Protect externally threaded components from contaminants during fabrication and storage.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.

Exposure to rain, snow, and wet conditions won't damage these corrosion-resistant boxes.

Rain, snow, and wet conditions won't damage these corrosion-resistant covers.

Add depth to your weatherproof outlet box.

Close off unused switches and outlets.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.

Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.

These enclosures have internal slots to hold circuit boards in place.

Snap these enclosures onto 35 mm DIN rail and lock them in place.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Lighter in weight than steel and brass grips, these aluminum grips are strong enough to secure cords in demanding wet environments.

With an oval bushing hole, these lightweight grips secure flat building cable, such as Romex and Festoon cable, in wet areas. All offer strain relief to extend cable life.

Create a tight grip on cords in wet environments while reducing stress from bending—the 90° angle of these cord grips routes cords to fit tight spaces in enclosures and panels.

Secure cords in wet and industrial environments with little room—these grips curve 45° to relieve bending stress.

The mesh extension provides a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life.

Connect a single flat cable to a junction box.

These 90° elbows meet Class III, Divisions 1 and 2 standards for use in hazardous locations.

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges.

Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

No need for clamps or connectors—duct and fittings have a male end that is slightly smaller than its female end for simple assembly.

For use with gas-fired equipment, such as boilers and furnaces, these vent pipes and fittings withstand temperatures up to 400° F. Also known as type B gas vents.

These thresholds have a seal to provide protection from the elements. With a ribbed top, they offer more slip resistance than smooth-top thresholds.

An antislip coating adds another layer of slip resistance to these thresholds.

In addition to making a transition between flooring surfaces, thresholds are often used to reduce the gap between a door and the floor.

Adjustable slats offer light control and privacy.

Keep bugs out of your space without blocking airflow.

Choose these guards if you need door knob guards that each open with a different key.

Choose these guards if you need several door handle guards that open with the same key.

Protect mini connectors when not in use.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Also known as Pressure Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

Convert your drums into a covered waste container.

Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.

This nosing has an integral anchor for installation in fresh concrete stairs; no additional fasteners required.

Slide a sign into the side of these holders.

These holders come with a cover to protect signs from smudging and wear.

Secure ceiling tiles or join ceiling tile frame components.

Insert these one-piece grooved liners between vise jaws to hold small-diameter material vertically.

Place over the jaws and tighten the screws to securely attach liners.