Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration. Water-based coatings are low odor, so they’re a good option for use in enclosed areas. Apply with a brush, roller, or sprayer.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings. Apply with a brush, roller, or sprayer.

These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention. Apply with a brush, roller, or sprayer. They're often used as a topcoat over epoxy coatings.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust. Remove loose rust and dirt before application. Apply with a brush, roller, or sprayer.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications. Apply with a brush, roller, or sprayer.