Join pieces of conduit.

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Ground conduit by running a ground wire through the attached lug.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Connect different sizes of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Connect different sizes of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Attach conduit to a knockout in an outlet box or enclosure.

Join pieces of conduit.

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Transition between types of conduit.

This raceway system is also known as wireway and wire trough.

In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.

Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

Often used as an alternative to cable ties, wire duct guides and organizes short runs of electrical wiring in enclosures, control panels, and machines.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

These cable ramps handle heavy pedestrian and equipment traffic.

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Multiple channels let you separate different types of cable and cords.

These cable ramps are strong enough to withstand equipment traffic.

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

This sleeving withstands temperatures over 1000°F, such as in refineries.

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

A specially formulated silicone rubber coating allows this sleeving to stretch to twice its relaxed ID to fit over items during installation; it then tightens around its contents for a secure fit.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

A slit along the length makes this sleeving easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.