System of Measurement System of Measurement |
---|
|
For Knockout Trade Size For Knockout Trade Size |
---|
|
Thread Size Thread Size | Show |
---|
|
Thread Size Thread Size | Hide |
---|
For Cord OD Range For Cord OD Range |
---|
|
Cord Holding Type Cord Holding Type |
---|
![]() | ![]() |
Bushing | Screw-Down Clamp |
![]() | ![]() |
Break-Through Seal | Heat Shrink |
For Maximum Cord OD For Maximum Cord OD |
---|
For Cord Shape For Cord Shape |
---|
|
Knockout Connection Type Knockout Connection Type |
---|
![]() | Threaded |
Environment Environment |
---|
|
Mounting Location Mounting Location |
---|
![]() | Knockout |
Flexibility Flexibility |
---|
|
Specifications Met Specifications Met |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Environmental Rating Environmental Rating |
---|
Connection Type Connection Type |
---|
![]() | ![]() |
Conduit | Cord Grip |
![]() | |
Electrical Box |
These grips are sized to fit in tight areas. They are rated IP68 and 69K for protection from continuous submersion and high-pressure, high-temperature jets of water. They are also rated NEMA 4X, 6, and 12 for indoor and outdoor protection against corrosion, water projected from a hose, and dripping oils and lubricants. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
For Cord OD | For Knockout Trade Size | Thread Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
NPT Threads | |||||||||
---|---|---|---|---|---|---|---|---|---|
0.51"-0.79" | 1 | 1 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CSA Certified, UL 746C f1, UL 94 V-0, UL Listed | 00000000 | 00000 |
0.71"-0.98" | 1 | 1 | Black Nylon Plastic | -20° to 210° | Nylon Plastic Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CSA Certified, UL 746C f1, UL 94 V-0, UL Listed | 00000000 | 0000 |
Made of nylon with a nylon mesh extension, these grips resist most chemicals. The mesh provides a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for long cable life. Grips are rated NEMA 6P for protection from dirt, corrosion, water projected from a hose, and continuous submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
For Cord OD | For Knockout Trade Size | Mesh Lg. | Thread Type | Temp. Range, °F | Features | Specifications Met | Each | |
0.75"-0.88" | 1 | 8" | NPT | -40° to 225° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 0000000 | 000000 |
0.88"-1" | 1 | 7 1/8" | NPT | -40° to 225° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 0000000 | 00000 |
Made of nylon with a nylon mesh extension, these grips resist most chemicals. The mesh provides a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for long cable life. Grips are rated NEMA 6P for protection from dirt, corrosion, water projected from a hose, and continuous submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
For technical drawings and 3-D models, click on a part number.
For Cord OD | For Knockout Trade Size | Mesh Lg. | Thread Type | Temp. Range, °F | Features | Specifications Met | Each | |
0.75"-0.88" | 1 | 8" | NPT | -40° to 225° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 0000000 | 0000000 |
0.88"-1" | 1 | 7 1/8" | NPT | -40° to 225° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 0000000 | 000000 |
Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from continuous submersion. They are nickel plated for good corrosion resistance. A rubber bushing and O-ring create a tight seal to prevent liquid from entering your connection.
IP69K rated grips provide protection from high-pressure, high-temperature washdowns.
For technical drawings and 3-D models, click on a part number.
For Cord OD | For Knockout Trade Size | Thread Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
NPT Threads | ||||||||
---|---|---|---|---|---|---|---|---|
0.51"-0.79" | 1 | 1 | -20° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CSA Certified, UL Listed, UL 94 V-0 | 0000000 | 000000 |
0.71"-0.98" | 1 | 1 | -20° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | IP68, IP69K, NEMA 4X, NEMA 6, NEMA 12 | CSA Certified, UL Listed, UL 94 V-0 | 0000000 | 00000 |
For technical drawings and 3-D models, click on a part number.
These cord grips are lightweight yet durable. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Knockout Connection | Each | Locknut and O-Ring Kits | ||||||||
For Cord OD | For Knockout Trade Size | Type | Gender | Temperature Range, °F | Specifications Met | 1-9 | 10-Up | Each | ||
NPT Threads | ||||||||||
0.38"-0.5" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 000000 | 000000 | 0000000 | 00000 |
0.5"-0.63" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.63"-0.75" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.75"-0.88" | 1 | Threaded | Female | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 000000 | 00 |
0.75"-0.88" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.88"-0.97" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.88"-1" | 1 | Threaded | Female | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 000000 | 00 |
1"-1.1" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
1.13"-1.25" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
1.25"-1.38" | 1 | Threaded | Male | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
For technical drawings and 3-D models, click on a part number.
These cord grips are lightweight yet durable. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | |||||||||
---|---|---|---|---|---|---|---|---|---|
Each | Locknut and O-Ring Kits | ||||||||
For Cord OD | For Knockout Trade Size | Thread Type | Temperature Range, °F | Specifications Met | 1-9 | 10-Up | Each | ||
0.5"-0.63" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 000000 | 000000 | 0000000 | 00000 |
0.63"-0.75" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.75"-0.88" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.88"-0.97" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
1"-1.1" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
A mesh extension provides a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life. A plastic bushing seals out dust and dirt.
For technical drawings and 3-D models, click on a part number.
Mesh | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Lg. | Material | Thread Type | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
0.7"-0.97" | 1 | 9 1/4" | Steel | NPT | -40° to 220° F° | Zinc-Plated Steel Locknut | NEMA 1 | UL Listed, CSA Certified | 0000000 | 000000 |
For technical drawings and 3-D models, click on a part number.
Made of nylon, these grips resist chemicals. They have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | |||||||||
---|---|---|---|---|---|---|---|---|---|
Each | Locknut and O-Ring Kits | ||||||||
For Cord OD | For Knockout Trade Size | Thread Type | Temperature Range, °F | Specifications Met | 1-9 | 10-Up | Each | ||
0.38"-0.5" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 000000 | 000000 | 0000000 | 00000 |
0.5"-0.63" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.63"-0.75" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.75"-0.88" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.88"-0.97" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
1"-1.1" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
For technical drawings and 3-D models, click on a part number.
Made of nylon, these grips resist chemicals. They have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Each | Locknut and O-Ring Kits | |||||||||
For Cord OD | For Knockout Trade Size | Thread Type | Temperature Range, °F | Environmental Rating | Specifications Met | 1-9 | 10-Up | Each | ||
0.63"-0.75" | 1 | NPT | -30° to 225° | NEMA 4X, NEMA 13, IP66 | UL Listed, CSA Certified | 00000000 | 000000 | 000000 | 0000000 | 00000 |
0.75"-0.88" | 1 | NPT | -30° to 225° | NEMA 4X, NEMA 13, IP66 | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.88"-0.97" | 1 | NPT | -30° to 225° | NEMA 4X, NEMA 13, IP66 | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
For technical drawings and 3-D models, click on a part number.
Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Cord Grips | |||||||||
---|---|---|---|---|---|---|---|---|---|
Each | Locknut and O-Ring Kits | ||||||||
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Specifications Met | 1-9 | 10-Up | Each | ||
0.5"-0.63" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 0000000 | 000000 | 000000 | 0000000 | 00000 |
0.63"-0.75" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.75"-0.88" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
0.88"-0.97" | 1 | NPT | -30° to 225° | UL Listed, CSA Certified | 00000000 | 00000 | 00000 | 0000000 | 0000 |
For technical drawings and 3-D models, click on a part number.
Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid. The inner rings are colored by size so you can identify them at a glance.
Locknut and O-ring kits (sold separately) create liquid-tight seals between cord grips and enclosure knockouts. Rated NEMA 4X, NEMA 13, and IP66, the resulting seals provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray. Each kit includes two locknuts and two O-rings—enough to seal two cord grips.
Tighten the screws to secure building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes.
For technical drawings and 3-D models, click on a part number.
For Trade Size | Each | |||||||
---|---|---|---|---|---|---|---|---|
Max. Hole Dia. | Conduit | Knockout | Material | Features | Specifications Met | 1-19 | 20-Up | |
1.04" | 1 | 1 | Zinc | Zinc Locknut | UL Listed, CSA Certified | 0000000 | 00000 | 00000 |
Made of nylon, these grips resist chemicals. Install them in panels and enclosures—they have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the enclosure. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.
Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | 1-9 | 10-Up | |
0.38"-0.5" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 000000 | 000000 |
0.5"-0.63" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
0.63"-0.75" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
Also known as cable-entry seals, the cable-entry side has heat-shrinkable polyolefin with an adhesive lining. Use a heat gun to melt the lining; the adhesive bonds to your cable to form a liquid-tight, fume-tight seal. Grips have a two-piece design—the pieces screw into each other to save space inside your enclosure.
For technical drawings and 3-D models, click on a part number.
Cord Seal ID | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Min. After Shrinking | Before Shrinking | Thread Size | Thread Type | Shrink Temp., °F | Temp. Range, °F | Material | Includes | Specifications Met | Each | |
0.17" | 0.5" | 1 | UNF | 250° | -65° to 190° F° | Black Nylon Plastic | Male Electrical Box Adapter | SAE AS81765/1 Type 1 | 0000000 | 000000 |
0.25" | 0.75" | 1 | UNF | 250° | -65° to 190° F° | Black Nylon Plastic | Male Electrical Box Adapter | SAE AS81765/1 Type 1 | 0000000 | 00000 |
These stainless steel grips offer the most protection from wet, corrosive environments of any of our metal liquid-tight cord grips. A rubber bushing and O-ring seal out dirt, moisture, coolant, and corrosive fumes. They are rated IP67 for protection from temporary water submersion.
For technical drawings and 3-D models, click on a part number.
Cord Grips | Stainless Steel Locknuts | ||||||||
---|---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | Each | Each | ||
0.44"-0.56" | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 000000 | 000000 | 000000 |
0.56"-0.69" | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 00000 | 000000 | 00000 |
0.69"-0.81" | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 00000 | 000000 | 00000 |
0.75"-0.87" | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 00000 | 000000 | 00000 |
0.81"-0.94" | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 00000 | 000000 | 00000 |
0.88"-1" | 1 | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 00000 | 000000 | 00000 |
A mesh extension offers a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for long cable life. These grips are stainless steel for the most protection from wet, corrosive environments of any of our metal liquid-tight cord grips. A rubber bushing and O-ring to seal out dirt, moisture, coolant, and corrosive fumes. They are rated IP67 for protection from temporary water submersion.
For technical drawings and 3-D models, click on a part number.
Cord Grips | Stainless Steel Locknuts | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Mesh Lg. | Thread Type | Temp. Range, °F | Features | Specifications Met | Each | Each | ||
0.44"-0.56" | 1 | 7 3/8" | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 0000000 | 000000 | 000000 |
0.56"-0.69" | 1 | 9 1/8" | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 000000 | 000000 | 00000 |
0.69"-0.81" | 1 | 9 7/8" | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 000000 | 000000 | 00000 |
0.75"-0.87" | 1 | 9 7/8" | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 000000 | 000000 | 00000 |
0.81"-0.94" | 1 | 9 3/4" | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 000000 | 000000 | 00000 |
0.88"-1" | 1 | 9 3/4" | NPT | -40° to 250° | Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed | 0000000 | 000000 | 000000 | 00000 |
These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.
Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | 1-9 | 10-Up | |
0.38"-0.5" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 000000 | 000000 |
0.5"-0.63" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
0.63"-0.75" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.
Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | 1-9 | 10-Up | |
0.5"-0.63" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 0000000 | 000000 | 000000 |
Stronger than aluminum cord grips, these steel grips are zinc plated for corrosion resistance. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection. All are rated NEMA 4X, NEMA 13, and IP66 to provide indoor and outdoor protection against dust, corrosion, water projected from a hose, and oil/coolant spray.
Grips have a knurled collar for hand tightening. As you tighten the grip, a nylon inner ring and lubricated rubber bushing secure your cable, prevent overtightening, and create a seal around the cord to block out liquid.
For technical drawings and 3-D models, click on a part number.
Each | ||||||||
---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | 1-9 | 10-Up | |
0.5"-0.63" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 000000 | 000000 |
0.63"-0.75" | 1 | NPT | -30° to 225° | Nylon Plastic Inner Ring, Rubber O-Ring, Zinc-Plated Steel Locknut | UL Listed, CSA Certified | 00000000 | 00000 | 00000 |
These grips meet Class III, Divisions 1 and 2 standards for use in hazardous locations. They have a mesh extension for a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life.
For technical drawings and 3-D models, click on a part number.
Mesh | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Lg. | Material | Thread Type | Material | Cord Holding Type | Bushing Material | Temp. Range, °F | Features | Environmental Rating | Each | |
0.5"-0.63" | 1 | 4 5/8" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
0.63"-0.75" | 1 | 5 3/4" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 00000 |
0.75"-0.88" | 1 | 6" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
0.88"-0.97" | 1 | 6 1/4" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
1"-1.1" | 1 | 5 5/8" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
These grips meet Class III, Divisions 1 and 2 standards for use in hazardous locations. They have a mesh extension for a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life.
For technical drawings and 3-D models, click on a part number.
Mesh | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cord OD | For Knockout Trade Size | Lg. | Material | Thread Type | Material | Cord Holding Type | Bushing Material | Temp. Range, °F | Features | Environmental Rating | Each | |
0.5"-0.63" | 1 | 4 5/8" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 0000000 |
0.63"-0.75" | 1 | 5 3/4" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
0.75"-0.88" | 1 | 6" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
0.88"-0.97" | 1 | 6 1/4" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
1"-1.1" | 1 | 5 5/8" | Stainless Steel | NPT | Aluminum | Bushing | Rubber | -30° to 240° | Rubber O-Ring, Zinc-Plated Steel Locknut | NEC Class III Divisions 1, 2 | 0000000 | 000000 |
Grips have a rubber inner grommet with multiple holes and a rubber O-ring that create a tight seal to prevent liquid from entering the connection. They are rated IP65 for protection from water projected from a nozzle and NEMA 4X for indoor and outdoor protection against corrosion and water projected from a hose.
Nylon is chemical resistant.
For technical drawings and 3-D models, click on a part number.
For Cord OD | For Knockout Trade Size | Thread Type | Temp. Range, °F | Features | Specifications Met | Each | |
Black Nylon Plastic | |||||||
---|---|---|---|---|---|---|---|
For 4 Cords | |||||||
0.31"-0.35" | 1 | NPT | -40° to 210° | Rubber O-Ring, Nylon Locknut | UL Recognized, CSA Certified | 0000000 | 000000 |
0.33"-0.37" | 1 | NPT | -40° to 210° | Rubber O-Ring, Nylon Locknut | UL Recognized, CSA Certified | 0000000 | 00000 |
For 6 Cords | |||||||
0.22"-0.26" | 1 | NPT | -40° to 210° | Rubber O-Ring, Nylon Locknut | UL Recognized, CSA Certified | 0000000 | 00000 |
Nickel-Plated Brass | |||||||
For 4 Cords | |||||||
0.31"-0.35" | 1 | NPT | -40° to 210° | Rubber O-Ring, Nickel-Plated Brass Locknut | UL Recognized, CSA Certified | 0000000 | 00000 |
For 6 Cords | |||||||
0.22"-0.26" | 1 | NPT | -40° to 210° | Rubber O-Ring, Nickel-Plated Brass Locknut | UL Recognized, CSA Certified | 0000000 | 00000 |
Also known as cable entry seals, the cable-entry side has heat-shrinkable polyolefin with an adhesive lining. Use a heat gun to melt the lining; the adhesive bonds to your cable to form a liquid-tight, fume-tight seal. Grips have a two-piece design—the pieces screw into each other to save space inside your enclosure.
For technical drawings and 3-D models, click on a part number.
Cord Seal ID | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Total No. of Cords | Min. After Shrinking | Before Shrinking | Thread Size | Thread Type | Shrink Temp., °F | Temp. Range, °F | Material | Includes | Each | |
3 | 0.11" | 0.4" | 1 | UNF | 250° | -65° to 190° | Black Nylon Plastic | Male Electrical Box Adapter | 0000000 | 000000 |
These grips have a thin, flexible seal that covers the holes until you push cords through. They prevent liquid from entering your connections—grips are rated IP68 for protection from continuous submersion.
For technical drawings and 3-D models, click on a part number.
For Cord OD | For Knockout Trade Size | Thread Type | Material | Seal Material | Temp. Range, °F | Features | Specifications Met | Each | |
For 5 Cords | |||||||||
---|---|---|---|---|---|---|---|---|---|
0.24"-0.3" | 1 | NPT | Black Nylon Plastic | Rubber | 0° to 210° | Steel Locknut | UL Listed, CSA Certified | 0000000 | 00000 |
For 9 Cords | |||||||||
0.17"-0.22" | 1 | NPT | Black Nylon Plastic | Rubber | 0° to 210° | Steel Locknut | UL Recognized, C-UL Recognized | 0000000 | 0000 |
Adapt metric, NPT, and PG conduit and cord grip threads to match knockout threads. A rubber O-ring seals out moisture.
For technical drawings and 3-D models, click on a part number.