DIN 84 Machine Screws | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Drive Style

Head Diameter

Rounded Head Style

Material

Fastener Head Type

Head Height

Threading

Thread Pitch

Tip Type

Thread Type

Finish

Thread Spacing

Thread Fit

Rounded Head Profile

Thread Direction

Hardness

Tensile Strength

30,000 psi to 99,999 psi

100,000 psi or greater

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

RoHS

REACH

237 Products

Stainless Steel Cheese Head Slotted Screws

These slotted cheese head screws won't rust or corrode from moisture and chemicals. They have a narrow profile, so they sneak past flanges and raised surfaces without snagging. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Certificate Type	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1 × 0.25 mm

				2	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A050	00000


				3	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A052	00000
				4	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A056	00000
				5	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A057	0000
				6	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A058	0000
				8	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A060	0000
				10	2	0.7	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A062	0000




						M1.2 × 0.25 mm

						2	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	Material Certificate	10	91800A075	00000


						3	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A077	00000
						4	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A079	0000
						5	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A081	00000
						6	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A083	00000
						8	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A085	00000
						10	2.3	0.8	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A087	0000




								M1.4 × 0.3 mm

								2	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A713	00000


								3	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A030	0000
								4	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A032	0000
								5	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A034	0000
								6	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A036	0000
								8	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A038	0000
								10	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A040	0000
								12	2.6	0.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A711	00000




										M1.6 × 0.35 mm

										2	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A002	0000


										3	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A003	0000
										4	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A004	0000
										5	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A005	0000
										6	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A006	0000
										8	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A008	0000
										10	3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A009	0000
12										3	1	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A010	0000
16	3									1	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A011	00000




		M2 × 0.4 mm

		3	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A108	00000


		4	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A110	00000
		5	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A012	00000
		6	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A013	00000
		8	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A015	0000
		10	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A017	0000
		12	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A019	00000
		14	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A018	00000
		16	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A021	0000
		20	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A022	0000
		25	3.8							1.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A023	00000




				M2.5 × 0.45 mm

				3	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A602	00000


				4	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A606	0000
				5	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A608	0000
				6	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A610	0000
				8	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A612	00000
				10	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A614	00000
				12	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A616	0000
				14	4.5					1.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A617	00000
				16	4.5	1.6				Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A618	00000
				20	4.5	1.6	Fully Threaded			70,000	DIN 84, ISO 1207	—	100	91800A619	00000
				25	4.5	1.6	Fully Threaded			70,000	DIN 84, ISO 1207	—	50	91800A624	00000


				30	4.5	1.6	Fully Threaded			70,000	DIN 84, ISO 1207	—	50	91800A626	00000




						M3 × 0.5 mm

						4	5.5			2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A113	00000


						5	5.5			2	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A114	0000
						6	5.5			2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A116	0000
						8	5.5	2		Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A118	0000
						10	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A120	00000
						12	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A122	00000
						14	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A124	00000
						16	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A126	00000
						20	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A128	00000
						25	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	Material Certificate	100	91800A130	00000
						30	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A132	00000


						35	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A134	00000
						40	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A136	00000
						45	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A138	00000
						50	5.5	2	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A140	00000




						M3.5 × 0.6 mm

						6	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A175	00000


						8	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A178	00000
						10	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A181	00000
						12	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A184	00000
						16	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A190	0000
						20	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A193	00000
						25	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A196	00000
						40	6	2.4	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A199	00000




			M4 × 0.7 mm

			4				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A712	00000


			5				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A214	00000
			6				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A216	00000
			8				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A218	00000
			10				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A220	00000
			12				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A222	00000
			14				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A224	00000
			16				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	100	91800A226	00000
			18				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A227	00000
			20				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A228	0000
			25				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A230	00000


			30				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A232	00000
			35				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A234	0000
			40				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A236	00000
			45				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A238	00000
			50				7	2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A240	0000
			60	7			2.6	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A242	00000
			70	7	2.6		Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A246	00000
			80	7	2.6		Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A250	0000




					M5 × 0.8 mm

					6		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A316	00000


					8		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A318	00000
					10		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A320	0000
					12		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A322	0000
					14		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A324	00000
					16		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A326	00000
					18		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A327	00000
					20		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A328	0000
					25		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A330	0000
					30		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A332	0000
					35		8.5	3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A334	00000


40					8.5		3.3	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A336	00000
45	8.5				3.3		Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A338	00000
50	8.5				3.3		Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A340	0000
60	8.5				3.3		Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A344	0000
70	8.5				3.3		Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A348	0000
80	8.5				3.3		Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A352	0000




					M6 × 1 mm

					8		10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A418	00000


					10		10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A420	00000
					12		10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A424	00000
		16			10		3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A426	00000
		20			10		3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A428	00000
		25			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	50	91800A430	00000
		30			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A438	00000
		35			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	Material Certificate	25	91800A440	00000
		40			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A442	00000
		45			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	25	91800A444	00000
		50			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A446	00000


		60			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A448	00000
		70			10	3.9	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A450	00000




						M8 × 1.25 mm

						12	13	5	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A550	00000


						16	13	5	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A558	0000
						20	13	5	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A562	0000
						25	13	5	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A566	0000
						30	13	5	Fully Threaded	70,000	DIN 84, ISO 1207	—	10	91800A568	00000
						40	13	5	Fully Threaded	70,000	DIN 84, ISO 1207	—	5	91800A570	00000


			Highly Corrosion-Resistant 316 Stainless Steel







								M1.6 × 0.35 mm

								3	3	1	Fully Threaded	100,000	DIN 84	—	50	91613A019	00000


								4	3	1	Fully Threaded	100,000	DIN 84	—	50	91613A020	00000
								5	3	1	Fully Threaded	100,000	DIN 84	—	50	91613A021	00000
								6	3	1	Fully Threaded	100,000	DIN 84	—	50	91613A022	00000
								8	3	1	Fully Threaded	100,000	DIN 84	—	50	91613A024	00000
								10	3	1	Fully Threaded	100,000	DIN 84	—	50	91613A025	00000
								12	3	1	Fully Threaded	100,000	DIN 84	Material Certificate	50	91613A026	00000




										M2 × 0.4 mm

										3	3.8	1.3	Fully Threaded	100,000	DIN 84	—	100	91613A031	00000


4	3.8									1.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A032	00000
5	3.8									1.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A034	0000
6	3.8									1.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A036	0000
8	3.8									1.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A038	00000
10	3.8									1.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A040	00000




										M2.5 × 0.45 mm

										4	4.5	1.6	Fully Threaded	100,000	DIN 84	—	100	91613A060	00000


										5	4.5	1.6	Fully Threaded	100,000	DIN 84	—	100	91613A061	00000
										6	4.5	1.6	Fully Threaded	100,000	DIN 84	—	100	91613A062	00000
										8	4.5	1.6	Fully Threaded	100,000	DIN 84	—	100	91613A064	00000
										10	4.5	1.6	Fully Threaded	100,000	DIN 84	—	100	91613A066	00000




		M3 × 0.5 mm

		5										5.5	2	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A143	00000


		6			5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A145	00000
		8			5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A147	00000
		10			5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	—	100	91613A149	00000
		12			5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A151	0000
		20			5.5							2	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A159	00000




												M3.5 × 0.6 mm

			5									6	2.4	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A181	0000


			6	6								2.4	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A182	0000
			8	6								2.4	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A184	0000
			10	6		2.4						Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A186	0000




						M4 × 0.7 mm

						5	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A223	0000


						6	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A224	00000
						8	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A226	00000
						10	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A228	00000
						12	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	—	50	91613A230	00000
						16	7					2.6	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A240	0000




								M5 × 0.8 mm

								8	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A337	0000


								10	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A339	0000
								12	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A341	00000
								16	8.5			3.3	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A348	0000
								20	8.5			3.3	Fully Threaded	100,000	DIN 84	—	25	91613A352	00000
30								8.5	3.3			Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A364	00000




								M6 × 1 mm

								8	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	—	10	91613A416	0000


								10	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	—	25	91613A418	00000
								12	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	—	10	91613A420	0000
								16	10			3.9	Fully Threaded	100,000	DIN 84, ISO 1207	—	10	91613A422	0000
								20	10			3.9	Fully Threaded	100,000	DIN 84	—	25	91613A426	00000
								25	10			3.9	Fully Threaded	100,000	DIN 84	—	25	91613A428	00000

Steel Cheese Head Slotted Screws

One of the narrowest rounded head styles, the cheese head fits into tight spaces, such as crowded electrical panels. With only two contact points, the slotted drive can't withstand much torque, so it's best to hand-tighten them.

Length is measured from under the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Certificate Type	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M1.6 × 0.35 mm

				2	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	—	10	91460A001	00000


				3	3	1	Fully Threaded	60,000	DIN 84	—	10	91460A002	0000
				4	3	1	Fully Threaded	60,000	DIN 84	—	10	91460A003	0000
				5	3	1	Fully Threaded	60,000	DIN 84	—	10	91460A004	0000
				6	3	1	Fully Threaded	60,000	DIN 84	—	10	91460A005	0000
				8	3	1	Fully Threaded	60,000	DIN 84, ISO 1207	—	10	91460A007	0000




						M2 × 0.4 mm

						3	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A021	0000


						4	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A023	0000
						5	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A025	0000
						6	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A027	0000
						8	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A015	0000
						10	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A018	0000
						12	3.8	1.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A019	0000




								M2.5 × 0.45 mm

								3	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A068	00000


								4	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A069	0000
								5	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A070	0000
								6	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A071	0000
								8	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A073	0000
								10	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A075	0000
								12	4.5	1.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A077	0000




										M3 × 0.5 mm

										4	5.5	2	Fully Threaded	60,000	DIN 84	—	100	91460A109	0000


										5	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A110	0000
										6	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A111	0000
										8	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A113	0000
										10	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A115	0000
										12	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A117	0000
										16	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A120	0000
										20	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A123	0000
										25	5.5	2	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A125	0000




										M4 × 0.7 mm

		5	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A138	0000


		6	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	Material Certificate	100	91460A139	0000
		8	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A140	0000
		10	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A144	0000
		12	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A148	0000
		16	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A154	0000
		20	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A168	0000
		25	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A176	0000
		30	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A180	0000
		35	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A184	00000
		40	7							2.6	Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A187	00000




				M5 × 0.8 mm

				6	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A220	00000


				8	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A222	00000
				10	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A224	00000
				12	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A228	00000
				16	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A232	00000
				20	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A242	00000
				25	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A252	00000
				30	8.5					3.3	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A254	00000
				35	8.5	3.3				Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A256	0000
				40	8.5	3.3	Fully Threaded			60,000	DIN 84, ISO 1207	—	25	91460A258	0000




						M6 × 1 mm

						8	10			3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A312	00000


						10	10			3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A316	00000
						12	10			3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	100	91460A318	00000
						16	10			3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A321	0000
						20	10			3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A326	0000
						25	10			3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	50	91460A330	00000
						30	10	3.9		Fully Threaded	60,000	DIN 84, ISO 1207	—	25	91460A332	0000
						35	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	Material Certificate	25	91460A334	0000
						40	10	3.9	Fully Threaded	60,000	DIN 84, ISO 1207	—	25	91460A336	00000