Use these disposable cups for beverages.

Scoop, measure, and pour without fear of contaminating your food line. A metal additive in the plastic can be picked up by a metal detector, and a chemical additive will show up on X-ray, so you can find them if they fall into your line.

These beakers are more durable than other glass beakers.

Mix and melt small quantities of powders and chemicals.

The bellows on these cups handle items with varied heights and angles better than flat cups.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

These cups are made of FDA listed silicone rubber to withstand the extreme temperatures in food processing applications.

Lift smooth items, such as glass, plastic, and sheet metal without leaving marks.

These cups maintain their grip even as contents shift and the bag changes shape during lifting.

The bellows on these cups handle items with varied heights and angles better than flat cups.

The bellows on these cups handle items with varied heights and angles better than flat cups.

These cups are made of FDA listed silicone rubber to withstand the extreme temperatures in food processing applications.

Press these cups onto unthreaded fittings on your vacuum system to pick up sanitary items with curves, corners, and uneven surfaces.

Connect these fittings to a vacuum cup and compressed air source to create a vacuum generating system.

With multiple suction ports, these lifters can grip, lift, and move large items with a variety of surfaces.

Grip, lift, and move food as well as other items with curves, angles, and varied heights in food-processing plants. All of these lifters have a flexible balloon-like cup that’s made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Stick these adapters onto Non-Contact Vacuum Lifters to create a soft area for your workpiece to touch while it’s in motion.

These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms.

Able to rotate 360° and flex to 45°, these fittings help vacuum cups grip items that are positioned at an angle.

Switch out worn vacuum pads with these replacements.

Push down to create a vacuum and grip your items.

A built-in pump generates more suction for lifting and holding heavier items than push-grip lifters.

Reach into large tanks and vats with these dippers with handles from 36" to 144" long.

Made from PTFE plastic, these dippers are more chemical resistant than other plastic dippers.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

Connect a tube fitting and tubing to the dispenser outlet to access hard-to-reach lubrication points.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush to create a dispenser.

Serve multiple lubrication points from a single location.

For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced.

Tighten the cover to dispense grease.

Turn the metering pin to adjust flow rate.

These U-cup seals create less friction than O-ring-loaded U-cups, so they wear more slowly. Also known as lip seals, U-cups have a sealing lip on both the inside and outside edges, so they can be used for rod and piston sealing.

Also known as loaded-lip seals and PolyPaks, an O-ring secures these U-cups to the rod or piston for better sealing performance at lower pressures than unsupported U-cup seals.

Organize bottles of various shapes and sizes.

Stick the suction cup to a smooth, nonporous surface to temporarily hang lightweight items.

Install these fittings into threaded holes.

Aluminum cups are more durable than plastic cups. Keep extras ready for easy color changes while spraying.

Pour paint, lacquer, and resin through these strainers to remove lumps, flakes, dust, and other contaminants for a smooth finish.