Use these disposable cups for beverages.

Water bottles have a flip-up lid for convenient use.

These beakers stand up to the most aggressive chemicals as well as temperatures up to 500° F.

Mix and melt small quantities of powders and chemicals.

Pails are often used in food-processing applications.

This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.

Mix and store noncorrosive flammable liquids, such as paints and lacquers.

Hold objects or materials for transport or pouring.

Use these cups with a vacuum system to grip, lift, and move flat materials, such as sheet metal and plastic.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

Pick up long, narrow items in your sanitary facility with these cups—they connect to threaded fittings on your vacuum system.

Lift smooth items, such as glass, plastic, and sheet metal without leaving marks.

These cups maintain their grip even as contents shift and the bag changes shape during lifting.

The bellows on these cups handle items with varied heights and angles better than flat cups.

The bellows on these cups handle items with varied heights and angles better than flat cups.

Press these cups onto unthreaded fittings on your vacuum system to pick up sanitary items with curves, corners, and uneven surfaces.

Press these cups onto unthreaded fittings on your vacuum system to pick up bread, pastries, and other soft material.

With multiple suction ports, these lifters can grip, lift, and move large items with a variety of surfaces.

The flexible balloon-like cup on these lifters use compressed air to grip, lift, and move items with curves, angles, and varied heights.

Connect these fittings to a vacuum cup and compressed air source to create a vacuum generating system.

These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms.

These lifters have multiple cups to grip, lift, and move large food items as well as other objects with curves, angles, and varied heights in food-processing plants. All of the cups are made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Able to rotate 360° and flex to 45°, these fittings help vacuum cups grip items that are positioned at an angle.

Connect these pads to your vacuum system to lift and move textured items that standard vacuum cups can’t pick up.

Push down to create a vacuum and grip your items.

For a strong, continuous grip, these lifters have levers to lock them in place.

Reach into large tanks and vats with these dippers with handles from 36" to 144" long.

Each dipper comes individually bagged and sterilized.

Connect a tube fitting and tubing to the dispenser outlet to access hard-to-reach lubrication points.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Serve multiple lubrication points from a single location.

Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.

A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

A needle dispensing tip provides fine control for lubricating small parts.

These dispensers have an opening for filling without removing the nozzle.

Tighten the cover to dispense grease.

Turn the metering pin to adjust flow rate.

Quickly lubricate bearings.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Rated for pressure up to 10,000 psi, these leather U-cups handle over 80 times more pressure than our Buna-N U-cups.

Also known as loaded-lip seals and PolyPaks, an O-ring secures these U-cups to the rod or piston for better sealing performance at lower pressures than unsupported U-cup seals.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

These baskets have a fine nylon mesh construction and plastic frame.

Organize bottles of various shapes and sizes.

For use on smooth, nonporous surfaces, these load-rated hooks have a pump to create a strong vacuum for hanging heavier items than standard vacuum hooks.

Install these fittings into threaded holes.