About Lubricants
More
Milling, Drilling, and Turning Coolants
Dissipate heat and prevent corrosion with these coolants that stand up to long machining cycles when milling and turning. They are chlorine free for use where chlorine waste disposal is a concern.
Use water-based coolants at full strength and apply by hand. They're sulfur free, and they won’t leave an oily residue. Do not use with magnesium.
Dilute oil-based coolants with water for use in flood coolant systems. Mineral-oil-based coolants create a milky emulsion with excellent lubricity for use with difficult-to-machine material, such as stainless steel and hard metal. Lubricants with antimist additives resist misting for a cleaner workspace. They are sulfur free. Synthetic-oil-based coolants dissipate heat rapidly in high-speed applications and are long lasting. They create a clear emulsion that won’t foam, so you can see your workpiece clearly. They resist misting for a cleaner workspace. Lubricants are sulfur free. Semisynthetic-oil-based coolants are a mix of mineral and synthetic oil for economical, long-lasting performance. They are sulfur free and are formulated for use with soft metal, such as aluminum and copper.
Container | Each | Package | ||||||
---|---|---|---|---|---|---|---|---|
Size | Type | Additive | Compatible With | Each | Pkg. Qty. | Pkg. | ||
Water Based | ||||||||
Anchor AnchorLube G-771 | ||||||||
1 gal. | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 00000000 | 000000 | 4 | 000000000 | 0000000 |
Oil Based | ||||||||
Lubricants—Mineral Base Oil | ||||||||
1 gal. | Jug | Antimist | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Iron, Nickel, Plastic, Rubber, Smoothing and Sharpening Stones, Stainless Steel, Steel, Titanium | 0000000 | 00000 | 4 | 0000000 | 000000 |
Lubricants—Synthetic Base Oil | ||||||||
1 gal. | Jug | __ | Aluminum, Cast Iron, Fiberglass, Iron, Nickel, Plastic, Rubber, Smoothing and Sharpening Stones, Stainless Steel, Steel, Titanium | 0000000 | 00000 | 4 | 0000000 | 000000 |
Lubricants—Semisynthetic Base Oil | ||||||||
1 gal. | Jug | __ | Aluminum, Brass, Cast Iron, Copper, Fiberglass, Iron, Nickel, Plastic, Rubber, Smoothing and Sharpening Stones, Stainless Steel, Steel, Titanium | 0000000 | 00000 | 4 | 0000000 | 000000 |
Milling, Drilling, and Turning Coolants for Misting Systems
Misting coolant dispensers (sold separately) use considerably less coolant than flood systems while still cooling intermittent machine cycles. Made of synthetic base oil, these coolants have excellent cooling properties to prolong tool life, are long lasting, and prevent corrosion. They inhibit bacteria growth to prevent foul odors. All are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Dilute with water.
Kool Mist Formula 78 is for use with soft metal, such as aluminum and brass, or for short jobs with hard metal. Kool Mist Formula 77 has added lubricity for tougher jobs.
Trico Tri-Cool withstands high pressure for use with hard metal, such as stainless steel and titanium, but it can be used with soft metal.
Container | ||||
---|---|---|---|---|
Size | Type | Compatible With | Each | |
Kool Mist Formula 78—Synthetic Base Oil | ||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 00000000 | 000000 |
Kool Mist Formula 77—Synthetic Base Oil | ||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
Trico Tri-Cool—Synthetic Base Oil | ||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
Container | |||||
---|---|---|---|---|---|
Size | Type | Compatible With | Pkg. Qty. | Pkg. | |
Kool Mist Formula 78—Synthetic Base Oil | |||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 4 | 000000000 | 0000000 |
Kool Mist Formula 77—Synthetic Base Oil | |||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 4 | 000000000 | 000000 |
Milling, Drilling, and Turning Coolants for Nearly Dry Machining
Apply these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Remove water-based coolants from tools and work surfaces with a mild detergent. They should not be used with magnesium.
Coolants that cannot be sold to the listed areas are restricted by product labeling requirements.
Milling, Drilling, and Turning Coolants for Micro-Drop Dispensers
Micro-drop coolant dispensers (sold separately) reduce heat with small, controlled droplets of coolant and air that dissipate heat and resist misting. Because only a small amount of coolant is used, they’re easy to clean up. Use for small jobs. They prevent corrosion and inhibit bacteria growth to prevent foul odors. They are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.
Synthetic-oil-based coolants are made with sulfur to handle demanding cuts with hard material. Vegetable-oil-based coolants are slipperier than synthetic-oil-based coolants, but they break down more quickly. They are sulfur free.
Coolants for Drill Presses
Use these lubricants with magnetic-base drill presses to cool machining cycles, improving workpiece surface finishes and extending tool life. All are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Dilute with water. Coolants are designed for use with Hougen drill presses. One 1.6-oz. bottle makes 16 oz. of coolant; one 1-gallon jug makes 11 gallons of coolant.
Container | ||||
---|---|---|---|---|
Size | Type | Compatible With | Each | |
Vegetable Base Oil | ||||
1 gal. | Jug | Steel | 0000000 | 000000 |
Sawing Coolants
Mix these coolants with water to remove heat from long machining cycles with hard metal. They prevent workpiece corrosion and distortion to improve cutting accuracy. Use them with hacksaws, circular saws, and band saws. Made with synthetic oil, coolants are long lasting and resist misting for a cleaner workspace. They are chlorine free for use where chlorine waste disposal is a concern. They are sulfur free.
Sawing Coolants for Aluminum and Copper
These sulfur-free coolants won’t react with or stain soft metal, such as aluminum or copper. Mix them with water to remove heat, prevent workpiece corrosion and distortion, and improve accuracy while cutting. Use them with power hacksaws, circular saws, and band saws. Made with semisynthetic oil, they are a mix of synthetic and mineral oil for added lubricity. They are chlorine free for use where chlorine waste disposal is a concern.
Container | ||||
---|---|---|---|---|
Size, gal. | Type | Compatible With | Each | |
Semisynthetic Base Oil | ||||
1 | Jug | Aluminum, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 000000 |
Container | |||||
---|---|---|---|---|---|
Size, gal. | Type | Compatible With | Pkg. Qty. | Pkg. | |
Semisynthetic Base Oil | |||||
1 | Jug | Aluminum, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 4 | 00000000 | 0000000 |
Grinding, Sanding, and Finishing Coolants
For general-purpose grinding, sanding, and finishing, these coolants prevent material from building up to ensure a high-quality finish and preserve tool life. All are sulfur free.
Water-based coolants won't leave an oily residue.
Dilute oil-based coolants with water. Mineral-oil-based coolants are economical for quick jobs and touch-ups. Semisynthetic-oil-based coolants are a mix of mineral and synthetic oil for extra lubricity and long-lasting performance.
Lubricants with chlorine resist high pressure and are for use with difficult-to-machine material, such as stainless steel and hard metal. Lubricants without chlorine can be used where chlorine waste disposal is a concern.
Container | Each | Package | ||||||
---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Additive | Compatible With | Each | Pkg. Qty. | Pkg. | ||
Water Based | ||||||||
1 | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 | 6 | 00000000 | 0000000 |
Oil Based | ||||||||
Mineral Base Oil | ||||||||
1 | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 | 6 | 00000000 | 000000 |
1 | Jug | Chlorine | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 0000000 | 00000 | 6 | 00000000 | 000000 |
Semisynthetic Base Oil | ||||||||
1 | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 0000000 | 00000 | 6 | 00000000 | 000000 |
Long-Life Grinding, Sanding, and Finishing Coolants
Increase the time between coolant changes—wear-resistant properties allow these coolants to perform longer than standard grinding coolants. They prevent material from building up to ensure a high-quality finish and preserve tool life. Coolants inhibit bacteria growth to prevent foul odors. They are sulfur free. Dilute with water.
Mineral-oil-based coolants have chlorine additives to handle hard metal, such as stainless steel and titanium. Semisynthetic-oil-based coolants are a mix of mineral and synthetic oil for excellent lubricity and corrosion resistance. They’re chlorine free for use where chlorine waste disposal is a concern.
Coolants for Smoothing and Sharpening Stones
These coolants prevent material buildup on smoothing and sharpening stones. They are water-based, so they’re easy to clean from workpieces. Coolants are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Container | ||||
---|---|---|---|---|
Size | Type | Compatible With | Each | |
1 gal. | Jug | Smoothing and Sharpening Stones | 00000000 | 000000 |
Coolants for Welding Water Coolers
Weld longer without damaging your torch—replace the water in your welding cooler with these coolants to prevent mineral deposits and frozen lines. Coolants also tolerate colder temperatures than water—the more ethylene glycol in the coolant, the lower temperatures it can withstand. For use with MIG, TIG, spot, and stud welders. They are nonconductive.
Container | ||||||
---|---|---|---|---|---|---|
Size, gal. | Type | Percentage of Ethylene Glycol | Welding Process | Compatible With | Each | |
Synthetic Base Oil | ||||||
1 | Jug | 17% | MIG, TIG, Spot, Stud | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
1 | Jug | 56% | MIG, TIG, Spot, Stud | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
Tapping and Threading Coolants
Designed to handle high pressure generated while tapping, threading, and reaming, these coolants dissipate heat and prevent corrosion to improve surface finishes and extend tool life. Not for use with magnesium. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Container | ||||
---|---|---|---|---|
Size | Type | Compatible With | Each | |
Tap Magic Formula 1 Aqueous | ||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | |||||
---|---|---|---|---|---|
Size | Type | Compatible With | Pkg. Qty. | Pkg. | |
Tap Magic Formula 1 Aqueous | |||||
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 2 | 00000000 | 0000000 |
Stamping and Drawing Coolants
Use these coolants in drawing, stamping, and forming applications with all metal. They protect both dies and cutting edges as well as finished workpieces. Made of synthetic oil for wear and corrosion resistance. Coolants leave a residue that can be removed with water-based cleaners. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Dilute with water.
Container | ||||
---|---|---|---|---|
Size, gal. | Type | Compatible With | Each | |
Synthetic Base Oil | ||||
1 | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 000000 |
Container | |||||
---|---|---|---|---|---|
Size, gal. | Type | Compatible With | Pkg. Qty. | Pkg. | |
Synthetic Base Oil | |||||
1 | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 6 | 00000000 | 0000000 |
Milling, Turning, and Sawing Lubricants
These lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. They are chlorine free for use where chlorine waste disposal is a concern.
Lubricants with sulfur resist high pressure and are for use with difficult-to-machine material, such as stainless steel and hard metal.
Lubricants for use with cast iron, stainless steel, and steel will stain other metal. Use them at full strength or blended with other oil.
Apply Cool Tool II directly to your cutting tool. Use at full strength.
Use LPS Tapmatic lubricants at full strength. Tapmatic Natural is based on natural oil. It’s designed for use on steel and aluminum, but can be used on all metal. It is sulfur free.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Each | Package | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Additive | Compatible With | Cannot Be Sold To | Each | Pkg. Qty. | Pkg. | ||
Cool Tool II | |||||||||
16 fl. oz. | Jug | Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | CA, Canada | 00000000 | 000000 | 12 | 000000000 | 0000000 |
1 gal. | Jug | Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | CA, Canada | 00000000 | 00000 | 2 | 000000000 | 000000 |
LPS Tapmatic #1 Gold | |||||||||
1 gal. | Jug | Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 000000 | 4 | 00000000 | 000000 |
LPS Tapmatic Natural | |||||||||
1 gal. | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 000000 | 4 | 00000000 | 000000 |
Lubricants | |||||||||
1 gal. | Jug | Sulfur | Cast Iron, Stainless Steel, Steel | __ | 0000000 | 00000 | 6 | 00000000 | 000000 |
Milling, Turning, and Sawing Lubricants for Stainless Steel
A high sulfur concentration provides the lubricity required to protect tools and stainless steel work surfaces, but these lubricants will stain other metal. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Use alone or blend with other oil.
Milling, Turning, and Sawing Lubricants for Aluminum and Copper
Also known as plumber's lard oil, these light-colored, sulfur-free lubricants won't stain soft metal, such as aluminum or copper. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.
Food Industry Milling, Turning, and Sawing Lubricants
For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Container | |||||
---|---|---|---|---|---|
Size, gal. | Type | Specifications Met | Compatible With | Each | |
1 | Jug | NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 000000 |
Container | ||||||
---|---|---|---|---|---|---|
Size, gal. | Type | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
1 | Jug | NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 6 | 00000000 | 0000000 |
Tapping and Threading Lubricants
Use these lubricants for easier and faster tapping, cutting, and threading of hard and thick material. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Use at full strength.
Lubricants with sulfur and lubricants with chlorine handle high pressure.
Relton Rapid Tap resists misting for a cleaner workspace.
Container | |||||
---|---|---|---|---|---|
Size | Type | Additive | Compatible With | Each | |
Relton Rapid Tap | |||||
1 gal. | Jug | Chlorine, Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | ||||||
---|---|---|---|---|---|---|
Size | Type | Additive | Compatible With | Pkg. Qty. | Pkg. | |
Relton Rapid Tap | ||||||
1 gal. | Jug | Chlorine, Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 4 | 00000000 | 0000000 |
Tap Magic ProTap won’t change the appearance of soft metal, such as aluminum. It is chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use Tap Magic Xtra Thick when making deep cuts in hard metal, such as stainless steel and titanium—it clings to tool surfaces and stays in place at high speeds. It is chlorine free, for use where chlorine waste disposal is a concern, and sulfur free.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||
---|---|---|---|---|---|---|
Size | Type | Additive | Compatible With | Cannot Be Sold To | Each | |
Tap Magic EP-Xtra | ||||||
1 gal. | Jug | Chlorine, Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | CA, Canada | 0000000 | 000000 |
Tap Magic ProTap | ||||||
1 gal. | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | __ | 00000000 | 00000 |
Tap Magic Xtra Thick | ||||||
1 gal. | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | __ | 0000000 | 000000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Type | Additive | Compatible With | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Tap Magic EP-Xtra | |||||||
1 gal. | Jug | Chlorine, Sulfur | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | CA, Canada | 2 | 00000000 | 0000000 |
Tap Magic ProTap | |||||||
1 gal. | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | __ | 2 | 000000000 | 000000 |
Tap Magic Xtra Thick | |||||||
1 gal. | Jug | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | __ | 2 | 00000000 | 000000 |
Use Ridgid lubricants to cut external threads into pipe. They’re chlorine free, for use where chlorine waste disposal is a concern, and halogen free. They’re often used with Ridgid pipe and conduit threaders. Ridgid Endura-Clear extends the life of dies and other thread-cutting tools. It’s chemically compatible with products in the FBC System Compatible Program. Use Ridgid Extreme Performance on hard metal such as stainless steel.
Tapping and Threading Lubricants for Aluminum and Copper
Formulated for use on soft metal, such as aluminum, copper, and brass, these sulfur-free lubricants won’t stain. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free for use where chlorine waste disposal is a concern. They cannot be sold to the regions listed due to local regulatory limits on on VOCs (volatile organic compounds). Use at full strength.
Electrical Discharge Machining Lubricants
These electrical discharge machining (EDM) lubricants resist oxidation, so they last longer and extend the life of your electrode. They're clear for workpiece visibility. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Grinding, Sanding, and Finishing Lubricants for Glass
Apply these lubricants to abrasive belts and wheels to extend their life and improve ground glass surface finishes. They lubricate the abrasive surface for faster and easier cutting cycles. These sulfur-free lubricants won’t stain metal, so they can be used as general purpose grinding fluids. They are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.
Machine Tool Coolant Biocides
Inhibit the growth of bacteria and fungi in your machine-tool reservoir to improve coolant effectiveness and eliminate the cause of foul odors. Add this low-foaming formula to coolant for use during operation or when the machine is shut down for complete maintenance. It cannot be sold outside the United States due to product registration requirements.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Type | Container Size, gal. | Composition | Harshness | For Use On | For Removing | Features | Cannot Be Sold To | Each | |
Liquid Concentrate | |||||||||
Jug | 1 | Solvent Based | Harsh | Coolant | Bacteria, Odors | Low Foaming | Outside United States | 0000000 | 0000000 |
Machine Tool Coolant Anti-Foaming Liquids
Add these liquids to your machine-tool reservoir to reduce foam in coolant systems and keep them running smoothly.
Container | Each | |||||||
---|---|---|---|---|---|---|---|---|
Type | Size, fl. oz. | Composition | Harshness | For Use On | For Removing | 1-3 | 4-Up | |
Liquid | ||||||||
Jug | 64 | Solvent Based | Mild | Coolant | Foam | 000000 | 000000 | 000000 |
Machine Tool Coolant Cleaners
Remove oily residue, soap deposits, and heavy soils from your machine-tool reservoir without harming paints, coatings, seals, and hoses.
Low-foaming cleaners can be used with fully synthetic coolants, but they aren’t as strong as other coolant cleaners.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Type | Size, gal. | Composition | Harshness | For Use On | For Removing | For Coolant Base Oil | Features | Each | |
Liquid Concentrate | |||||||||
Jug | 1 | Water Based | Moderate | Coolant | Dirt, Grease/Oil, Soap Scum | Mineral, Semisynthetic, Vegetable | __ | 000000 | 000000 |
Jug | 1 | Water Based | Moderate | Coolant | Dirt, Grease/Oil, Soap Scum | Mineral, Semisynthetic, Synthetic, Vegetable | Low Foaming | 00000000 | 00000 |
Heavy Duty Deodorizers
Chemically neutralize and eliminate harmful acidic or alkaline gases, such as hydrogen sulfide and ammonia. These deodorizers are often used in machine coolant, cutting fluids, wastewater, and trash collection areas. Use full strength, or dilute and use as a spray.
Deodorizers in the 77-fl. oz. jug are extra strength and low foaming for use in sludge treatment.
Heat Transfer Fluids
Use these fluids in heat exchangers and liquid chillers.
Ethylene glycol and propylene glycol fluids are for use in closed (nonvented) systems. Propylene glycol is safer to handle than ethylene glycol.
Container | |||||
---|---|---|---|---|---|
Size | Type | Color | Temp. Range, °F | Each | |
Ethylene Glycol | |||||
0.5 gal. | Jug | Clear | -60° to 250° | 0000000 | 000000 |
1 gal. | Jug | Clear | -60° to 250° | 0000000 | 00000 |
2.5 gal. | Jug | Clear | -60° to 250° | 0000000 | 000000 |
Propylene Glycol | |||||
0.5 gal. | Jug | Clear | -50° to 250° | 0000000 | 00000 |
1 gal. | Jug | Clear | -50° to 250° | 0000000 | 00000 |
2.5 gal. | Jug | Clear | -50° to 250° | 0000000 | 000000 |
Quenching Oil
For controlled cooling, use quenching oil instead of water to minimize cracking and distortion after heat treating parts and tools. It's nonstaining and chlorine and sulfur free. Use full strength.