Filter by
Abrasive Material
Tooth Style
For Use On
Head Diameter
Head Length
Grit Rating
Surface Texture
Tip Style
For Use With
Rotation Speed
Maximum Rotation Speed
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Performance
Long-Life Grinding Bits for Nonmetals
 |  |  |  |  |  |  |  |  |
Style 1 | Style 2 | Style 3 | Style 4 | Style 5 | Style 6 | Style 7 | Style 8 | Style 9 |
Cylinder
|
Style 1 |
|
Style 3 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Overall Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, and Glass | ||||||||||
1/8" Diameter Shank | ||||||||||
| 1 | 0.03" | 0.08" | 100,000 | Diamond | 2 1/4" | 220 (Extra Smooth) Silver | 4376A11 | 000000 | ||
| 1 | 0.03" | 0.19" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A75 | 00000 | ||
| 1 | 0.04" | 0.08" | 100,000 | Diamond | 2 1/4" | 220 (Extra Smooth) Silver | 4376A12 | 00000 | ||
| 1 | 0.04" | 0.19" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A76 | 00000 | ||
| 1 | 0.05" | 0.08" | 100,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A13 | 00000 | ||
| 1 | 0.05" | 0.19" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A77 | 00000 | ||
| 1 | 0.06" | 0.12" | 100,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A31 | 00000 | ||
| 1 | 0.06" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A14 | 00000 | ||
| 1 | 0.07" | 0.12" | 100,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A15 | 00000 | ||
| 1 | 0.08" | 0.16" | 100,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A16 | 00000 | ||
| 1 | 0.08" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A15 | 00000 | ||
| 1 | 0.09" | 0.16" | 100,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A17 | 00000 | ||
| 1 | 0.1" | 0.16" | 100,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A18 | 00000 | ||
| 1 | 0.11" | 0.16" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A19 | 00000 | ||
| 1 | 0.12" | 0.16" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A21 | 00000 | ||
| 1 | 0.13" | 0.2" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A22 | 00000 | ||
| 1 | 0.13" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A17 | 00000 | ||
| 1 | 0.14" | 0.2" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A23 | 00000 | ||
| 1 | 0.16" | 0.2" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A24 | 00000 | ||
| 1 | 0.16" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A79 | 00000 | ||
| 1 | 0.19" | 0.31" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A21 | 00000 | ||
| 1 | 1/4" | 0.03" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A53 | 00000 | ||
| 1 | 1/4" | 0.06" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A55 | 00000 | ||
| 1 | 1/4" | 0.13" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A57 | 00000 | ||
| 1 | 1/4" | 1/4" | 100,000 | Diamond | 2" | 150 (Smooth) Silver | 4490A107 | 00000 | ||
| 1 | 1/4" | 0.31" | 46,500 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A23 | 00000 | ||
| 1 | 1/4" | 1/2" | 100,000 | Diamond | 2" | 150 (Smooth) Silver | 4490A108 | 00000 | ||
| 1 | 0.31" | 0.31" | 46,500 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A66 | 00000 | ||
| 1 | 3/8" | 1/8" | 40,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A106 | 00000 | ||
| 1 | 3/8" | 1/4" | 90,000 | Diamond | 2" | 150 (Smooth) Silver | 4490A109 | 00000 | ||
| 1 | 3/8" | 3/8" | 90,000 | Diamond | 2" | 150 (Smooth) Silver | 4490A111 | 00000 | ||
| 3 | 0.14" | 0.31" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A65 | 00000 | ||
1/4" Diameter Shank | ||||||||||
| 1 | 0.06" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A11 | 00000 | ||
| 1 | 0.09" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A78 | 00000 | ||
| 1 | 0.13" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A13 | 00000 | ||
| 1 | 0.19" | 0.31" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A16 | 00000 | ||
| 1 | 0.2" | 0.24" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A28 | 00000 | ||
| 1 | 0.24" | 0.28" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A27 | 00000 | ||
| 1 | 1/4" | 0.31" | 46,500 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A18 | 00000 | ||
| 1 | 0.26" | 0.28" | 60,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A41 | 00000 | ||
| 1 | 0.31" | 0.31" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A19 | 00000 | ||
| 1 | 0.32" | 0.32" | 30,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A42 | 00000 | ||
| 1 | 0.34" | 0.32" | 30,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A43 | 00000 | ||
| 1 | 0.38" | 0.31" | 46,500 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A22 | 00000 | ||
| 1 | 0.39" | 0.39" | 30,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A44 | 00000 | ||
| 1 | 1/2" | 1/4" | 70,000 | Diamond | 2" | 150 (Smooth) Silver | 4490A112 | 00000 | ||
| 1 | 1/2" | 0.31" | 30,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A24 | 00000 | ||
| 1 | 1/2" | 1/2" | 70,000 | Diamond | 2" | 150 (Smooth) Silver | 4490A113 | 00000 | ||
| 1 | 0.59" | 0.39" | 20,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A46 | 00000 | ||
| 1 | 0.73" | 0.39" | 20,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4376A47 | 00000 | ||
Barrel
| | |
Style 2 | Style 4 | Style 9 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Overall Lg. | Grit (Surface Texture) | Each | |||
For Grout, Carbide, Ceramics, and Glass | ||||||||||
1/8" Diameter Shank | ||||||||||
| 4 | 3/32" | 5/16" | 40,000 | Diamond | 2 1/2" | 120 (Smooth) Silver | 4490A101 | 000000 | ||
1/4" Diameter Shank | ||||||||||
| 9 | 3/32" | 5/16" | 40,000 | Diamond | 2 1/2" | 120 (Smooth) Silver | 4490A102 | 00000 | ||
| 9 | 3/16" | 5/16" | 40,000 | Diamond | 2 1/2" | 120 (Smooth) Silver | 4490A103 | 00000 | ||
For Carbide, Ceramics, and Glass | ||||||||||
1/8" Diameter Shank | ||||||||||
| 2 | 0.06" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A68 | 00000 | ||
| 2 | 0.13" | 1/4" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A34 | 00000 | ||
| 2 | 1/4" | 0.31" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A36 | 00000 | ||
| 2 | 0.31" | 0.31" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A67 | 00000 | ||
| 4 | 0.06" | 0.31" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A71 | 00000 | ||
| 4 | 0.08" | 0.31" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A72 | 00000 | ||
| 4 | 0.11" | 0.31" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A64 | 00000 | ||
1/4" Diameter Shank | ||||||||||
| 2 | 0.38" | 0.31" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A25 | 00000 | ||
| 2 | 1/2" | 0.31" | 30,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A26 | 00000 | ||
Flat-Top Cone
|
Style 8 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Overall Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, and Glass | ||||||||||
1/4" Diameter Shank | ||||||||||
| 8 | 0.19" | 0.1" | 18,600 | Diamond | 2" | 120 (Smooth) Silver | 4490A29 | 000000 | ||
| 8 | 1/4" | 0.1" | 18,600 | Diamond | 2" | 120 (Smooth) Silver | 4490A31 | 00000 | ||
| 8 | 1/2" | 0.2" | 30,000 | Diamond | 2" | 120 (Smooth) Silver | 4490A32 | 00000 | ||
Taper
|
Style 5 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Overall Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, and Glass | ||||||||||
1/8" Diameter Shank | ||||||||||
| 5 | 5/32" | 5/8" | 40,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A105 | 000000 | ||
| 5 | 0.16" | 0.23" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A59 | 00000 | ||
| 5 | 0.17" | 0.14" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A58 | 00000 | ||
| 5 | 0.19" | 0.38" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A61 | 00000 | ||
Ball
| |
Style 6 | Style 7 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Overall Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, and Glass | ||||||||||
1/8" Diameter Shank | ||||||||||
| 6 | 0.06" | 0.06" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A42 | 000000 | ||
| 6 | 0.09" | 0.09" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A44 | 00000 | ||
| 6 | 0.13" | 0.13" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A45 | 00000 | ||
| 6 | 0.19" | 0.19" | 96,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A46 | 00000 | ||
| 6 | 1/4" | 1/4" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A47 | 00000 | ||
| 6 | 0.38" | 0.38" | 46,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A49 | 00000 | ||
| 7 | 1/32" | 1/32" | 40,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A104 | 00000 | ||
1/4" Diameter Shank | ||||||||||
| 6 | 1/2" | 1/2" | 30,000 | Diamond | 2 1/4" | 120 (Smooth) Silver | 4490A27 | 00000 | ||
Miniature Long-Life Grinding Bits for Nonmetals
 |  |  |  |  |
Style 1 | Style 2 | Style 3 | Style 4 | Style 5 |
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs. To extend the life of these bits and improve their finish, use a water- or oil-soluble mist or coolant. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Cylinder
|
Style 3 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, Composites, Fiberglass, Glass, Plastic, and Rubber | ||||||||||
3/32" Diameter Shank | ||||||||||
| 3 | 0.094" | 0.157" | 25,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N12 | 000000 | ||
| 3 | 0.181" | 0.157" | 25,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N11 | 00000 | ||
 |
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Inverted Cone
|
Style 1 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, Composites, Fiberglass, Glass, Plastic, and Rubber | ||||||||||
3/32" Diameter Shank | ||||||||||
| 1 | 0.047" | 0.059" | 75,000 | Diamond | 1 3/4" | 120 (Smooth) Silver | 5548N21 | 000000 | ||
| 1 | 0.071" | 0.059" | 55,000 | Diamond | 1 3/4" | 120 (Smooth) Silver | 5548N22 | 00000 | ||
| 1 | 0.374" | 0.16" | 25,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N14 | 00000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Taper
| |
Style 4 | Style 5 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, Composites, Fiberglass, Glass, Plastic, and Rubber | ||||||||||
3/32" Diameter Shank | ||||||||||
| 4 | 0.098" | 0.393" | 25,000 | Diamond | 1 3/8" | 100 (Smooth) Silver | 5548N15 | 000000 | ||
| 5 | 0.123" | 0.354" | 25,000 | Diamond | 1 3/8" | 100 (Smooth) Silver | 5548N23 | 00000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Ball
|
Style 2 |
Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Carbide, Ceramics, Composites, Fiberglass, Glass, Plastic, and Rubber | ||||||||||
3/32" Diameter Shank | ||||||||||
| 2 | 0.051" | 0.051" | 70,000 | Diamond | 1 3/4" | 100 (Smooth) Silver | 5548N17 | 000000 | ||
| 2 | 0.075" | 0.075" | 45,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N16 | 00000 | ||
| 2 | 0.091" | 0.091" | 40,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N18 | 00000 | ||
| 2 | 0.138" | 0.138" | 25,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N19 | 00000 | ||
| 2 | 0.169" | 0.169" | 25,000 | Diamond | 1 5/8" | 100 (Smooth) Silver | 5548N13 | 00000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Grinding and Polishing Kits for 3D Printed Parts
 |
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
No. of Pieces | Includes | Max. Rotation Speed, rpm | Abrasive Material | Grit (Surface Texture) | Each | |||
|---|---|---|---|---|---|---|---|---|
For Aluminum, Brass, Bronze, Copper, Fiberglass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, and Titanium | ||||||||
3/32" Diameter Shank | ||||||||
| 25 | Three Diamond Grinding Bits, Three Carbide Burs, Two Aluminum Oxide Polishing Bobs, Two Aluminum Oxide Grinding Wheels, One Diamond Cutoff Wheel, One Mandrel with 3/32" Shank, Three Engraving Cutters, Eight Aluminum Oxide Wheel Brushes, Two Silicon Carbide Grinding Wheels, Metal Case | 21,000 | Aluminum Oxide, Carbide, Diamond, Silicon Carbide | 80 (Smooth) to 280 (Extra Smooth) | 4763N1 | 0000000 | ||
Miniature Multipurpose Grinding Bits
 |  |  |  |  |  |
Style 1 | Style 2 | Style 3 | Style 4 | Style 5 | Style 6 |
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs. These bits have a diamond abrasive, so they’re extremely hard. Their 3/32" diameter shank and small head allow them to get into intricate spots. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Cylinder
| |
Style 4 | Style 6 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
3/32" Diameter Shank | |||||||||||
| 4 | 3/16" | 9/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/4" | 120 (Smooth) Yellow | 5595N18 | 000000 | ||
| 4 | 1/4" | 17/32" | 21,000 | Diamond | Vitrified Ceramic | 1 1/4" | 120 (Smooth) Yellow | 5595N17 | 00000 | ||
| 6 | 21/32" | 1/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N13 | 00000 | ||
| 6 | 21/32" | 3/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N11 | 00000 | ||
| 6 | 7/8" | 5/64" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N12 | 00000 | ||
| 6 | 7/8" | 3/32" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N14 | 00000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Cone
|
Style 3 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
3/32" Diameter Shank | |||||||||||
| 3 | 5/32" | 5/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N21 | 000000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Inverted Cone
|
Style 5 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
3/32" Diameter Shank | |||||||||||
| 5 | 7/32" | 5/32" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N15 | 000000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Taper
|
Style 2 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
3/32" Diameter Shank | |||||||||||
| 2 | 5/32" | 1/4" | 21,000 | Diamond | Vitrified Ceramic | 1 3/8" | 120 (Smooth) Yellow | 5595N16 | 000000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Ball
|
Style 1 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
3/32" Diameter Shank | |||||||||||
| 1 | 5/32" | 3/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 120 (Smooth) Yellow | 5595N19 | 000000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Multipurpose Grinding Bits
 |  |
Style 1 | Style 2 |
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic. They’re also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Cylinder
|
Style 1 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
1/8" Diameter Shank | |||||||||||
| 1 | 21/32" | 3/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 320 (Extra Smooth) Yellow | 5659N11 | 000000 | ||
| 1 | 7/8" | 5/64" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 320 (Extra Smooth) Yellow | 5659N12 | 00000 | ||
Disc
|
Style 2 |
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||
1/8" Diameter Shank | |||||||||||
| 2 | 21/32" | 1/16" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 320 (Extra Smooth) Yellow | 5659N13 | 000000 | ||
| 2 | 7/8" | 3/32" | 21,000 | Diamond | Vitrified Ceramic | 1 1/2" | 320 (Extra Smooth) Yellow | 5659N14 | 00000 | ||
Long-Life Rubber-Cushioned Abrasive Grinding Bits for Metals
 |
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits. Also known as mounted points and die grinder bits.
Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | 180 (Smooth) Green | 320 (Extra Smooth) Blue | 1000 (Extra Smooth) Yellow | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Max. Rotation Speed, rpm | Shape | Material | Bond Material | Shank Lg. | Each | Each | Each | |||||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, and Titanium | ||||||||||||||
1/8" Diameter Shank | ||||||||||||||
| 11/16" | 1/8" | 15,000 | Cylinder | Diamond | Rubber | 1 1/2" | 4859N13 | 000000 | 4859N16 | 000000 | 4859N19 | 000000 | ||
| 1" | 5/64" | 15,000 | Cylinder | Diamond | Rubber | 1 1/2" | 4859N12 | 00000 | 4859N15 | 00000 | 4859N18 | 00000 | ||
| 1" | 3/32" | 15,000 | Cylinder | Diamond | Rubber | 1 1/2" | 4859N11 | 00000 | 4859N14 | 00000 | 4859N17 | 00000 | ||
Miniature Rubber-Cushioned Abrasive Grinding Bits for Metals
 |  |  |  |
Style 1 | Style 2 | Style 3 | Style 4 |
Produce a smooth surface on precise, intricate grinding jobs. These bits are cushioned by rubber, so they create a smoother finish than other bits with similar grits. Made with a diamond abrasive, they last 10 to 20 times longer than rubber-cushioned bits without diamond. Their 3/32" diameter shank and small head allow them to get into intricate spots. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | 120 (Smooth) Green | 320 (Extra Smooth) Blue | 1000 (Extra Smooth) Yellow | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Dia. | Lg. | Max. Rotation Speed, rpm | Shape | Material | Bond Material | Shank Lg. | Each | Each | Each | |||||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, and Titanium | |||||||||||||||
3/32" Diameter Shank | |||||||||||||||
| 1 | 7/32" | 1/2" | 21,000 | Cone | Diamond | Rubber | 1 1/4" | 5619N14 | 000000 | 5619N21 | 000000 | 5619N27 | 000000 | ||
| 2 | 19/32" | 3/16" | 21,000 | Disc | Diamond | Rubber | 1 1/2" | 5619N15 | 00000 | 5619N22 | 00000 | 5619N28 | 00000 | ||
| 3 | 19/32" | 1/4" | 15,000 | Cylinder | Diamond | Rubber | 1 1/2" | 5619N16 | 00000 | 5619N23 | 00000 | 5619N29 | 00000 | ||
| 4 | 11/16" | 1/8" | 21,000 | Cylinder | Diamond | Rubber | 1 1/2" | 5619N13 | 00000 | 5619N19 | 00000 | 5619N26 | 00000 | ||
| 4 | 1 1/32" | 1/16" | 21,000 | Cylinder | Diamond | Rubber | 1 1/2" | 5619N12 | 00000 | 5619N18 | 00000 | 5619N25 | 00000 | ||
| 4 | 1 1/32" | 3/32" | 15,000 | Cylinder | Diamond | Rubber | 1 1/2" | 5619N11 | 00000 | 5619N17 | 00000 | 5619N24 | 00000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Burs for Masonry, Ceramics, and Composites
Cylinder with Flat Tip
 |  |
Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 5/8" | 2" | SA-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A11 | 000000 | ||
| 1/4" | 3/8" | 3/4" | 2 1/2" | SA-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A12 | 00000 | ||
| 1/4" | 1/2" | 1" | 2 3/4" | SA-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A13 | 00000 | ||
Cylinder with Flat-Cutter Tip
 | |
Diamond-Cut Tooth |
Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 5/8" | 2" | SB-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A312 | 000000 | ||
| 1/4" | 3/8" | 3/4" | 2 1/2" | SB-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A412 | 00000 | ||
| 1/4" | 1/2" | 1" | 2 3/4" | SB-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A512 | 00000 | ||
Cylinder with Round Tip
 |  |
Diamond-Cut Tooth |
Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 5/8" | 2" | SC-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A14 | 000000 | ||
| 1/4" | 3/8" | 3/4" | 2 1/2" | SC-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A15 | 00000 | ||
| 1/4" | 1/2" | 1" | 2 3/4" | SC-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A16 | 00000 | ||
Tree with Round Tip
 |  |
Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 5/8" | 2" | SF-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A21 | 000000 | ||
| 1/4" | 3/8" | 3/4" | 2 1/2" | SF-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A22 | 00000 | ||
| 1/4" | 1/2" | 1" | 2 3/4" | SF-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A23 | 00000 | ||
Tree with Pointed Tip
 |  |
Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 5/8" | 2" | SG-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A24 | 000000 | ||
| 1/4" | 3/8" | 3/4" | 2 1/2" | SG-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A25 | 00000 | ||
| 1/4" | 1/2" | 1" | 2 3/4" | SG-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A26 | 00000 | ||
Ball
 |  |
Diamond-Cut Tooth |
Ball burs are for curved surfaces, round slots, and round-bottom holes.
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 7/32" | 2" | SD-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A17 | 000000 | ||
| 1/4" | 3/8" | 5/16" | 2 1/8" | SD-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A18 | 00000 | ||
| 1/4" | 1/2" | 7/16" | 2 1/4" | SD-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A19 | 00000 | ||
Flame
 |  |
Flame | Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 1/2" | 2" | SH-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A27 | 000000 | ||
| 1/4" | 5/16" | 3/4" | 2 1/2" | SH-2 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A28 | 00000 | ||
| 1/4" | 1/2" | 1 1/4" | 3" | SH-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A29 | 00000 | ||
Oval
 |  |
Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | |||||||||
| 1/4" | 1/4" | 3/8" | 2" | SE-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A313 | 000000 | ||
| 1/4" | 3/8" | 5/8" | 2 3/8" | SE-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A413 | 00000 | ||
| 1/4" | 1/2" | 7/8" | 2 5/8" | SE-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A513 | 00000 | ||
Cone
 |  |
Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | ||||||||||
| 1/4" | 1/4" | 1/8" | 90° | 2" | SK-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A316 | 000000 | ||
| 1/4" | 1/4" | 3/16" | 60° | 2" | SJ-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A315 | 00000 | ||
| 1/4" | 3/8" | 3/16" | 90° | 1 15/16" | SK-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A415 | 00000 | ||
| 1/4" | 3/8" | 5/16" | 60° | 2 1/16" | SJ-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A414 | 00000 | ||
| 1/4" | 1/2" | 1/4" | 90° | 2" | SK-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A515 | 00000 | ||
| 1/4" | 1/2" | 7/16" | 60° | 2 3/16" | SJ-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A514 | 00000 | ||
Inverted Cone
 |  |
Diamond-Cut Tooth |
Head | Diamond-Cut Tooth (Extra-Fine Grit) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | ||||||||||
| 1/4" | 1/4" | 5/16" | 10° | 2" | SN-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A319 | 000000 | ||
| 1/4" | 3/8" | 3/8" | 15° | 2 1/8" | SN-2 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A418 | 00000 | ||
| 1/4" | 1/2" | 1/2" | 12° | 2 1/4" | SN-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A518 | 00000 | ||
Tapered Cone with Round Tip
 |  |
Diamond-Cut Tooth |
Round tapered cone burs are for tapered holes and slots with rounded bottoms.
Head | Diamond-Cut Tooth (Extra-Fine Grit) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | ||||||||||
| 1/4" | 1/4" | 5/8" | 14° | 2" | SL-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A317 | 000000 | ||
| 1/4" | 3/8" | 1 1/16" | 14° | 2 13/16" | SL-3 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A416 | 00000 | ||
| 1/4" | 1/2" | 1 1/8" | 14° | 2 7/8" | SL-4 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A516 | 00000 | ||
Tapered Cone with Pointed Tip
 |  |
Diamond-Cut Tooth |
Pointed tapered cone burs are for tapered holes and slots with pointed bottoms.
Head | Diamond-Cut Tooth (Extra-Fine Grit) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade No. | For Use On | Each | |||
Carbide | ||||||||||
| 1/4" | 1/4" | 1/2" | 22° | 2" | SM-1 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A318 | 000000 | ||
| 1/4" | 3/8" | 5/8" | 28° | 2 1/2" | SM-4 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A417 | 00000 | ||
| 1/4" | 1/2" | 7/8" | 28° | 2 5/8" | SM-5 | Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 4197A517 | 00000 | ||
Miniature Grinding Bit and Disc Sets
 |
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas. All have aluminum oxide bits for grinding hard metal.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
58 Pieces—58-piece sets include diamond bits for grinding metal, ceramics, and plastics.
No. of Pieces | Includes | Max. Rotation Speed, rpm | Abrasive Material | Color | Each | |||
|---|---|---|---|---|---|---|---|---|
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | ||||||||
1/8" Diameter Shank | ||||||||
| 58 | Six Aluminum Oxide Grinding Bits, Six Diamond Grinding Bits, 26 Cutoff Discs, One Collet, One Mandrel for Cutoff Discs, Six Cleaning Brushes, Six Engraving Cutters, Six Polishing Bobs, Plastic case | 21,000 | Aluminum Oxide, Diamond | Blue, Brown | 4475A12 | 000000 | ||
Miniature Multipurpose Grinding Bit Sets
 |
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes. Their 3/32” diameter shank and small head make them great for tasks with fine details.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Abrasive | ||||||||
|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Material | Bond Material | Grit (Surface Texture) | Each | |||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | ||||||||
3/32" Diameter Shank | ||||||||
| 6 | One Ball Grinding Bit with 1 1/2" Shank Lg., One Cone Grinding Bit with 1 1/2" Shank Lg., One Inverted Cone Grinding Bit with 1 1/2" Shank Lg., One Taper Grinding Bit with 1 3/8" Shank Lg., Two Cylindrical Grinding Bits with 1 1/4" Shank Lg., Plastic Block Stand | Diamond | Vitrified Ceramic | 120 (Smooth) Yellow | 5564N11 | 0000000 | ||
|
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
