For Finish For Finish |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Lubrication Lubrication |
|---|
|
Stone Shape Stone Shape |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Finishing
More
Two-Grit Sharpening Stones
A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved.
Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.
Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.
Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
Ceramic alumina is extremely hard and wear resistant.
For stones that require lubrication, we recommend using a water-soluble or oil-based lubricant.
For technical drawings and 3-D models, click on a part number.
Stone | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Each | |
Aluminum Oxide × Aluminum Oxide | ||||||
| 3" | 1 1/2" | 1/2" | 100 (Smooth) × 320 (Extra Smooth) | Required × Required | 000000 | 000000 |
| 4" | 1 3/4" | 5/8" | 100 (Smooth) × 320 (Extra Smooth) | Oil Filled × Oil Filled | 000000 | 00000 |
| 6" | 2" | 1" | 100 (Smooth) × 320 (Extra Smooth) | Oil Filled × Oil Filled | 000000 | 00000 |
| 8" | 2" | 1" | 100 (Smooth) × 320 (Extra Smooth) | Oil Filled × Oil Filled | 000000 | 00000 |
| 11 1/2" | 2 1/2" | 1" | 100 (Smooth) × 320 (Extra Smooth) | Oil Filled × Oil Filled | 000000 | 00000 |
Aluminum Oxide × Novaculite | ||||||
| 6" | 2" | 1" | 100 (Smooth) × 600 (Polished) | Oil Filled × Required | 0000000 | 00000 |
Silicon Carbide × Aluminum Oxide | ||||||
| 6" | 2" | 1" | 150 (Smooth) × 320 (Extra Smooth) | Oil Filled × Oil Filled | 0000000 | 00000 |
| 11 1/2" | 2 1/2" | 1" | 150 (Smooth) × 320 (Extra Smooth) | Oil Filled × Oil Filled | 0000000 | 000000 |
Silicon Carbide × Silicon Carbide | ||||||
| 4" | 1 3/4" | 5/8" | 100 (Smooth) × 280 (Extra Smooth) | Oil Filled × Oil Filled | 0000000 | 00000 |
| 6" | 2" | 1" | 100 (Smooth) × 280 (Extra Smooth) | Oil Filled × Oil Filled | 0000000 | 00000 |
| 8" | 2" | 1" | 100 (Smooth) × 280 (Extra Smooth) | Oil Filled × Oil Filled | 0000000 | 00000 |
| 11 1/2" | 2 1/2" | 1" | 100 (Smooth) × 280 (Extra Smooth) | Oil Filled × Oil Filled | 0000000 | 00000 |
Novaculite × Novaculite | ||||||
| 4" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
| 6" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 00000 |
| 8" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 000000 |
| 10" | 2" | 1/2" | 400 (Extra Smooth) × 800 (Polished) | Required × Required | 0000000 | 000000 |
Ceramic Alumina × Ceramic Alumina | ||||||
| 5" | 1" | 1/4" | 600 (Polished) × 1800 (Polished) | Not Required × Not Required | 0000000 | 00000 |
Single-Grit Sharpening Stones
Quickly sharpen straight-blade tools.
Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.
Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.
Ceramic alumina is extremely hard and wear resistant.
Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.
For stones that require lubrication, we recommend using a water-soluble or oil-based lubricant..
For technical drawings and 3-D models, click on a part number.
Stone | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Lubrication | Choose a Grit (For Finish) | Each | |
Rectangular | ||||||
Aluminum Oxide | ||||||
| 3" | 7/8" | 3/8" | Required | 220 (Extra Smooth) | 0000000 | 000000 |
| 4" | 1" | 1/4" | Oil Filled | 0000000 | 00000 | |
| 4" | 1" | 1/2" | Oil Filled | 0000000 | 00000 | |
| 5" | 2" | 5/8" | Oil Filled | 0000000 | 00000 | |
| 6" | 2" | 1" | Oil Filled | 0000000 | 00000 | |
| 8" | 2" | 1" | Oil Filled | 0000000 | 00000 | |
Silicon Carbide | ||||||
| 4" | 1" | 1/4" | Oil Filled | 0000000 | 00000 | |
| 4" | 1" | 1/2" | Oil Filled | 0000000 | 00000 | |
| 5" | 2" | 5/8" | Oil Filled | 0000000 | 00000 | |
| 6" | 2" | 1" | Oil Filled | 0000000 | 00000 | |
| 8" | 2" | 1" | Oil Filled | 0000000 | 00000 | |
Ceramic Alumina | ||||||
| 8" | 2" | 1/2" | Not Required | 000000 | 000000 | |
Novaculite | ||||||
| 3" | 1" | 3/8" | Required | 600 (Polished) | 0000000 | 00000 |
| 3" | 1" | 3/8" | Required | 800 (Polished) | 0000000 | 00000 |
| 4" | 1" | 3/8" | Required | 600 (Polished) | 0000000 | 00000 |
| 4" | 1" | 3/8" | Required | 800 (Polished) | 0000000 | 00000 |
| 4" | 2" | 3/4" | Required | 0000000 | 00000 | |
| 6" | 2" | 3/4" | Required | 0000000 | 00000 | |
| 8" | 2" | 3/4" | Required | 0000000 | 00000 | |
| 10" | 2" | 3/4" | Required | 0000000 | 000000 | |
Three-Grit Sharpening Stones with Oil Reservoir
Rotate the stone to use three different grit surfaces. The reservoir in the base keeps them clean and oiled. First sharpen your blade with a lower grit, then sharpen again with progressively finer (higher) grits until the desired edge is achieved.
Sharpening Stones | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stone | Repl. 100 Grit Stones | Repl. 150 Grit Stones | Repl. 320 Grit Stones | |||||||||
| Lg. | Wd. | Thick. | Grit (For Finish) | Includes | Each | Each | Each | Each | ||||
Rectangular | ||||||||||||
Silicon Carbide × Silicon Carbide × Aluminum Oxide | ||||||||||||
| 6" | 2" | 1/2" | 100 (Smooth) × 150 (Smooth) × 320 (Extra Smooth) | 4 oz. Oil | 000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 11 1/2" | 2 1/2" | 1/2" | 100 (Smooth) × 150 (Smooth) × 320 (Extra Smooth) | 16 oz. Oil | 000000 | 000000 | 000000 | 00000 | 000000 | 00000 | 000000 | 00000 |
Three-Grit Sharpening Stones
Three separate grit surfaces enables multistep sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with progressively finer (higher) grits until the desired edge is achieved.
Stone | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Grit (For Finish) | Lubrication | Includes | Each | |
Rectangular | |||||||
Silicon Carbide × Novaculite × Novaculite | |||||||
| 6" | 1 5/8" | 1/2" | 150 (Smooth) × 600 (Smooth) × 800 (Extra Smooth) | Required × Required × Required | 1 oz. Oil | 0000000 | 000000 |
Two-Grit Hand-Held Sharpening Stones
A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved. The silicon carbide abrasive cuts quickly with light pressure. Also known as Crystolon stones.
We recommend using a water-soluble or oil-based lubricant for the rectangular stones.
Stone | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Color | Grit (For Finish) | Lubrication | Overall Lg. | Handle Material | Each | |
Silicon Carbide × Silicon Carbide | |||||||||
| 10" | 1 1/4" | 3/4" | Dark Gray × Dark Gray | 100 (Smooth) × 280 (Extra Smooth) | Recommended × Recommended | 14 3/4" | Wood | 0000000 | 000000 |
Stone | ||||||
|---|---|---|---|---|---|---|
| Dia. | Thick. | Color | Grit (For Finish) | Lubrication | Each | |
Silicon Carbide × Silicon Carbide | ||||||
| 4" | 1 1/2" | Dark Gray × Gray | 120 (Smooth) × 280 (Extra Smooth) | Not Required × Not Required | 000000 | 000000 |
Single-Grit Hand-Held Sharpening Stones
Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones. We recommend using a water-soluble or oil-based lubricant.
Boron carbide lasts up to 10 times longer than silicon carbide. These stones have a magnifier built into the handle.
Stone | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Color | Lubrication | Overall Lg. | Handle Material | Features | Choose a Grit (For Finish) | Each | |
Rectangular | ||||||||||
Silicon Carbide | ||||||||||
| 10" | 1 1/4" | 3/4" | Dark Gray | Recommended | 14" | Wood | Tapered End | 100 (Smooth) | 0000000 | 000000 |
| 10" | 1 1/4" | 3/4" | Dark Gray | Recommended | 14 3/4" | Wood | __ | 150 (Smooth) | 0000000 | 00000 |
Boron Carbide | ||||||||||
| 1 5/8" | 1/2" | 1/8" | Dark Gray | Not Required | 7" | Plastic | 2X Magnifier | 000000 | 00000 | |
Fast-Cutting Smoothing Stones
Also known as Crystolon stones, these abrade quickly to create a smooth or extra-smooth finish on molds and dies. These stones can be used by hand or in power tools with a compatible holder. Choose the shape that best matches the contour of your work surface. We recommend using a water-soluble or oil-based lubricant with stones that are not oil filled.
For technical drawings and 3-D models, click on a part number.
Stones | Hand-Held Stone Holders | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Grit (For Finish) | Lg. | Wd. | Thick. | Color | Lubrication | Each | Each | ||
Silicon Carbide—For Use On Steel | |||||||||
| 150 (Smooth) | 4" | 1/4" | 1/4" | Gray | Recommended | 0000000 | 00000 | 00000000 | 00000 |
| 150 (Smooth) | 4" | 3/8" | 3/8" | Gray | Recommended | 0000000 | 0000 | 000000 | 00 |
| 150 (Smooth) | 4" | 1/2" | 1/2" | Gray | Oil Filled | 0000000 | 00000 | 000000 | 00 |
| 280 (Extra Smooth) | 4" | 1/4" | 1/4" | Black | Recommended | 0000000 | 0000 | 00000000 | 0000 |
| 280 (Extra Smooth) | 4" | 3/8" | 3/8" | Black | Recommended | 0000000 | 0000 | 000000 | 00 |
| 280 (Extra Smooth) | 4" | 1/2" | 1/2" | Black | Oil Filled | 0000000 | 00000 | 000000 | 00 |
| Grit (For Finish) | Lg. | Wd. | Color | Lubrication | Each | |
Silicon Carbide—For Use On Steel | ||||||
|---|---|---|---|---|---|---|
| 150 (Smooth) | 4" | 1/4" | Gray | Recommended | 0000000 | 000000 |
| 150 (Smooth) | 4" | 3/8" | Gray | Recommended | 0000000 | 00000 |
| 150 (Smooth) | 4" | 1/2" | Gray | Recommended | 0000000 | 00000 |
| 280 (Extra Smooth) | 4" | 1/4" | Black | Recommended | 0000000 | 00000 |
| 280 (Extra Smooth) | 4" | 3/8" | Black | Recommended | 0000000 | 00000 |
| 280 (Extra Smooth) | 4" | 1/2" | Black | Recommended | 0000000 | 00000 |
| Grit (For Finish) | Lg. | Dia. | Color | Lubrication | Each | |
Silicon Carbide—For Use On Steel | ||||||
|---|---|---|---|---|---|---|
| 150 (Smooth) | 4" | 1/4" | Gray | Oil Filled | 0000000 | 000000 |
| 150 (Smooth) | 4" | 3/8" | Gray | Recommended | 0000000 | 00000 |
| 150 (Smooth) | 4" | 1/2" | Gray | Recommended | 0000000 | 00000 |
| 280 (Extra Smooth) | 4" | 1/4" | Black | Oil Filled | 0000000 | 00000 |
| 280 (Extra Smooth) | 4" | 3/8" | Black | Recommended | 0000000 | 00000 |
| 280 (Extra Smooth) | 4" | 1/2" | Black | Recommended | 0000000 | 00000 |