Hold one buffing or polishing wheel on each spindle.

Eliminate swirl marks without damaging painted surfaces. Use with polishing bonnets. Also known as random-orbital polishers.

Before you buff, use these bonnets for easy application of waxes and polishes.

Remove buildup and fluff packed-down bonnets to extend their life.

The edge of the wheel is tapered for polishing joints, grooves, and crevices.

Use these rigid wheels to remove gouges and scratches from metal workpieces.

Made from alternating strips of cotton and sisal, these wheels remove less material, leave fewer scratches, and conform better to curves and contours than flat-surface wheels. Also known as finger-style buffs.

Layers of cloth are sewn together, making these wheels more rigid than those for curved surfaces.

Specially shaped to buff the insides of metal pipes, cylinders, stampings, and tapered objects.

Pleats hold more buffing compound so you can work longer before having to reapply. The cotton is also cut at an angle to prevent fraying and extend wheel life.

The layers of flannel are sewn together, making these wheels more rigid than those for curved surfaces. Also known as Canton flannel buffs.

Washable and reusable, these pads are good for buffing and polishing painted and clear-coat finishes.

Shaped for use on inside cylinders or on irregular surfaces.

Remove minor scratches, scuffs, cloudy surfaces, and hard water etching from glass or plastic.

These bobs have a long-lasting diamond abrasive.

Apply a layer of compound by holding one of these bars against a revolving buffing wheel.

Remove surface scale left by the EDM (electrical discharge machining) process.

Each of these sets comes with four differently shaped stones.

Also known as Crystolon stones, these abrade quickly to create a smooth or extra-smooth finish.

The aluminum oxide abrasive, which has blunt edges, won't clog the hone, especially when used with honing oil.

These hones have a long-lasting diamond abrasive.

Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.

This film abrades quickly and prevents material buildup.

This fast-lapping paste abrades quickly to produce a level, scratch-free surface.

Denser and more wear-resistant than traditional lapping compounds.

Second only to diamond in hardness, the boron carbide abrasive produces a level, scratch-free surface on hard metals.

The abrasive won’t embed in soft metals, preventing scratches and material buildup on your work surface.

Use during lapping to prevent your paste from drying.

The abrasive in these blocks wears evenly to maintain a flat surface. They can be used to remove burrs from metal die fixtures and machine parts or to clean magnetic chucks.

The backing cushions the abrasive to prevent gouging your work surface.

Often used as the final step after other media, this type of media is also good for use on fragile parts and won't contaminate nonferrous materials.

Use for heavy deburring and blending grind lines.

This nonabrasive media leaves a very shiny surface.

Remove tarnish, oxidation, and light scratches from parts with fine detail or engraving.

Also called pad drivers, these are required to hold pads in place.

The two halves of this attachment have spikes to sandwich the pad and keep it from slipping off center.

Use these pads with high-speed floor burnishers to polish hard floors to a high-gloss finish.

This cleaner gets into tight spots, such as corners and behind toilets. It can also be used to clean baseboards and stairs.

Super soft suede-like cloth polishes surfaces without scratching and removes fine dirt.

Loosely woven from 100% purified cotton, this silicone-free cloth is low linting and won't scratch.