant Expandable Sleeving

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Duct-Rated Flame-Retardant Expandable Sleeving

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

High-Strength Expandable Sleeving

With excellent torsional strength, this sleeving withstands the extreme twisting found in robotics. It has impact strength similar to steel yet is lighter than most other sleeving materials. Stretch it to fit over items for easy installation; it tightens around its contents for a secure fit.

Slip-Resistant Expandable Sleeving

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tube Sleeving

High-Temperature Electrical-Insulating Tube Sleeving

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

Electrical-Insulating Tube Sleeving

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

Expandable Electrical-Insulating Tube Sleeving

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

Spark-Resistant Tube Sleeving

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

Extra-Thick Spark-Resistant Tube Sleeving

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Chemical-Resistant Tube Sleeving

Made of PVC, this sleeving resists chemicals, oil, and acids.

High-Temperature Tube Sleeving

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Sleeving

Abrasion-Resistant Sleeving

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

Fiberglass High-Temperature Sleeving

This sleeving withstands temperatures over 1000°F, such as in refineries.

Silica High-Temperature Sleeving

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

No-Irritation Ceramic High-Temperature Sleeving

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

Aramid High-Temperature Sleeving

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

High-Strength Sleeving

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Spiral Sleeving

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

UV-Resistant Spiral Sleeving

This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Self-Extinguishing Spiral Sleeving

Made with a self-extinguishing additive, this sleeving will not produce fumes when exposed to open flame or high temperatures. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Chemical-Resistant Spiral Sleeving

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Metal-Detectable Spiral Sleeving

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.

Wrap-Around Sleeving

Hook-and-Loop Wrap-Around Sleeving

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Wrap-Around Sleeving

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Zippered Wrap-Around Sleeving

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Hook-and-Loop Wrap-Around
Sleeving for Universal Robots

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Snap-Close Wrap-Around Sleeving

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Spark-Resistant Wrap-Around Sleeving

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Continuous-Flex Wrap-Around Sleeving

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

Interference-Shielding Wrap-Around Sleeving

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Chemical-Resistant Wrap-Around Sleeving

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Heat-Reflective Wrap-Around Sleeving

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Abrasion-Resistant Wrap-Around Sleeving

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Wrap-Around Flat Sleeving

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Wrap Sleeving

High-Temperature Wrap Sleeving

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Abrasion-Resistant Wrap Sleeving

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Conduit and Cord Grip Thread Adapters

Adapt metric, NPT, and PG conduit and cord grip threads to match knockout threads.

Cable and Hose Carriers

Lay-In Snap-Together Open Cable and Hose Carriers

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Feed-Through Snap-Together
Open Cable and Hose Carriers

Thread cable and hose through the entire length.

Low-Vibration Snap-Together
Open Cable and Hose Carriers

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

Heavy Duty Open Cable and Hose Carriers

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Any-Which-Way Enclosed Cable and Hose Carriers

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

Snap-Together Enclosed Cable and Hose Carriers

By completely surrounding the cable and hose, these carriers protect them from dirt, chips, and debris.

Accessories for Any-Which-Way
Cable and Hose Carriers

Use these accessories to mount carriers to your machinery without creating an obstruction.

Robot-Ready Cable and Hose Carrier Kits

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Cable and Hose Trays

Corrosion-Resistant Stainless Steel
Formable Cable and Hose Trays

These are the most corrosion-resistant tray systems we offer.

Zinc-Plated Steel Formable Cable and Hose Trays

The zinc plating on these tray systems offers good corrosion resistance.

Steel Formable Cable and Hose Trays

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Cable and Hose Trays

Create a system to route cable and hose by connecting components such as straight trays and tees.

Cord Bushings

More rigid than grommets, these bushings guard cords from rubbing against the edges of holes in enclosures and panels and wearing down.

Continuous-Flex Cord Bushings

A spring extension prevents sharp bends and kinks in your cord, prolonging its life. These bushings, which are more rigid than grommets, shield cords from rubbing against the edges of holes in enclosures and panels, so they won’t wear down.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Two-Line Routing Clamps

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Rail-Mount Vibration-Damping Routing Clamps

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Weld-Mount Vibration-Damping Routing Clamps

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Magnetic Vibration-Damping Routing Clamps

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Plastic Routing Clamps

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Multiline Plastic Routing Clamps

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

Snap-In Plastic Routing Clamps

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.

Chemical-Resistant Plastic Routing Clamps

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Two-Line Chemical-Resistant Plastic Routing Clamps

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Plastic Expansion Routing Clamps

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Connectable Plastic Routing Clamps

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Lock-Close Strut-Mount Plastic Routing Clamps

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Adhesive-Back Plastic Routing Clamps

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Cut-to-Length Routing Clamps

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Loop Clamps

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Multiline Loop Clamps

Plastic Loop Clamps

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Adjustable Clamping Hangers

A time-saving alternative to strap hangers, these hangers fit a range of material sizes without any cutting and easily adjust after they’re installed.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Push-to-Lock Plastic Clamping Hangers

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Plastic Clamping Hangers

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Quick-Mount Plastic Clamping Hangers

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Swivel Threaded-Rod-Mount Loop Hangers

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Roller Loop Hangers

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Pipe Cradles for Loop Hangers

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Multiline Hangers

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Strap-Mount Clamping Hangers

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

Clamping Hangers

Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.

Suspension Beams for Threaded Rod

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Hook-Mount Hangers

A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height.

Beam Clamps for Pipe, Tube, and Conduit

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Nonconductive U-Bolts

These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.

Railing Clamps

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Electrical Wiring and Connecting

Armored Building Cable

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Armored Building Cable with Uninsulated Ground Wire

This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.

Armored Building Cable with Fittings

Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.

Armored Corrosion-Resistant Cable

A braided bronze armor provides excellent protection against abrasion and other damage. The wires are tin-plated for corrosion resistance, and the insulation resists corrosive chemicals and salt water.

Wall-Mount Outlet Strips

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Grommets

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut-to-Size Grommets

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Grommet Assortments

Keep grommets of various sizes on hand to solve whatever problems arise.

Expandable Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

High-Temperature Grommets

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Locking Grommets

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Expandable Locking Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

Split Grommets

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Sealing Grommets

Wet-Location Snap-In Sealing Grommets

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Liquid-Tight Sealing Grommets

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Create-Your-Own Split Sealing Grommets

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Split Sealing Grommets

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Sealing Grommets

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Shrink-to-Fit Sealing Grommets

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Sanitary Sealing Grommets

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Furniture Grommets

Flexible Furniture Grommets

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Expandable Furniture Grommets

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Pipe and Tubing Grommets

Push-In Pipe and Tubing Grommets

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls.

Shaft Grommets

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Rolled-Rim Reinforcing Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Reinforcing Fabric Grommets

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommet Kits

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Self-Piercing Fabric Grommets

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Snap-In Fabric Grommets

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Conduit, Pipe, and Tube Benders

Multisize Conduit and Pipe Bending Blankets

Heat PVC conduit and pipe, then manually bend it to your desired angle.

Hydraulic Multisize Conduit and
Pipe Benders with Separate Pump

Powerful enough to bend conduit and pipe to the angle you need with one stroke of the pump, these are for use on Schedule 40 pipe.

Multisize Conduit and Pipe Benders

Bend more than one size of tubing without adjusting the bending head.

PVC Conduit and Pipe Hand Benders

Make on-the-fly bends in Schedule 40 PVC conduit and pipe without the risk of kinks or cracks. Lightweight and flexible, these benders are easy to keep on hand for occasional use and last-minute adjustments.

Conduit Benders

Follow the easy-to-read markings to bend conduit to the angle you need.

Conduit Benders for Offset Bends

When you're working with exposed conduit, these benders make offset bends so your conduit matches knockout holes in electrical boxes.

Conduit Benders for Tight Bends

Choose these benders for short-radius conduit bending.

Strut Channel Framing and Fittings

Strut Channel for Quick-Connect Clamps

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Strut Channel Brackets for Quick-Connect Clamps

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Welding

TIG Welding Cable Covers

Protect the cables on your TIG guns from weld spatter.

MIG Welding Cable Covers

Protect the cables on your MIG guns from weld spatter.

Vibration-Damping Grommets

Press these grommets into a hole to add cushion on both sides.

Extreme-Temperature Vibration-Damping Grommets

In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.

Extreme-Temperature Ribbed
Vibration-Damping Grommets

In addition to having a wider temperature range than our other ribbed vibration-damping grommets, these have excellent weather resistance.

Ribbed Vibration-Damping Grommets

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.

Medium-Wall (IMC) and Thick-Wall (Rigid) Steel Conduit and Fittings

Adapters for Medium-Wall (IMC) andThick-Wall (Rigid) Steel Conduit

Connectors for Medium-Wall (IMC)and Thick-Wall (Rigid) Steel Conduit

Grommets for Medium-Wall (IMC)and Thick-Wall (Rigid) Steel Conduit

Reducing Washers for Medium-Wall (IMC)and Thick-Wall (Rigid) Steel Conduit

Bushings for Medium-Wall (IMC)and Thick-Wall (Rigid) Steel Conduit

Grounding Clamps for Medium-Wall (IMC)and Thick-Wall (Rigid) Steel Conduit

Raintight Reducing Washers for Medium-Wall(IMC) and Thick-Wall (Rigid) Steel Conduit

Medium-Wall (IMC) Steel Conduit

Thick-Wall (Rigid) Steel Conduit

Rigid PVC Conduit and Fittings

Connectors for Rigid PVC Conduit

Adapters for Rigid PVC Conduit

Access Ports for Rigid PVC Conduit

Reducing Adapters for Rigid PVC Conduit

Rigid PVC Conduit

Rigid Aluminum Conduit and Fittings

Connectors for Rigid Aluminum Conduit

Adapters for Rigid Aluminum Conduit

Bushings for Rigid Aluminum Conduit

Rigid Aluminum Conduit

Hazardous Location Conduit Fittings

Hazardous Location Conduit Connectors

Hazardous Location Conduit Access Ports

Hazardous Location Conduit Adapters

Hazardous Location Conduit Bushings

Rigid Stainless Steel Conduit and Fittings

Adapters for Rigid Stainless Steel Conduit

Connectors for Rigid Stainless Steel Conduit

Rigid Stainless Steel Conduit

Thin-Wall (EMT) Conduit and Fittings

Adapters for Thin-Wall (EMT) Steel Conduit

Connectors for Thin-Wall (EMT) Steel Conduit

Grommets for Thin-Wall (EMT) Steel Conduit

Reducers for Thin-Wall (EMT) Steel Conduit

Thin-Wall (EMT) Steel Conduit

Thin-Wall (EMT) Stainless Steel Conduit

Adapters for Thin-Wall (EMT) Stainless Steel Conduit

Connectors for Thin-Wall (EMT) Stainless Steel Conduit

Adapters for Choose-a-ColorThin-Wall (EMT) Steel Conduit

Connectors for Choose-a-ColorThin-Wall (EMT) Steel Conduit

Choose-a-Color Thin-Wall (EMT) Steel Conduit

Access Ports for Metal Conduit

Access Ports for Metal Conduit

Service Entrance Weatherheads

Service Entrance Weatherheads

Liquid-Tight Flexible Conduit and Fittings

Fittings for Liquid-Tight Flexible Metal Conduit

Liquid-Tight Flexible Metal Conduit

Extreme-Temperature Liquid-TightFlexible Metal Conduit

Oil-Resistant Liquid-Tight Flexible Metal Conduit

Food Industry Liquid-Tight Flexible Metal Conduit

Harsh Environment Liquid-Tight Flexible Metal Conduit

Adapters for Liquid-Tight Flexible Plastic Conduit

Connectors for Liquid-Tight Flexible Plastic Conduit

Abrasion-Resistant Liquid-Tight Flexible Plastic Conduit

Liquid-Tight Flexible Plastic Conduit

Flexible Conduit and Fittings

Flexible Metal Conduit

Adapters for Flexible Metal Conduit

Connectors for Flexible Metal Conduit

Adapters for Flexible Metal Conduit and Armored Cable

Grommets for Flexible MetalConduit and Armored Cable

Flexible Metal Conduit for Fiber Optic Cable

Adapters for Flexible Plastic Conduit

Connectors for Flexible Plastic Conduit

Grommets for Flexible Plastic Conduit

Reducers for Flexible Plastic Conduit

Flexible Plastic Conduit

Crush-Resistant Flexible Plastic Conduit

Choose-a-Color Flexible Plastic Conduit

Adapters for Choose-a-Color Flexible Plastic Conduit

Connectors for Choose-a-Color Flexible Plastic Conduit

Clips for Flexible Plastic Conduit

Clips for Flexible Plastic Conduit

Shielded Flexible Conduit and Fittings

Fittings for Shielded Flexible Plastic Conduit

Shielded Flexible Plastic Conduit

Conduit Fitting Locknuts

Locknuts for Metal Conduit Fittings

Adapters for Medium-Wall (IMC) and
Thick-Wall (Rigid) Steel Conduit

Connectors for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Grommets for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Reducing Washers for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Bushings for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Grounding Clamps for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Raintight Reducing Washers for Medium-Wall
(IMC) and Thick-Wall (Rigid) Steel Conduit

Adapters for Choose-a-Color
Thin-Wall (EMT) Steel Conduit

Connectors for Choose-a-Color
Thin-Wall (EMT) Steel Conduit

Extreme-Temperature Liquid-Tight
Flexible Metal Conduit

Grommets for Flexible Metal
Conduit and Armored Cable