Place the magnetic base on metal surfaces for a solid mount. The base has a V-grooved bottom for mounting on flat and curved surfaces and magnetic release switch for easy setups.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

The contact point is located on the back of this indicator, which allows the dial face to be read from above. It has a continuous dial numbered clockwise around the face for direct measurements.

Sets include a contact point adapter, swivel clamp, hole attachment, and mounting accessories.

Use these indicators near magnetic chucks and other equipment with a magnetic field. Sets include a contact point adapter, swivel clamp, hole attachment, and mounting accessories.

For direct measurements, these indicators have a continuous dial numbered clockwise around the face.

Take direct and comparative measurements with the same indicator. The combination dial has both a continuous scale numbered clockwise around the face and a balanced scale with positive values on one side of the zero and negative values on the other side.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

Place the magnetic base on metal surfaces for a solid mount.

Mount these indicators to a lathe tool post or a height gauge with the included attachment, also known as a universal shank.

Sets include attachments for indicator mounting.

Sets include attachments for indicator mounting.

Measure internal surfaces that standard contact points can’t reach. These adapters transfer the up and down motion of the contact point 90° to a second contact point that moves left to right.

Cut one of these stickers to show your desired tolerance limits, and affix it to the face of an indicator to quickly see if a part is in or out of tolerance.

Remove the spindle cap on your Mitutoyo indicator and install a lever for easier lifting of the indicator spindle.

Use different colored caps to code indicators by calibration date, precision, or other specifications.

Adjust the flexible arm to nearly any position.

The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces.

Use a swivel clamp to attach an indicator to the positioning arm.

These holders come with a calibration certificate traceable to NIST states that the granite base has passed a test for surface accuracy. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.

Adjust the flexible arm to nearly any position.

Attach the C-clamp on these holders to your milling machine head to take indicator measurements without obstructing the cutting tool.

Adjust the flexible arm to nearly any position.

Vise-grip locking pliers clamp these holders to most thin, flat surfaces, and the flexible arm lets you position your indicator around obstructions.

Measure the inside diameter of holes and cylindrical bores, as well as identify out-of-roundness problems.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These calipers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Carbide-tipped jaws provide greater wear resistance and longer life when measuring abrasive or very hard materials.

Attach to electronic, dial, and vernier calipers to measure slots, inside pockets, shoulders, and holes.

These sets come with calibration certificates traceable to NIST that state the tools have passed a test for accuracy.

These sets come with calibration certificates traceable to NIST that state the tools have passed a test for accuracy.

In addition to the dial, two mechanical analog counters display measurements (one counts up; the other counts down).

The small dial on these gauges allows for installation in tight spaces.

Keep tabs on liquid levels in pump and tank applications with these gauges—a dual scale displays pressure in feet of H₂O and psi.

Read your pressure from a distance with these large-dial gauges.

A liquid-filled dial reduces needle flutter for precise readings in high-vibration applications.

These gauges have a red needle that indicates the highest pressure reached since the last setting. They have a liquid-filled dial that reduces needle flutter for precise readings in high-vibration applications.

Gauges have an accuracy of ± 0.5% to ± 1%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.

These gauges have a unique case design that eliminates the air bubble on the dial face, which can distort readings.

Gauges have an accuracy of ± 2%.

Designed for use with boilers, these gauges measure pressure and temperature simultaneously.

Use these gauges to monitor the pressure of compressed gas.

These gauges have a liquid-filled dial that reduces needle flutter in high-vibration applications reaching 2,000 psi.

Use in high-pressure applications up to 2,000 psi.

A liquid-filled dial reduces needle flutter in high-vibration food-processing applications.

The case and connection threads are stainless steel for protection in corrosive environments.

A glycerin-filled dial reduces needle flutter for precise readings in high-vibration applications.

Also known as compound gauges, these measure both pressure and vacuum.

A 304 stainless steel case coupled with 316 stainless steel connection threads provide protection from corrosive environments.

Often used with chillers and in refrigeration systems, these gauges display the temperature of ammonia relative to the pressure measurement.

Measure small changes in air pressure with these gauges. They are commonly used to indicate clogged filters and to monitor fans and blowers.

All-stainless steel construction makes these gauges suitable for testing and calibrating in corrosive environments.

Test and calibrate transmitters, gauges, and other equipment that measures pressure.

Two chain clamps position two test indicators at different points along a shaft to find any misalignment.

Monitor process temperature with these thermometers that install directly into threaded tank and pipe connections.

An extra-long stem extends into deep tanks and hard-to-reach areas.

Ensure reliable readings with these thermometers. They come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

The included calibration certificate traceable to NIST states that these thermometers have passed a test for accuracy, and the silicone-filled dial keeps the pointer from fluttering in high-vibration environments.

For accurate readings in high-vibration environments, these thermometers have a silicone-filled dial that keeps the pointer from fluttering.

In addition to showing current surface temperature, these thermometers have pointers to indicate the minimum and maximum temperatures since the last reading.

Check the surface temperature of tanks, generators, annealing ovens, boilers, and other metallic equipment.

Attach these thermometers to the rims of tanks, trays, vats, and other containers.

For mounting on instrument and control panels, these thermometers have a back flange.

Monitor temperature in freezers, coolers, and storage areas with these thermometers.