Capacity Capacity | Show |
|---|
|
Capacity Capacity | Hide |
|---|
Flow Control Flow Control |
|---|
|
Power Source Power Source |
|---|
|
For Use With For Use With |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Bowl Type Bowl Type |
|---|
|
Pressure Regulation Pressure Regulation |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Oil Outlet Connection Type Oil Outlet Connection Type |
|---|
|
Housing Material Housing Material |
|---|
|
Flow Adjustment Mechanism Flow Adjustment Mechanism |
|---|
|
Oil Reservoirs
Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.
Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.
Reservoirs with removable filter prevent valve blockage.
For Max. Viscosity | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Each | |
3/8 NPTF Male Outlet | |||||||||||
| 2 qt. | 5 1/2" | 9 15/16" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 0000000 |
1/2 NPTF Male Outlet | |||||||||||
| 2 qt. | 5 1/2" | 10 1/8" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 000000 |
For Max. Viscosity | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Each | |
1/2 NPT Male Outlet | ||||||||||
| 2 qt. | 5" | 11 1/16" | Plastic | Vented | 150 | 90W | 700 | 4 | 0000000 | 000000 |
For Max. Viscosity | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Wire Mesh Material | Removes Particle Size Down To | Each | |
1/2 NPT Male Outlet | ||||||||||||
| 2 qt. | 5" | 11 1/16" | Plastic | Vented | 150 | 90W | 700 | 4 | 304 Stainless Steel | 149 microns | 0000000 | 000000 |
Remote-Access Oil Dispensers with Flow-Adjustment Valve
Connect a tube fitting and tubing (not included) to the dispenser outlet to access hard-to-reach lubrication points. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
For Max. Viscosity | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Includes | Each | |
1/8 NPTF Female Outlet | |||||||||||||||
| 2 qt. | 5 1/2" | 12 3/16" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 320 | 90 | 1,500 | 6 | Glass Flow Sight | Nut, Washer | 0000000 | 0000000 |
Oil Dispensers with Flow-Adjustment Valve
Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
For Max. Viscosity | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Each | |
160° F Max. Temp. | ||||||||||||
1/2 NPTF Male Outlet | ||||||||||||
| 2 qt. | 5 1/2" | 12 1/16" | Aluminum | Plastic | Vented | 320 | 90 | 1,500 | 6 | Glass Flow Sight | 0000000 | 0000000 |
250° F Max. Temp. | ||||||||||||
1/2 NPTF Male Outlet | ||||||||||||
| 2 qt. | 5 1/2" | 12 1/16" | Aluminum | Glass | Vented | 320 | 90 | 1,500 | 6 | Glass Flow Sight | 0000000 | 000000 |
| Replacement Glass Sights for 3" to 5 1/2" Bowl Dia. | 000000 | Each | 00000 |
Multiple-Outlet Oil Dispensers with Flow-Adjustment Valves
Serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Change the reservoir flow by turning the dial on the bowl. Flip the lever to start and stop flow to all of the valves at once. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Each | |
2 Outlets—For 1/4" Tube OD | |||||||||||
| 2 qt. | 5 1/2" | 14 1/16" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 0000000 |
4 Outlets—For 1/4" Tube OD | |||||||||||
| 2 qt. | 5 1/2" | 14 1/16" | 5 7/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||
| 2 qt. | 5 1/2" | 14 1/16" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
Build-Your-Own Multiple-Outlet Oil Dispensers with Flow-Adjustment Valves
Customize these dispensers to serve up to 24 lubrication points from a single location. Dispensers come with two flow-adjustment valves and can accommodate up to 24 valves total. Additional valves are sold separately. Valves thread together to make a sealed connection. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Flip the lever to start and stop flow to all of the valves at once.
Overall | For Max. Viscosity | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Each | |
2 Outlets—For 1/4" Tube OD | ||||||||||||||
| 2 qt. | 5" | 14 1/8" | 3 15/16" | Plastic | Vented | 225° | 5/8"-18 | 150 | 90W | 700 | 4 | Vented Glass Sight | 0000000 | 0000000 |
| Additional Flow-Adjustment Valve | 0000000 | Each | 000000 |
Multiple-Outlet Electrically Operated Oil Dispensers with Flow-Adjustment Valves
Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Wire Connection Type | Electrical Connection Type | Each | |
120V AC 0.1A Current | |||||||||||||
2 Outlets—For 1/4" Tube OD | |||||||||||||
| 2 qt. | 5 1/2" | 11 3/4" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Wire Leads | Hardwire | 0000000 | 0000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||||
| 2 qt. | 5 1/2" | 11 3/4" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Wire Leads | Hardwire | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||||
| 2 qt. | 5 1/2" | 11 3/4" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Wire Leads | Hardwire | 0000000 | 000000 |
24V DC 0.4A Current | |||||||||||||
2 Outlets—For 1/4" Tube OD | |||||||||||||
| 2 qt. | 5 1/2" | 11 3/4" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Wire Leads | Hardwire | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||||
| 2 qt. | 5 1/2" | 11 3/4" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Wire Leads | Hardwire | 0000000 | 000000 |
Electrically Operated Oil Dispensers with Flow-Adjustment Valve
A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.